• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.150-153
• /
• 1994

Magnetic field annealing method has been used to obtain proper hysteresis loop shapes which are useful to a device using amorphous ribbon. In this study, two pairs of Helmhotz coils were used to apply longitudinal and transverse magnetic field during annealing. For the measurement of coercive field strength noise which depends on magnetic field annealing, Co-based amorphous alloy ribbon $VITROVAC^{\circledR}$ 6030 was used. For the sample which was annealed under dc transverse and dc longitudinal magnetic field, coercive field strength noise was nearly independent of magnetizing frequency ranging from 1 to 100 kHz, but dc transverse and ac longitudinal magnetic fields annealed samples show that the coercive field strength noise decreased in power of magnetizing frequency. When magnetic domain nucleation occurred, the coercive field strength noise increased remarkably and decreased in power of magnetizing frequency.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.131.1-131.1
• /
• 2015

플라즈마 진단법으로서 컷오프 탐침과 랑뮤어 탐침은 다양한 분야에서 많은 연구가 진행되었다. 하지만 고밀도 및 균일성 관점에서 많은 이점을 가지고 있는 자화유도결합플라즈마에서 컷오프 탐침의 적용 가능성에 대한 연구는 많이 부족하다. 본 연구에서는 두 가지 탐침법을 이용하여 전자밀도를 비교하고 각각의 특성을 분석하였다. 먼저 랑뮤어 탐침법을 이용하여 RF파워, 압력, 외부자기장에 따른 플라즈마 변수(전자밀도, 전자온도, 플라즈마 전위)를 측정하였다. 외부자기장을 인가하였을 때 전자구속으로 인하여 전 영역의 전자밀도는 증가하였지만 R방향의 전자밀도 분포는 균일하지 않았다. 반면 전자온도는 외부자기장을 인가하였을 때 챔버 중심에서 감소하였으며, 챔버 끝에서 전자온도는 증가하였다. 즉, R방향의 전자온도 분포는 U형태가 나타났다. 또한 컷오프 탐침으로 전자밀도를 측정한 결과 비교적 낮은 $10^{11}/cm^3$ 이하에서 정확한 컷오프 주파수를 확인하여 전자밀도를 구할 수 있었으며, 그 이상의 전자밀도를 갖는 경우 동축케이블의 손상 문제로 인하여 신뢰성 있는 결과를 얻기는 힘들다. 현재 이 문제를 해결하기 위한 연구가 지속적으로 진행 중이다.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.129-129
• /
• 2002

목적： 초상자성 nano 산화철 입자의 특성을 연구하기 위하여, 여러 다른 자기장 세기에서의 NMR 자기공이완시간(T1/T2)을 측정하고, 초상자성 nano-particle 조영제의 기전에 관한 모델로부터 얻어 진 계산식과 비교해보며, 다양한 온도에서의 EPR spectrum을 이용하여 이들의 전자적 성질을 비교해 보고자 하였다.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.105-108
• /
• 2004

Array of magnetic Ni nanostructures has been fabricated on Si substrate by using nanoporous alumina film as a mask during deposition. The nanostructures are truncated cone-shape and the lateral sizes are comparable to height. While the continuous film shows well-defined in-plane magnetization, the nanostructure shows perpendicular component of magnetization at remanence. The hysterectic behavior of nanostructures is dominated by the demagnetizing field instead of interaction among them.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.84-88
• /
• 2015

In this paper, we present that design and implementation of digital extreme-low-frequency (ELF) magnetic meter including wireless monitoring feature. In our lifetime, it is necessary to study how much magnetic field effects to human body. In this paper, we use 3-axis coil-type magnetic sensor, magnetic measurement range is 0.03~10uT and frequency range is 40~180Hz. As magnetic sensor characteristic, frequency loss is occurred that compensated using digital equalize based on DSP processor. Measurement value can be monitored on PC through Wifi communication and measurement error is observed within 6%.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.842_843
• /
• 2009

본 논문에서는 Magnetic Inductance Tomography System(이하 MIDT System)을 이용하여 대상물체의 위치와 밀도 변화 시의 신호해석에 관한 연구를 하였다. MIDT System은 외부에서 자기장을 인가하고, 인가된 자기장에 의해 변화하는 자기장을 홀센서로 검출한다. MIDT System은 시스템이 간단하고 대상물체에 물리적인 손상을 가하지 않고 측정이 가능하다. 본연구에서는 MIDT System을 직접 구성하여 이론적인 해석신호와 실제 실험을 통한 해석신호의 일치여부를 비교 분석하고 MIDT System을 이용하여 대상물체 위치 변화시의 신호 해석할 수 있는 적합성 여부를 판단하였다.

• Journal of the Korean Magnetics Society
• /
• v.20 no.5
• /
• pp.178-181
• /
• 2010

Search coil magnetometer has been used for detection of ac magnetic field with high sensitivity. To reduce demagnetizing factor of core and increase S/N ratio of search coil magnetometer, the core was divided by two parts and coil was wound on each cores. Two coils were connected serially and put into amplifier as differential mode. Constructed 120 mm length search coil magnetometer shows linearity of 0.03%, sensitivity of 9.3 mV/nT, and resolution of 20 pT at 1 Hz.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.179-184
• /
• 1995

The ac magnetic susceptibility of {100} iron whiskers as a function of currents is studied with and without external field. The ac susceptibility depends on the magnitude and the direction of the applied dc current when a small external field is applied along the magnetization of the central domain of the whisker. Variation of the central domain size accounts for the current-dependent response. The measured magnetic responses are explained, using a micromagnetic calculation based on a simple model, as a function of applied currents over a wide range except critical values.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2009

Magnetic bias phenomena of field-annealed CoFeSiB amorphous ribbons showing asymmetric giant magnetoimpedance was investigated by MOKE method. The specimens removed the crystalline layer at one surface side by chemical etching were prepared and measured magnetization curves by MOKE to investigate the effect of the crystalline layer on magnetization of inner soft amorphous phase. We observed the shift of hysteresis loop, and concluded that the crystalline layer exerts bias field effect on inner soft amorphous phase and the direction of bias filed is opposite to the magnetization direction of surface crystalline layer.

• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.178-182
• /
• 2000

We have constructed a rotational loss measuring system which consists of two yoke system for rotational magnetization and 4-channel transient recording system for Hx, Hy, Bx and By measurements. Using the constructed measuring system, we have mesaured rotational energy loss for non-oriented electrical steel sheets. Rotational energy loss was depending on the angle between B-search coil and H-search coil, and the direction of rotation (clockwise and counter clockwise). The average of the rotational energy losses under clockwise and counter clockwise was independent of the angle between B-search coil and H-search coil, and we could improve measuring uncertainty using the averaged rotational energy losses.