• Title/Summary/Keyword: 자기회로설계

Search Result 132, Processing Time 0.042 seconds

Design of DC Solenoid Actuator applied in Electric Vehicle Relay (전기자동차 Relay 용 DC Solenoid actuator 설계)

  • Lee, Seo-Hyun;Yoon, Hee-Sung;Koh, Chang-Seop
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1029-1030
    • /
    • 2011
  • 최근 녹색성장과 함께 전기자동차에 대한 관심이 높아짐에 따라 전기자동차 Relay 용 Solenoid Actuator에 대한 관심 또한 높아지고 있다. DC Solenoid Actuator는 Electric Vehicle relay(EV-Relay)의 동작을 담당하므로, EV-Relay의 핵심 부분이라 할 수 있다. 본 논문에서는 등가자기회로법을 통해 EV-Relay가 동작하기 위한 DC Solenoid Actuator를 설계하였다.

  • PDF

An Electronic Ballast wish High Power Factor for High Pressure Sodium Lamps (고역률 고압나트륨램프용 전자식 안정기)

  • 김순기;노재엽;이진우;최종문
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2001.11a
    • /
    • pp.115-118
    • /
    • 2001
  • 본 논문에서는 역률 개선용 제어 IC를 사용하여 고압나트륨램프의 역률을 개선시킨 전자석 안정기를 제안하였다. 또한 인버터 회로를 설계하여 시동전압의 과도특성을 해석하였으며, 전원측에 EMI 필터를 설계하여 전자식 안정기 시스템을 보호하였다. 자기식 안정기와 전자식 안정기에 대한 역률, THD 및 광속 등의 전기적 특성을 비교 측정하였다. 제안된 고압나트륨램프용 전자식 안정기의 출력을 측정한 결과 역률은 99.9[%], THD는 4.51[%]로 나타났다.

  • PDF

Capacitive Coupling LLC wireless Power Transfer Converter with front and back glasses of electric vehicle (전기자동차 전후면 유리를 이용한 커패시티브 커플링 LLC 무선전력 전송 컨버터)

  • You, Young Soo;Yi, Kang Hyun
    • Proceedings of the KIPE Conference
    • /
    • 2016.07a
    • /
    • pp.193-194
    • /
    • 2016
  • 일반적으로 자기장을 이용하는 무선전력 전송 방식은 노이즈, 금속 영향성, 발열, 위치에 따른 에너지 효율이 달라지는 문제점을 가지고 있다. 본 연구에서는 전기장을 이용하여 자동차 전, 후면에 있는 유리를 통해 전기자동차를 무선으로 충전하는 컨버터를 제안한다. 송, 수신부 회로는 유리를 유전체로 만들어진 작은 커패시터와 Quality-factor (Q-factor)를 보상하기 위해 두 개의 변압기를 이용한 임피던스 변환과 스위칭 손실을 최소화하기 위한 LLC직렬공진 동작을 사용하였다. 그 결과 제안하는 컨버터는 대용량 전력전송과 소프트 스위칭을 통한 높은 효율을 얻을 수 있었다. 제안하는 회로의 동작과 특성을 검증하기 위하여 유리를 이용한 커패시터를 구성하고 1.2KW 송, 수신 회로를 설계 및 제작하여 검증 하였다.

  • PDF

Design of Local Field Switching MRAM (Local Field Switching 방식의 MRAM 설계)

  • Lee, Gam-Young;Lee, Seung-Yeon;Lee, Hyun-Joo;Lee, Seung-Jun;Shin, Hyung-Soon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.45 no.8
    • /
    • pp.1-10
    • /
    • 2008
  • In this paper, we describe a design of a 128bit MRAM based on a new switching architecture which is Local Field Switching(LFS). LFS uses a local magnetic field generated by the current flowing through an MTJ. This mode reduces the writing current since small current can induce large magnetic field because of close distance between MTJ and the current. It also improves the cell selectivity over using conventional MTJ architecture because it doesn't need a digit line for writing. The MRAM has 1-Transistor 1-Magnetic Tunnel Junction (IT-1MTJ) memory cell structure and uses a bidirectional write driver, a mid-point reference cell block and a current mode sense amplifier. CMOS emulation cell is adopted as an LFS-MTJ cell to verify the operation of the circuit without the MTJ process. The memory circuit is fabricated using a $0.18{\mu}m$ CMOS technology with six layers o) metal and tested on custom board.

A Study on the Fabrication of the Low Noise Amplifier Using Resistive Decoupling circuit and Series feedback Method (저항결합 회로와 직렬 피드백 기법을 이용한 저잡음 증폭기의 구현에 관한 연구)

  • 유치환;전중성;황재현;김하근;김동일
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2000.10a
    • /
    • pp.190-195
    • /
    • 2000
  • This paper presents the fabrication of the LNA which is operating at 2.13∼2.16 GHz for IMT-2000 lot-end receiver using series feedback and resistive decoupling circuit. Series feedback added to the source lead of a transistor keep the low noise characteristics and drop the input reflection coefficient of amplifier simultaneously. Also, it increases the stability of the LNA. Resistive decoupling circuit is suitable for input stage matching because a signal at low frequency is dissipated by a resistor in the matching network The amplifier consist of GaAs FET ATF-10136 for low noise stage and VNA-25 which is internally matched MMIC for high gain stage. The amplifier is fabricated with both the RF circuits and self bias circuit on the Teflon substrate with 3.5 permittivity. The measured results of the LNA which is fabricated using above design technique are presented more than 30 dB in gain P$\_$ldB/ 17 dB and less than 0.7 dB in noise figure, 1.5 in input$.$output SWR(Standing Wave Ratio).

  • PDF

고에너지 입자 검출기 STEIN의 아날로그회로 설계

  • Kim, Jin-Gyu;Nam, Ji-Seon;Seo, Yong-Myeong;Jeon, Sang-Min;Mcbride, Steve;Larson, Davin;Jin, Ho;Seon, Jong-Ho;Lee, Dong-Hun;Lin, Robert P.;Harvey, Peter
    • Bulletin of the Korean Space Science Society
    • /
    • 2010.04a
    • /
    • pp.37.5-38
    • /
    • 2010
  • 경희대학교 우주탐사학과에서는 우주공간 탐사를 위해 Trio(TRiplet Ionospheric Observatory)-CINEMA(Cubesat for Ions, Neutrals, Electrons and MAgnetic fields)로 명명된 초소형 위성을 개발하고 있다. 과학임무는 지구 저궤도에서 고에너지 입자를 관측하는 것이며, 이를 위해 고에너지 (2~300keV) 입자 검출기와 자기장 측정기가 탑재된다. 저에너지 입자 검출기 시스템인 STEIN(SupraThermal Electrons, Ions, Neutrals)은 $1\times4$ Array의 개선된 실리콘 검출기와 이온, 전자, 중성입자를 분리할 수 있는 정전장 편향기, 그리고 신호를 처리하는 전자회로로 구성되어있다. 설계된 전자회로는 매우 작은 검출기 기판, 아날로그 기판과 디지털 기판으로 이루어져 있고, 475mW 이하의 저 전력으로 동작한다. 또한 2~100keV의 에너지를 1keV이하의 해상도로 30,000event/sec/pixel 까지 관측 할 수 있도록 회로를 설계하였다. 센서로 들어온 입자로 인해 발생한 펄스의 신호는 4개의 아날로그 회로가 담당하게 되는데, Folded cascode amplifier를 배치하여 증폭률을 높인 Charge sensitive amplifier를 통해 신호를 증폭하고, $2{\mu}s$ unipolar gaussian shaping amplifier를 통해 읽기 쉽게 처리된 신호를 상한파고선별기와 하한파고 선별기를 통해 유효 값 여부를 판단하고, 피크 검출기를 통해 피크의 타이밍을 측정한 뒤 신호를 아날로그-디지털 변환 회로를 통하여 8bit의 값으로 나타내어, 입자들의 Spectrum을 측정하게 된다. 크기와 소비전력이 적음에도 검출성능이 우수하기 때문에 이 시스템은 향후 우주탐사 시스템에 있어 매우 중요한 역할을 수행 할 것으로 생각한다.

  • PDF

Design to Reduce and Analysis of Loss using Finite Element Method on One Phase Inductance Motor (자기유한요소법을 이용한 단상유도전동기 코어의 손실해석 및 손실저감설계기법에 관한 연구)

  • Kim Dong Sok;Sung Il Kwon;Park Gwan Soo;Hahn Sung Chin
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.977-979
    • /
    • 2004
  • 전기기기가 빠르게 발전함에 따라 전기기기의 핵심부분인 전동기의 활용도가 매우 넓어지고 있다. 따라서 전동기의 효율향상은 전기기기의 정확한 작동 및 비용절약에 있어 중요한 부분이 되고 있다. 따라서 전동기에서 발생하는 손실의 정확한 원인과 해결방법을 제시하여야 한다. 이에 지금까지의 연구들은 대부분 제어회로를 이용한 고주파성분 제거나 자기손실이 적은 재질개발에 의존하고 있다. 그러나 이들 방법들은 기존의 기동제어회로에 새로운 소자나 제어회로를 부착하거나 고가의 소재를 사용하여야 하는 단점이 있다. 이에 본 연구에서는 정자계 유한요소법과 손실곡선을 이용한 단상유도전동기 코어의 손실해석 및 손실저감을 위한 설계기법을 제시하였다.

  • PDF

Multi-Band Rejection Slot-Shaped DGS and Its Equivalent Circuit Model (다중 대역 슬롯형 DGS와 등가 회로 모델)

  • Woo, Duk-Jae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.5
    • /
    • pp.537-543
    • /
    • 2010
  • This paper presents a slot-shaped defected ground structure(DGS) which has multi-band rejection property. The proposed structure, in which the spiral slot-shaped defects with different size are aligned in the transverse direction to the guiding direction of the coplanar waveguide(CPW), provides multiple resonance frequencies. Compared with the simulated results, the band rejection characteristic is in good agreement with the measurement. Also, an equivalent circuit model of the proposed structure is presented, where the DGS on the ground plane is modeled as LC-resonators. This resonators are inductively coupled to the signal line through mutual inductance. From the equivalent circuit model, multi-band rejection property was derived.

Design of Moving Magnet Type Optical Pickup Actuator with High Frequencies of the Flexible Modes (높은 유연 모드 주파수를 갖는 가동 자석형 광 픽업 액추에이터 개발)

  • Song, Myeong-Gyu;Kim, Yoon-Ki;Park, Young-Pil;Yoo, Jeong-Hoon;Park, No-Cheol
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.17 no.11
    • /
    • pp.1043-1049
    • /
    • 2007
  • Data transfer rate and storage capacity are main criteria of the performance of the optical disk drive. The highest data transfer rate and the largest storage capacity is most desirable. To increase these performances, the actuator of the optical disk drive should have a high servo bandwidth to compensate the vibration of an optical disk. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to increase the natural frequencies of the flexible modes. In this paper, we suggested a moving magnet type actuator having high frequencies of the flexible modes. Generally, the moving magnet type actuator has an advantage to increase the natural frequencies of the flexible modes because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of EM(electromagnetic) circuit cut down driving sensitivities of the actuator. To improve driving sensitivities, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, driving sensitivities and the natural frequencies of the flexible modes were improved by using DOE(design of experiments) for electromagnetic circuit and modifying the lens holder.

Circuit Design for Noise Removal of Sine Wave Hall Sensor Signal (정현파 Hall Sensor 신호의 잡음제거를 위한 회로설계)

  • Jeong, Sungin
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.21 no.4
    • /
    • pp.135-141
    • /
    • 2021
  • Interest is growing in the design and development of square wave driven BLDC permanent magnet motors suitable for industrial automation, and the development of position detection circuits and drivers. However, this motor is somewhat limited in its application despite the price and functional advantages due to the decrease in efficiency due to switching loss and vibration and noise. In the process of designing and assembling a BLDC motor, the magnetic pole angle is not uniform or the magnetic flux distribution is distorted due to problems in magnetic circuit design or product non-uniformity in the assembly process. Therefore, these things cause position detection deviation and deteriorate the motor characteristics. In addition, the sine wave driven BLDC system can operate stably only when the signal generated from the position sensor is accurately fed back to the driver. However, since the generated signal cannot perform stable position detection due to the occurrence of DC offset component due to magnetic flux density deviation or magnetization technology, which is an external influence, this study intends to study the proposed circuit that can remove the DC offset component.