• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.415-418
• /
• 2007

가까운 미래에 인간생활에 활용될 지능형 로봇은 인간과 공존하면서도 효과적으로 인간을 도와줄 수 있는 인간친화형 로봇이라 할 수 있다. 이러한 것을 실현하기 위해서 로봇은 미지의 환경 내에서 자신의 위치 및 방향을 인식해야 할 필요가 있다. 더욱이, 이것은 일상생활에서 자연스럽게 이뤄지는 것이 당연하다. 로봇을 제어하는 가장 중요한 문제중의 하나로서 이동로봇의 주행에서의 위치불확실성을 해결함으로서 로봇의 위치를 추정하는 것이 바람직하다 할 수 있다. 본 논문에서는 실내외 공간에서 인간을 포한함 이동물체의 영상정보를 이용하여 이동로봇의 자기위치를 인식하기 위한 방법을 제시하고 있다. 제시한 방법은 로봇자체의 DR센서 정보와 카메라에서 얻은 영상정보로부터 로봇의 위치추정방법을 결합 한 것이다. 그리고 이동물체의 이전 위치정보와 관측 카메라의 모델을 사용하여 이동물체에 대한 영상프레임 좌표와 추정된 로봇위치 간의 관계를 표현할 수 있는 식을 제시하고 있다. 또한 이동하는 인간과 로봇의 위치와 방향을 추정하기 위한 제어방법을 제시하고 이동로봇의 위치를 추정하기위해서 칼만필터 방법을 적용하였다. 그리고 시뮬레이션 및 실험을 통하여 제시한 방법을 검증하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.75-75
• /
• 2010

배변 후 toilet flushing 시 다량의 세균을 포함한 물방울들이 화장실 곳곳으로 퍼지는 현상이 있다. 이러한 현상을 방지하기 위해 변기 뚜껑에 자기 세정 효과를 갖는 초발수 표면을 위해 플라즈마를 이용한 표면 처리가 시도되고 있으며, 이 연구의 일환으로 flushing시의 변기내의 유동 분석을 초고속 카메라를 이용하여 수행하였다. Toilet flushing 시 물 튀김 현상은 육안으로는 잘 관찰하기 어렵지만 최고 1000 frame/sec의 속도를 갖는 CCD camera를 이용하여 정량적으로 물 튀김에 의한 오염 가능성을 촬영 분석하였다, 두 번째로 소변 시의 변기 표면에서의 튀김현상을 분석하기 위하여 소변의 발사각도 및 속도를 가장 실제와 유사한 조건으로 설정하고 이를 상용 전산 유체 역학 소프트웨어인 CFD- ACE+의 자유 표면 계산 기능과 두 가지 유체(액체 및 기체)의 혼합 계산 모델을 사용한 계산 결과와 비교 하였다. 그 결과 변기 표면의 표면장력을 아주 작게 설정한 경우(작은 접촉각, 친수성)에는 중력의 영향을 고려하였음에도 불구하고 소변이 변기에 충돌 후 상부로 상당부분 튀어 올라가는 결과를 얻었다. 여러 가지 각도와 발사 속도, 실제의 인체와 유사한 발사 부위의 형상 변화로 인한 유체 표면의 난류 발생과 이에 따른 변기 표면 충돌 현상 변화 등을 수치적으로 고찰하였다. 한 예로 5.6 mm 직경의 노즐에서 소변이 나오는 경우를 발사 속도 3 m/s, 각도 $10^{\circ}$로 주고 중력을 고려하여 10초 동안을 계산하면, 방뇨 시 toilet bowl 내부에서의 물의 유동과 toilet 표면을 맞고 튀기는 현상을 그림 1과 같이 볼 수 있었다.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.2 s.10
• /
• pp.83-89
• /
• 2003

In this study, a new coded targets that being suitable for a Mobile Mapping System and method of automated target recognition and coordinates determination of center point was developed, the purpose of a Mobile Mapping System is acquisition and logging data around the road for the camera calibration and the Exterior orientation of system, target installed previously and CCD cameras captured the image, target center point was observed by hands, but using coded target, target recognition and center point observation process will be automated effectively, in addition we keeped up the consistency of photo coordinates observation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.59-64
• /
• 2001

In this paper it was proposed method that solve problems of method to segment region of zero disparity and algorithm that extract binocular disparity to estimate position of object by vergence movement of moving stereo cameras experimented to compare those. There was not change of density value almost in region that change of critcal value was not found almost in image, because a high critical value was set so that critical value may be kipt changelessly about all small regions in studied treatise so far. The corresponding points were extracted wrongly by the result. By because the characteristics of small region was evaluated by autocorrelation and the critical value was established that may be proportional to the autocorrelation value, it was confirmed that corresponding points are not extracted almost by mistake and binocular disparity could by extracted with high speed.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.189-194
• /
• 2016

Recently, there is increasing demand for image processing technology while activated the use of equipments such as camera, camcorder and CCTV. In particular, research and development related to 3D image technology using the depth camera such as Kinect sensor has been more activated. Kinect sensor is a high-performance camera that can acquire a 3D human skeleton structure via a RGB, skeleton and depth image in real-time frame-by-frame. In this paper, we develop a system. This system captures the motion of a 3D human skeleton structure using the Kinect sensor. And this system can be stored by selecting the motion file format as trc and bvh that is used for general purposes. The system also has a function that converts TRC motion captured format file into BVH format. Finally, this paper confirms visually through the motion capture data viewer that motion data captured using the Kinect sensor is captured correctly.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.81-92
• /
• 1998

A new hybrid technique using several sub-populations having completely different evolutionary behaviors is proposed to increase the possibility to quickly find the global optimum of continuous optimization problem. It has three sub-populations. Two NPOSA algorithms showing good performance in the problem having a rugged fitness function are applied to two sub-populations and a self-adaptive evolutionary algorithm to the other sub-population. Sub-populations evolve in different manners and the interaction among these sub-populations lead to the global optimum quickly. The efficiency of this technique is verified through benchmark test functions. Finally, the algorithm with three sub-populations has been applied to seek for the optimal camera calibration parameters. After an error function has been defined using measured feature points of a calibration block, it has been shown that the algorithm searches for the camera parameters that minimize the error function.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.55-66
• /
• 2012

Purpose : During brain MRI scanning, subject's head motion can adversely affect MRI images. To minimize MR image distortion by head movement, we developed an optical tracking system to detect the 3-D movement of subjects. Materials and Methods: The system consisted of 2 CCD cameras, two infrared illuminators, reflective sphere-type markers, and frame grabber with desktop PC. Using calibration which is the procedure to calculate intrinsic/extrinsic parameters of each camera and triangulation, the system was desiged to detect 3-D coordinates of subject's head movement. We evaluated the accuracy of 3-D position of reflective markers on both test board and the real MRI scans. Results: The stereo system computed the 3-D position of markers accurately for the test board and for the subject with glasses with attached optical reflective marker, required to make regular head motion during MRI scanning. This head motion tracking didn't affect the resulting MR images even in the environment varying magnetic gradient and several RF pulses. Conclusion: This system has an advantage to detect subject's head motion in real-time. Using the developed system, MRI operator is able to determine whether he/she should stop or intervene in MRI acquisition to prevent more image distortions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.438-444
• /
• 2004

The intelligent robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robots need to recognize their position and posture in known environment as well as unknown environment. Moreover, it is necessary for their localization to occur naturally. It is desirable for a robot to estimate of his position by solving uncertainty for mobile robot navigation, as one of the best important problems. In this paper, we describe a method for the localization of a mobile robot using image information of a moving object. This method combines the observed position from dead-reckoning sensors and the estimated position from the images captured by a fixed camera to localize a mobile robot. Using the a priori known path of a moving object in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a moving object and the estimated robot's position. Since the equations are based or the estimated position, the measurement error may exist all the time. The proposed method utilizes the error between the observed and estimated image coordinates to localize the mobile robot. The Kalman filter scheme is applied for this method. its performance is verified by the computer simulation and the experiment.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.87-96
• /
• 2011

Recently mobile users can access to internet using smart phone at any place and any time, through which they can search and share information. In addition, as the sensors with high-tech functions become cheaper and miniaturized along with the development of MEMS (micro-electo mechanical systems) technology, the extent to utilize smart phone is increasing. Smart phone is equipped with various sensors such as high-resolution camera, GPS, gyroscope and magnetic sensor, which is an appropriate system configuration for remote monitoring research using camera. The remote monitoring system requires camera for video and internet network to send video, for which it has a limitation that it is influenced by the monitoring location. This study is aimed to design and develop the monitoring app. which can be remotely monitored using smart phone technology. The developed monitoring app was designed to take images of ROI (region of interest) within the specified time and to automatically send the images to the server. The developed app. is also possible to be remotely controlled by SMS (short message service). The monitoring proposed in this study can take high-resolution images using CMOS built in the smart phone and send the images and information to the server automatically at any place and any time using 3G and Wi-Fi networks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.147-153
• /
• 2014

In this paper, we present a non-dyadic lens distortion correction model and image restoration method based on local self-similarity to remove jagging and blurring artifacts in the peripheral region of the geometrically corrected image. The proposed method can be applied in various application areas including vehicle real-view cameras, visual surveillance systems, and medical imaging systems.