• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.194-199
• /
• 1996

평면 배열형 소나 센서에서는 트랜스듀서 상호간의 간섭효과들이 음을 방사하는 각각의 트랜스듀서 및 평면 배열의 빔패턴에 영향을 주게된다. 따라서 음향 방사출력의 계산은 소나용 트랜스듀서의 성능및 효율을 평가하는데 필수적이다. 음향 방사출력을 예측하기 위하여 무한 강성 배플에 고정된 수개의 트랜스듀서를 이론해석의 대상으로 설정하였다. 각 트랜스듀서는 자기방사 임피던스 및 상호방사 임피던스로 구성되어 있으며 이것의 총 방사 임피던스 및 음향반사 출력의 추출은 등가 전기회로 모델을 이용하였다. 이론및 수치해석의 결과에 근거하여 음향방사 출력은 각 트랜스듀서 상호간의 간섭의 양에 의존함을 보였으며 상호간섭에 의한 음향출력 손실은 25.05%에서 최고 51.52%정도임을 확인하였다.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.252-255
• /
• 1998

In this paper, we investigate the magneto-impedance(M1) effect of the FeCoSiB amorphous magnktic films. The amorphous magnetic film having near zero magnetostriction is fabricated by using the sputtering method, and then annealed in magnetic field. When the external magnetic field is directly applied to the fabricated film, the voltage amplitude between both side of the magnetic film varies about 76.2% at 120[MHzl and the impedance varies about 2.1%/0e. Thus, we find that the fabricated magnetic film has the characteristics of good sensor element.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.21-26
• /
• 1998

The temperature dependence of the magnetoimpedance (MI) effect is important both for scientific study and for thermal stability of MI sensor. We have performed the measurement of MI effect in amorphous $Co_{66}Fe_1Ni_1B_{14}Si_{15}$ (Metglas 2714 A) ribbon from a cryogenic chamber where the temperature of the sample can vary from 10 K to 300 K. The ac current was fixed at 10 mA for all measured frequencies ranging from 100 KHz to 10 MHz. The magnetoimpedance ratio (MIR) was revealed the drastic increment as a function of MIR (T) = MIR (0) exp(cT$^2$) where c is a constant. The measured MIR values at room temperature are usually 2-3 times larger than the data measured at 10 K for all measured frequencies. However, the shapes of the MIR curves are remained. This result shows the potential application of the MI effect for a temperature sensor. The frequency dependence of MIR has shown the typical tendency where the maximum values of MIR are increasing ans also the shapes of MIR curves are getting broader as the measured frequency increases.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.38-38
• /
• 1997

In the paper, we investigate the magneto-impedance(MI) effect of the Fe-Co-B Amorphous magnetic film, the amorphous magnetic film having near zero magnetostostriction is fabricated by using the sputtering methode, and then annealed in magnetic field. When the external magnetic field is directly applied to the fabricated film, the voltage amplitude between both side of the magnetic film varies about 22% at 10[MHz] and the impedance varies about 21% at 10[Oe]. Thus, we find that the fabricated magnetic film has the characteristics of high-quality sensor element.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.55-59
• /
• 2007

Co-based amorphous magnetic wire with a diameter of $125{\mu}m$ and a length of 40 mm was used as an inner conductor of a coaxial cable to construct a magnetic sensor. Sensor characteristics was measured up to 3 GHz with applied up to 60 Oe by using network analyzer. Frequency dependence of impedance for this sensor was very close to the impedance resonant pattern of transmission line and 250 MHz was obtained as a 1/4 wavelength without external magnetic field. Large impedance change was measured in the magnetic field range between 0 Oe and 1 Oe, which was influenced by permeability change of magnetic amorphous wire. Because ${\Delta}Z/{\Delta}H$ value of $300{\Omega}/Oe$ was obtained at 0.1 Oe, this coaxial cable with amorphous wire can be useful as a magnetic sensor.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.47-56
• /
• 2021

Steel plates coated by self-healable polymer still can be rusted since it takes time to be healed. In this study, dual self-healing coating material is developed using corrosion inhibitor (DTBEDA) which can form hindered urea (HUB) as reversible cross-linking bond at the same time. Developed dual self-healing polymer is coated on steel plate, and scratch healing property was investigated by surgical blades and nano/micro indentation tester. The anticorrosion effect of DTBEDA was investigated by electrochemical impedance spectroscopy (EIS).

• Journal of the Korean Magnetics Society
• /
• v.7 no.3
• /
• pp.134-139
• /
• 1997

Magneto-impedence (MI) were measured in amorphous $Co_{66}Fe_4NiB_{14} Si_{15}$ ribbons at 100 kHz as a function of the angle from ribbon axis. The samples were prepared using etching method, with the angle deviated from ribbon axis, 0$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$. The MI measured in 60$^{\circ}$ sample increased with the increasing magnetic fields. The dip in profile appears at H = 0 above the angle of 30$^{\circ}$. The maximum values of MI and their dips are increased with the cutting angle, but the maximum value of MI decreased at 90$^{\circ}$. The increase of MI with the angle was analyzed in terms of the transverse magnetic permeability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.67-73
• /
• 2009

The magnetic saliency effect in surface-mounted permanent-magnet (SMPM) motors on the torque control at high speeds is first presented and analyzed in this paper. The d- and q- axes impedance are measured by proposed State-Filter. Measurement of the d- and q- axes impedance difference is performed to prove the existence of the magnetic saliency. Then, the saliency effects on the torque control performance in the flux weakening region are discussed. Based on the developed motor modeling with the reluctance torque, the proposed control adjusts the d- and q-axis current toward the operating point to track the commanded torque. The feasibility of the presented idea is verified by experimental results on a commercial 600[W] SMPM motor.

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.198-203
• /
• 2003

To investigate whether the use of hard magnetic film is available to generate bias magnetic field for a magnetoimpedance sensor, the magnetic properties of SmCo hard magnetic films were investigated as a function of their compositions. The saturation magnetization decreased with Sm content increasing in SmCo films. And, the coercive force increased in the extent of Sm content of 28 at%, but decreased as Sm content increased moreover. The bias field effect of SmCo film to amorphous CoZrNb film was investigated with the magnetization corves, permeabilities, and magnetic domain structures of SmCo/CoZrNb multilayers. The bias field of about 60 Oe was observed in the film with 3 mm ${\times}$ 0.5 mm, which can be constructed as a MI sensor, and this result strongly indicates that the bias field generated from a hard magnetic film is adequate to enhance the sensitivity of a MI sensor with hard/soft magnetic multilayer structure.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.250-255
• /
• 2000

Double rectangular spiral thin-film inductors were fabricated using $Fe_{86.7}Zr_{3.3}B_{4}Ag_{6}$ thin film with high permeability and resistance, in which easy axis of magnetization of the thin-film was perpendicular or parallel to the current direction. The perpendicular geometry inductor revealed higher inductance than the parallel geometry one, because spin aligns of magnetic film were more easily along the field direction due to higher field intensity in the perpendicular geometry. The increase of the inductance, however, resulted in the decrease of resonance frequency. The permeability was monitored by annealing the thin-films at different temperatures. With increasing the permeability, the inductance increased, but total resistance also increased due to the increase in magnetic core loss. As the resonance frequency was higher in air-core inductor than in magnetic thin-film core inductor, it is suggested to increase the resonance frequency that the characteristic of air-core inductor rather than the magnetic properties of the thin-film should be enhanced..