• Investigative Magnetic Resonance Imaging
• /
• v.6 no.2
• /
• pp.120-128
• /
• 2002

Purpose : To demonstrate that the relaxographic method provides additional information such as the distribution of relaxation times and water content which are poentially applicable to clinical medicine. Materials and Methods : First, the computer simulation was performed with the generated relaxation data to verify the accuracy and reliabilility of the relaxographic method (CONTINI). Secondly, in or der to see how well the CONTIN quantifies and resolves the two different ${T_1}$ environments, we calculated the oil to water peak area ratios and identified peak positions of ${T_1}-distribution$ curve of the phantom solutions, which consist of four centrifugal tubes (10 ml) filled with the compounds of 0, 10, 20, 30% of corn oil and distilled water, using CONTIN. Finally, inversion recovery MR images for a volunteer are acquired for each TI ranged from 40 to 1160 msec with TR/TE=2200/20 msec. From the 3 different ROIs (GM, WM, CSF), CONTIN analysis was performed to obtain the ${T_1}$-distribution curves, which gave peak positions and peak area of each ROI location. Results : The simulation result shows that the errors of peak positions were less in the higher peak (centered ${T_1}=600$ msec) than in the lower peak (centered ${T_1}=150$ msec) for all SNR but the errors of peak areas were larger in the higher peak than in the lower peak. The CONTIN analysis of the measured relaxation data of phantoms revealed two peaks between 20 and 60 msec and between 500 and 700 msec. The analysis gives the peak area ratio as oil 10%: oil 20%: oil 30% = 1:1.3:1.9, which is different from the exact ratio, 1:2:3. For human brain, in ROI 3 (CSF), only one component of -distributions was observed whereas in ROI 1(GM) and in ROI 2 (WM) we observed two components of ${T_1}-distribution$. For the WM and CSF there was great agreement between the observed ${T_1}-relaxation$ times and the reported values. Conclusion : we demonstrated that the relaxographic method provided additional information such as the distribution of relaxation times and water content, which were not available in the routine relaxometry and ${T_1}/{T_2}$ mapping techniques. In addition, these additional information provided by relaxographic analysis may have clinical importance.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2014

$Co_2Z$-type barium ferrites ($Ba_3Co_2Fe_{24}O_{41}$) were synthesized using variation method. First, M-type, $Co_2Y$-type and $Co_2Z$-type synthesized by hydrothermal method. Second, M- and Y-type precursors for synthesis of $Co_2Z$ hexaferrite by hydrothermal and ball milling method. the morphology, structure and magnetic properties of the barium ferrite particles were characterized using XRD, FESEM, VSM, impedance. As a result, Single phase of M-type and $Co_2Y$-type were obtained. Manufactured powders of M+Y ball milling, M+Y hydrothermal were similar to single phase of $Co_2Z$-type hexaferrite, all powders were obtained theoretical magnetization (50 emu/g). The largest initial permeability were obtained $Co_2Z$ hexaferrite synthesized by reagent precusor, With increasing calcination temperature was lowered the initial permeability. In another synthesis didn't almost that little change could be found.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.139-142
• /
• 2000

We present results based on FLAPW local spin density(LSD) calculations of double perovskite structure oxide L $a_2$MnFe $O_{6}$ . The total energy calculations with various spin structures show that this material has a stable ferromagnetic spin configuration. The ionic state of transition metals depend on the spin configuration $_Mn^{4+}$ and F $e^{2+}$ for ferromagnetic structure, M $n^{3+}$ and F $e^{3+}$ for ferrimagnetic structure). It is explained by super exchange interaction between transition metals. The calculated magnetic structure is well matched with recent experimental result.ult.t.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.140-144
• /
• 1992

Magnetization of permanent magnet in the strong magnetic field is changeable. So the change of magnetization must be considered for the accurate analysis of the system with permanent magnets. But the hysteresis characteristice of permanent magnet cannot be represented in simple mathematical form. In this paper, Preisach model combined with finite element method which can describe the hysteresis phenomena is applied to analyze the permanent magnet system. To validate the method, it is applied to the force calculations between two magnets with different coercivities and the numerical results are compared with measured data.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.60-65
• /
• 2014

We obtained resonance field ($H_{res}$) and linewidth (${\Delta}H_{PP}$) from measured ferromagnetic resonance signal in the functions of polar angle (${\Theta}_H$) in Ni thin film of 240 nm thickness fabricated by electrodeposition method. The angular dependence of $H_{res}$ was well fitted with the calculated ones. We confirmed that the g-factor and effective demagnetization field were 2.18 and 445 emu/cc by the theoretical analysis of the resonance field, respectively. The angular dependence of ${\Delta}H_{PP}$ showed very large values at in-plane direction (${\Theta}_H=90^{\circ}$), which could not explained by the homogenous linewidth due to the Gilbert damping and inhomogeneous linewidth due to the angular variations and magnetization variations by the surface layer. Therefore, we considered the spin wave scattering (two magnon scattering) process in order to analyze the measured inhomogeneous linewidth, which was appeared in thicker film than the critical thickness of 50 nm. The defect medicated spin wave scattering played a key role in the electrodoposited Ni thin film of 240 nm thickness.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.179-183
• /
• 2002

Fe-Si-C alloy system has been made by mechancial alloying process. The structural and magnetic properties were analysed as a function of processing times. The structural properties were investigated by X-ray diffraction and EXAFS experiments. The magnetic properties were measured by vibrating sample magnetometer and M ssbauer spectroscopy. As processing time increases, Si and C atoms diffuse into a ${\alpha}$-Fe structure and then bcc solid solution is formed after 12 hours of the processing time. The magnetization and the hyper fine field decreased steeply up to 4 hours and then it changed slowly. After 12 hours of the processing time, it almost saturated. These results were agreed with the structural variation.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.7-12
• /
• 1999

A new high-resolution rnagnetotelluric (MT) survey was conducted for pull-apart basin analysis (Cretaceous Eumsung Basin), combined with surface sedimentological results. Two cross-basinal MT profiles represent an asymmetric form with a subbasin in the southeastern part. These basinal architectures are well compatible with paleoflow directions and facies transitions of surface sedimentology. The results also suggest that the basin fills reflect pull-apart opening with rapid subsidence of the central blocks. Combined with the surface sedimentological data on asymmetric lithofacies distribution, facies transitions, and paleoflow directions of the alluvio-lacustrine systems, the MT data help explain basin-fill processes during the basin formation. For petroleum exploration and basin analysis, the high-frequency MT technique can be a useful substitute for the costly burden of a seismic-reflection survey on land.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.145-145
• /
• 1999

La-Ca-Mn-O (LCMO) 박막에서 초거대 자기 저항 효과와 발견된 이후 자기 센서와 고밀도 자기 저장 매체로서 응용하기 위한 연구가 진행되고 있다. 그러나 현재 대부분의 증착은 타겟과 박막간의 조성의 일치를 위하여 PLD 방법을 이용하고 있으며 RF magnetron sputtering 법으로 증착한 예는 많이 보고되고 있지 않으며 특히 적층 성장시킨 예는 아직 보고되지 있지 않다. 또한 LCMO와의 낮은 격자 상수 불일치를 보이는 SrTiO3와 LaAlO3 기판에 LCMO 박막을 성장시킬 경우 LaAlO3의 경우 XRD rocking curve의 curve의 FWHM 값이 SrTiO3 상에 증착시킨 것의 10배 이상의 값을 보인다는 것은 주목할 만한 사실이다. RF magnetron sputtering 법을 이용하여 LaAlO3 기판상에 145nm MCMO 박막을 적층성장시켰다. XRD $ heta$-2$\theta$ scan을 통해 박막이 c-축 배향한 것을 확인할 수 있었으며 RBS 분석결과 4.98%의 minimumyield를 보였으며 이로부터 박막이 적층성장한 것을 확인할 수 있었다. LCMO (200) peak의 XRD $\theta$-rocking 결과 FWHM의 값은 0.311$^{\circ}$를 보였으나 2개의 피크가 존재하는 것을 볼 수 있었다. 따라서 기판의 (200) 피크를 XRD $\theta$-2$\theta$ scan에서 0.3$^{\circ}$ 간격으로 두 개의 피크를 관찰할 수 있었는데 이는 기판과 박막간의 stress로 인한 tetragonal distortion에 의한 것으로 알려져 있었다. 따라서 기판상에 박막이 어떤 식으로 적층 성장되었는지를 RBS를 이용하여 <001>과 <011> 방향으로 2MeV He++를 주입하여 0.1$^{\circ}$ 간격으로 틸팅을 해본 결과 <001> 방향에서는 1.12$^{\circ}$의 차이를 보였다. 이는 기판과의 compressive stress로 인해 c축 방향으로 늘어났으며 stress relaxed layer는 XRD 결과와는 달리 관찰할 수 없었다. 이러한 현상의 기판 자체의 twin 구조로 인한 것으로 생각된다. RBS 분석후 고분해능 XRD를 이용해 LCMO (200) peak의 $\theta$-rocking 결과 이제R지 laAlO3 상 증착한 LCMO의 값으로는 제일 작은 0.147$^{\circ}$를 나타내었다.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.291-300
• /
• 2011

Archaeomagnetic dating method is used to assign a date to the archaeological remains in which burnt soil is found by measuring the changes in terrestrial magnetism with the thermal remanent magnetization retained in burnt soil. This method, in particular, is quite useful to determine an age of the archaeological remains in which no properties are found, which makes it difficult to assigning a date. Hemp kiln and lime kiln fall under remains of these features, and 21 and 5 archaeomagnetic data from both kilns respectively were obtained by measuring the- remanent magnetization in burnt soil samples that are extracted in hemp kilns and lime kilns in the country. The results of archaeomagnetic dating with these data show the age range of the hemp kilns is between the late 10th century A.D. and the middle of the 19th century, and that of the lime kilns is between the early 16th century A.D. and the middle of the 18th century. The factor that the number of data collected from the hemp kilns was comparatively more than those from the lime kilns might affect the result, however corresponding to the fact that hemp had been used for a long period of time, the period of hemp kiln are widely spread over the chronological table. And the archaeomagnetic dating of lime kiln, in view of archaeological periods, is not only in accord with the late Joseon period when the tombs with lime-soil mixture barrier in trend; this is also telling that its width of archaeological period is comparatively narrow.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.48-55
• /
• 1993

We report the photoemission (PES) studies for the Co/Pd multilayter. The Co 3d PES spectrum of Co/Pd exhibits two interesting features, one near the Fermi energy, $E_{F}$, and another at ~2.5 eV below $E_{F}$. The Co 3d peak near $E_{F}$ of Co/Pd is much narrower than that of the bulk Co, consistent with the enhanced Co magnetic moment in Co/Pd compared to that in the bulk Co. The Co 3d feature at ~-2.5 eV resembles the Pd valence band structures, which suggests a substantial hybridization between the Co and Pd sublayers. The Co 3d PES spectrum of Co/Pd is compared with the existing band structures, obtained using the local spin density functional calculations. A reasonable agreement is found concerning the bandwidth of the occupied part of the Co 3d band, whereas a narrow Co 3d peak near $E_{F}$ seems not to be described by the band structure calculations.