• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.949-956
• /
• 2005

In this paper, a new CPW-fed cross shape fractal antenna having a self-affinity is presented. This novel configuration, which has anisotropic scaling symmetry, makes smaller profile characteristic compared to the fractal antenna using a self-similarity. Increase of the iteration coefficient, which leads to decrease of the fundamental resonant frequency, shows a good impedance matching condition and multi-band characteristics due to new surface current paths. The radiation patterns are similar to those of monopole antennas. In the K3 stage of iteration, the proposed antenna shows a measured maximum gain 2.27 dBi at 940 MHz. A commercially available software based on the FDTD algorithm has been used to obtain the predicted results. In addition, an RT/Duroid 5880 substrate has been employed for the experimental results.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.241-248
• /
• 1998

In accordance with tendency to miniaturization and high frequency operation of electronic products, extensive efforts of miniaturizing magnetic devices such as inductors, transformers and magnetic sensors are being made. In order to study on fabrication and characteristic of micro-magnetic devices, we carried out two sets of experiments. One is to develop a magnetic film that is suitable for high frequency operation, and the other is to develop the fabrication processes for realizing the micro-coil with meander shape. Magnetic films were composed of FeTa(N,C) fabricated by DC magnetron sputtering system. Their microstructures were nanocrystalline structure and magnetic properties showed Bs:13~17 kG, Hc:0.1~0.2 Oe and $\mu$':2000~4000. Cu coil pattern fabricated by selective electroplating process showed good electrical conductivity. In the case of air core inductors, inductance (L) of 50 nH, resonance frequency $(f_R)$ of 700 MHz, and quality factor (Q) of 30 at 200 MHz could be obtained. In the case of close type magnetic inductors, inductance (L) of 150 nH, resonance frequency $(f_R)$ of 100 MHz, and quality factor (Q) of 4 at 10~30 MHz could be obtained.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.334-340
• /
• 2008

We investigated the electromagnetically induced transparency (EIT) and the Hanle spectrum in a paraffin coated Rb vapor cell. The EIT spectrum was observed in the $F_g=2$, $3{\rightarrow}F_e=3$ transition of the $^{85}Rb$ $D_1$-line by using two independent external cavity diode lasers, and the Hanle spectrum was observed by using one external cavity diode laser in the $\Lambda$-type scheme between the Zeeman sublevels of the $F_g=2{\rightarrow}F_e=1$ transition of the $^{87}Rb$ $D_1$-line. In the Hanle spectrum, we could observe the dual-structured spectrum in the paraffin coated vapor cell. We investigated the dual-structured lineshape by applying an external magnetic field, and varying the direction of the magnetic field. The narrow linewidth of dual-structured EIT was measured to be approximately 200 Hz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.38-44
• /
• 2019

This paper proposes fingerprint-based positioning methods which can be used in a magnetic resonant wireless power transfer(WPT) system and verifies their performance. A new receiver coil with small orthogonal auxiliary coils is proposed to measure magnetic field signals in three axial directions. The magnitude and phase characteristics of the three-axis electromotive force can be obtained by using the proposed coil. To predict a position with the measured values, we propose a lookup table-based method and linear discriminant analysis-based method. For verification, the proposed methods are applied to predict 75 positions of the 6.78 MHz WPT system, and the performances such as accuracy and computation time are compared.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1825-1831
• /
• 2011

One of the major trends in traction power electronics is increasing the switching frequencies. The advances in the frequency elevation have made it possible to reduce the total size and weight of the passive components such as capacitors, inductors and transformers in the DC/DC converter and hence to increase the power density. The traction dynamic performance is also improved. This document describes several aspects relating to the design of resonant DC/DC converter operating at high frequency(10KHz) and the converter topologies and the control method of MAGLEV, which result in soft switching, are discussed.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.52-57
• /
• 1997

We report an investigation of the statistical fluctuations of the two-mode laser output as the asymmetry parameter is varied. The above results relate to computer solutions of the coupled Langevin equations both with and without pumping fluctuations. We find that as the asymmetry parameter is changed positively, the mean intensity of one mode is increased because the normalized intensity auto-correlation is decreased so that the natural dwell time is lengthen. The laser output does respond to a sinusoidally injected asymmetry parameter for small pump parameter.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.4
• /
• pp.221-226
• /
• 2018

In this paper, the power transfer efficiency analysis based on the resonant repeater in a magnetic resonance wireless power transfer system is proposed. The efficiency of the magnetic resonance method was verified by comparing the general frequency with the resonance frequency. The resonance repeater was arranged to increase the efficiency and increase the transfer distance. When using resonant repeaters, the maximum efficiency increase is about 36.23[%] and the transfer distance was extended to more than 20[cm]. Through this study, confirmed the effect of using resonance repeaters in wireless power transfer system. As a result, it can be expected that the overall technology related to wireless power transfer system will be more valuable for energy-IT technology.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.243-246
• /
• 2003

평균 입도가 $100{\mu}m$인 $Fe_{36}Co_{62}Ge_2$ 합금 분말과 $10wt\%$의 페놀계 고분자 바인더, 그리고 평균 입도가 $1.36{\mu}m$인 WC 분말을 SPEX Mixer/Mill에 넣고 8시간동안 혼합한 후 $150^{\circ}C$에서 Warm press를 이용하여 0.9 ton 의 압력으로 2시간 동안 유지하였다. VSM을 사용하여 자기적 특성을 조사한 결과 WC의 첨가량이 증가할수록 포화자화값(Ms)는 $174\~128\;emu/g$로 감소하였다. 또한 스트레인게이지를 이용하여 자기변형을 측정하였다. WC의 분포를 알아보기 위해 전자현미경으로 복합체의 단면을 관찰하였다. WC의 함량이 $10\~30wt\%$로 증가할수록 밀도와 영률(Young's Modulus) 값이 각각 $5.15\~6.27\;g/cc,\;43.5\~93.6\;GPa$ 로 증가하였다. 특히 영률은 WC를 $30wt\%$로 첨가하였을 때의 값이 첨가하지 않았을 때보다 2배 이상 증가하였다. 그러나 비자성상의 첨가로 희석효과가 나타났으며 길이 방향으로의 자기변형값$(\lambda_{ll})$과 $d_{33}$의 경우 각각 $18\%$와 $20\%$ 정도가 감소되었다. 이러한 기계적 특성의 향상은 길이 10mm의 자기변형 복합체의 공진 주파수를 71 kHz 증가시키게 되며, 따라서 초음파 진동소자용으로서의 상업적 활용범위를 증가 가능성을 제시하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.47-51
• /
• 2014

In this paper, unit cell and arrayed cover for improving the transfer efficiency of resonant wireless power transfer system is proposed. We used the characteristic of zero refractive index for focusing a magnetic field between the transmitting resonator and receiving resonator. For zero refractive index, we designed the unit cell structure that have a negative value of effective permeability. The size of proposed unit cell based on metamaterial structure is $70mm{\times}70mm{\times}3.2mm$, operating frequency is 13.56 MHz. And, the size of arrayed cover is $400mm{\times}400mm{\times}3.2mm$, is consists of 2-layers. The transfer efficiency of the proposed wireless power transfer system are 94.8 %, 93.2 %, 91.4 %, 90.8 % at 100 mm, 200 mm, 300 mm and 400 mm (distance between transmitting and receiving resonator), respectively. And proposed WPT system has a transfer efficiency high than 90 % over the overall distances.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.300-304
• /
• 2015

This paper presents an omnidirectionally beam-steerable orthogonal loop resonator for wireless power transfer. The resonator is composed of two orthogonal loops. These connections of two loops and the current direction on the loops are determined by the control of switch. The magnetic field direction is determined by the vector sum of each loop current. The beam is steerable to eight directions by four switch modes. Using the suitable switch mode, the simulation and measurement efficiencies in the whole azimuthal direction are 56.3~60.0 %(deviation 3.7 %) and 41.2~48.7 %(deviation 7.5 %), respectively. The results show a little variation of transmission efficiency in the azimuthal direction.