• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.437-443
• /
• 2012

In this paper, we propose a novel unambiguous correlation function for binary offset carrier (BOC) signal acquisition. Specifically, we first find out that the side-peaks arise due to the fact that the BOC autocorrelation is the sum of the irregularly shaped BOC sub-correlations, and then, propose an unambiguous correlation function with no side-peak by combining the sub-correlations. The proposed scheme is shown to remove the side-peaks completely for any type of BOC signal and to provide a better acquisition performance than the conventional correlation functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.845-849
• /
• 2013

In this paper, we design local signals to remove side-peaks in the binary offset carrier (BOC) autocorrelation. Specifically, we first investigate why local signals of the conventional schemes are applicable to either sine or cosine-phased BOC signals, and then, design local signals applicable to both sine and cosine-phased BOC signals. Finally, we obtain two partial correlations and propose a correlation function with no side-peak via a combination of the partial correlations. From numerical results, we demonstrate that the designed local signals are applicable to both sine and cosine-phased BOC signals and can remove side-peaks completely.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.961-968
• /
• 2004

In this paper, we present a set of numerical schemes to solve the Muller integral equation for the analysis of electromagnetic scattering from arbitrarily shaped three-dimensional dielectric bodies by applying the method of moments(Mon. The piecewise homogeneous dielectric structure is approximated by planar triangular patches. A set of the RWG(Rao, Wilton, Glisson) functions is used for expansion of the equivalent electric and magnetic current densities and a combination of the RWG function and its orthogonal component is used for testing. Numerical results for a dielectric sphere are presented and compared with solutions obtained using other formulations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.292-292
• /
• 2010

양성자기반공학기술개발단에서는 100MeV와 20MeV의 가속기를 개발하고 있으며 빔 이용을 위하여 각 에너지에 5개의 빔라인을 구축 할 계획이다. 빔라인에는 각 마그넷과 빔 계측, 진공 등의 부품이 포함되어 있다. 본 연구에서는 빔라인의 기초 구성품인 진공 부품의 설계를 위한 압력의 계산을 수행하였다. 각 빔라인 재질에 따른 gas load는 표면의 아웃게싱이 주요하게 고려되었으며 고진공용 Cu gasket의 진공 leak는 거의 없다고 가정하였다. 재질은 스테인레스스틸과 알루미늄의 두 가지 경우를 사용하였으며 주 배기 펌프는 이온펌프로 펌핑 스피드 125L/s의 diode 타입이다. 빔튜브의 사이즈는 CF6"의 규격 플랜지를 기본으로 빔 사이즈가 고려된 여러 플랜지의 조합으로 내부 부피를 구할 수 있었다. 빔라인 뿐만 아니라 타겟룸에 위치되어지는 튜브를 합한 경우와 펌프의 개수를 다르게 하였을 때에도 길이에 따른 압력의 프로파일을 계산하였다. 빔을 분배해 주는 AC 마그넷 이전에 이온펌프 한 개를 위치하였을 때 스테인레스스틸 빔 튜브의 경우에 최대값은 1.3E-6 torr, 최소값은 1.7E-6 torr 으로 계산 되었다. 이 결과는 가속기의 아래쪽 3개의 빔라인을 동시에 배기하고 빔 조사가 가능하도록 운영되는 조건이며 운영 마진 2배를 고려한다고 하여도 최소 진공도는 3.4E-6 torr 이다. 이온펌프는 일반적으로 9.0E-6 torr 이하에서 사용이 가능하므로 이온펌프 1개의 진공도로도 운영에 무리가 없으며 이온펌프의 수가 증가됨에 따라서 최대 도달 압력이 낮아짐을 알 수 있다.

• Journal of Korean Philosophical Society
• /
• v.117
• /
• pp.327-354
• /
• 2011

This study has a key assumption that 'characteristics of discouse can be found in not its inside, but its outside'. The prism through which we can see those characteristics was provided by Foucault and Bakhtin who were introduced in the study. As an effort co probe the outside of discourse, the study is briefed 'the three attributes of discourse' that were suggested by Foucault First, discourse has the principle of selection and exclusion, which is based on power relations. Second, discourse is not transparent at all since it is always offensive towards other discourses and defensive against selected ones Third, discourse which is naturally accepted because of its dailiness had a deep structure secretly hidden in it. Based on the above attributes, Foucault and Bakhtin paid their attention to the outside of discourse. Specifically, they considered discourse fundamentally and went beyond it, and reflected the procedures of discourse. This study focused on 'Socrates', something common in the two scholars' works with discourse. In dealing with discourse, Bakhtin started with 'Socratic dialogue' that is based on the dialogic nature of human thoughts which purse the truth. For Foucault, it was Socrates who had the 'courage to cell the truth' and practiced 'self-consideration'. According to Foucault, the ethics of self-practice originated from the philosopher. The ethics is neither the precise representation of individual life that is withdrawn towards the inner self, nor the skills of happiness. It is just relational and cross-sectional. For a better understanding, this study pointed out that Kafka created a variety of 'dialogic voices' focusing on the outside of discourse. Dialogues found in his writings are 'interminable dialogues' that truly 'communicate with different times and different spaces'. For example, his novel, 'Der Prozess' opens the possibility of discussing in various ways the court which is look beyond conventions and extraordinary. Kafka's novels have a structure that their starting point found at the introduction reappears at the termination, presenting multi-vocal dialogues.

• Investigative Magnetic Resonance Imaging
• /
• v.1 no.1
• /
• pp.142-147
• /
• 1997

Purpose: To compare the effectiveness of the in-phase (IP) sequence and the opposed-phase (Op) sequence in the detection of focal hepatic lesions in the single breath-hold hepatic MR imaging with fast gradient T1-weighted pulse sequences. Materials and Methods: IP and OP T1-weighted breath-hold imaging was performed using fast gradient echo sequences in 45 patients referred for known focal hepatic lesions, in which 78 lesions were detected. Three blind readers independently reviewed the images for lesion detectability. The signal-to-noise ratio (SNR) of the liver, the lesion-to-liver contrast-to-noise ratio (CNR) and the liver-to-spleen CNR were also compared. A consensus was reached by three readers to determine which sequence is better in image quality. Results: On OP images, 61(78%), 61(78%), and 63(89%) lesions were correctly identified for reader 1, 2 and 3, respectively. On IP images, 66(85%), 65(83%), and 65(93%) lesions were detected for each reader, respectively. When two image sets were combined, 71(91 %), 69(88 %), and 76(97%) lesions respectively were detected for each reader. In cases of hepatocellular carcinoma, liver-to-Iesion CNR was greater on the OP images(p (0.05), but in other lesions significant difference was not demonstrated. Liver-to-spleen CNR was higher on OP images(p ( 0.1), but the SNR of the liver was higher on the IP images. Conclusion: Use of both IP and OP imaging can be helpful to avoid erroneous missing of some focal hepatic lesions.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.335-341
• /
• 2018

With the improvement of medical state, patients' expectations for the most advanced medical equipment are increasing. Particularly, Magnetic Resonance Image (MRI) is used as one of the core image diagnosis methods in all clinical area. However, it has been reported that many of patients who go through the examination suffer from anxiety to the severe noise level during the examination. In this study, both the noise reduction evaluation of headsets with sound-blocking materials added to existing sound-absorbing materials and the existence of sound blocking materials as artifacts on the examination image are tested. An MRI test noise is recorded as a speaker by cross-ordination the sound material (sponge) and the sound material (acrylic plate, copper plate, and 3D copper plate) inside the headset made from 3D pring. A quantitative assessment of headsets showed that the average headset value was 81.8 dB. The average dB value of the most soundproof material combination(Copper, acrylic plate, sponge, sponge) headsets on headsets with added charactering material was measured at 70.4 dB, and MRI showed that the copper was diamagnetic substance and excluded. The second most soundproof headset(Sponge, acrylic plate, 3D copper plate, sponge) was measured at 70.6 dB and MRI showed no artifacts. The same simulation of the material printed with a 3D copper PLA containing approximately 40 % copper powder resulted in no artifacts, therefore, the material output as a 3D printing was better suited for use. For MRI related research, the mutual development of 3D printing is highly anticipated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1214-1218
• /
• 2007

댐 하류로 탁수를 선택적으로 배제하기 위해서는 방류 탁수가 하류에 미치는 영향을 정확히 예측할 수 있는 하천 탁도 예측 및 관리시스템 구축이 필요하다. 낙동강과 반변천의 합류부에서의 이차원적인 혼합에 관한 수치해석 결과는 완전혼합을 가정하는 일차원 수질모델링의 초기 입력자료에 사용됨으로써 낙동강 본류 전체구간의 탁도 모의결과의 정확성을 높이는 데 사용될 수 있다. 본 연구는 낙동강의 중상류에 위치한 반변천 합류부에 평면 이차원 비정상 수치모형인 KU-RLMS 모형을 적용하여 탁도 변화 특성을 규명할 목적으로 수행하였다. KU-RLMS 모형은 하천 및 저수지의 국부적인 수리, 수질, 유사이동 해석을 위해 개발된 평면 이차원 비정상 수치모형이다. 직사각형 격자를 사용하는 유한차분법의 단점을 보완하기 위해, 수심적분된 2차원 연속방정식, 운동량방정식, 이송확산방정식을 불규칙한 경계를 현실적으로 모사할 수 있는 직교곡선 좌표계로 변환한 방정식을 사용한다. 이 모형은 흐름, 농도, 지형변화를 조합하여 계산할 수 있는 모형으로서 점착성 및 비점착성 유사의 이동을 모의할 수 있다. 수치모형 적용을 위한 현황분석으로 안동 및 임하 조정지댐의 방류량, 안동 수위관측소의 수위, 법흥교 및 포진교 지점의 탁도 자료를 분석하였다. 이송확산모형의 보정을 위해, 안동대교 지점의 탁도 횡분포 측정 자료를 사용하여 확산계수에 대한 매개변수 추정 및 검증을 수행하였다. 또한, 안동조정지댐과 임하조정지댐의 방류량 및 방류탁도을 고려하여 수치모의조건을 결정하였으며, 각 조건에 대한 탁도 변화 특성을 분석하였다.된 주변국이 될 수밖에 없을 것이다. 21세기 문화산업에서 우리가 판단하게 될 디자인의 가치는 계몽의 원리에 대한 '역사성'과 '현재성'의 변증법에 달려있는 것이며, 새로운 철학, 새로운 문명, 새로운 세계를 열어가는 것이다.r$ (地理志)에는 추현리와 이미 외리를 언급하면서 상주의 자기제작의 위상을 짐작하는 기록이 언급되면서 전국의 상품의 절반을 담당하고 있었음을 알 수 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 상주가 8곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기

• The Korean Journal of Coaching Psychology
• /
• v.7 no.1
• /
• pp.91-116
• /
• 2023

This study aims to investigate the differences in burnout, emotional labor strategies, affect intensity, and emotional clarity based on combinations of level of mindfulness and compassion. To achieve this, a total of 137 mental health professionals participated in this study, and they were classified into four groups based on their level of mindfulness and compassion using cluster analysis. Then, the differences among the groups were compared. The results of the multivariate analysis of covariance(MANCOVA) or multivariate analysis of variance(MANOVA) controlling for career experience, showed that the group with high levels of both mindfulness and compassion had the highest levels of positive affect intensity, emotional clarity for self and others, and genuine expression, while having the lowest levels of negative affect intensity, surface acting, and burnout. In comparison to the group with high levels of both mindfulness and compassion, the group with high or low level of either mindfulness or compassion had both positive and negative affect intensity at higher or lower levels. Additionally, they showed lower emotional clarity for self and others, and genuine expression. Conversely, they showed higher levels of surface acting and burnout. The group with low levels of both mindfulness and compassion experienced low levels of positive affect intensity and high levels of negative affect intensity. They also had the lowest levels of emotional clarity for self and others and genuine expression. In addition, they showed that the highest levels of surface acting, and burnout. Based on the results, the study discussed the balanced development of mindfulness and compassion to prevent burnout of professionals in the human service field, including mental health professionals. The implications and limitations of this study were further analyzed in the discussion section, including the direction for future research.

• Information Systems Review
• /
• v.18 no.4
• /
• pp.69-88
• /
• 2016

Nowadays, organizations have adopted Smart Work to efficiently manage tasks, such as electronic document approval, customer management, and site inspection, without spatial-temporal constraints. Smartphones, which are commonly used in Smart Work, enable individuals to perform their jobs anytime and anywhere, thus blurring the boundary between work and non-work. To solve the problem of blurred work/non-work boundaries, a construct of self-control and affective factors needs to be considered because business style is changed from command to autonomy in the Smart Work context. Moreover, employees can convey their emotions easily over smartphones. Recent marketing studies have analyzed consumers' behavior based on the combination of cognitive, affective, and behavioral components, and researchers of information systems are also interested in these factors. However, previous research has some limitations, such as not classifying factors into cognitive, affective, and behavioral as well as not covering all three factors. Therefore, we explore the roles of cognitive, affective, and behavioral components in emotional exhaustion and education performance, and conduct a survey on undergraduate and graduate students, who are the major users of smartphones. Findings show that when individuals improve their cognitive capability (self-control) and usage experience (smartphone communication and internet usage), they can decrease emotional exhaustion and increase education performance. In the role of affective capability, increasing education performance is partially accepted. These results imply that organizations should not focus on controlling the usage of smartphones but on promoting appropriate smartphone usage.