• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.43-47
• /
• 1995

The ball screw is one of the important mechanical parts for the linear motion feeding systems. The usage of the ball screw has been growing in various industrial fields such as CNC machine tool, industrial robot and automated systems. Because of ever increasing demand for ball screws, increased accuracy and quality of the ball screw is needed,especially the surface roughness of the ball contact area in order to diminish noise and vibration. Therefore to improve the surface roughness of the area,we introduced magnetic assisted polishing which is one of the new potential polishing methods. In this study, diamond slurry and iron powder was used for magnetic assisted polishing of the ball bearing surface. This polishing process was experimentally confirmed to improve the surface roughness of the ball bearing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.899-904
• /
• 2011

This This study aims to verify burr formation and to remove the burrs in micro-channel fabrication using micro-machining tools. The machining processes are combined with micro-milling and magnetic abrasive deburring for AISI316 stainless steel. Depending on the micro-milling conditions that are applied, burrs are formed around the side walls. Magnetic abrasive deburring is used to remove these burrs. AISI316 stainless steel is a nonferrous material and its magnetic flux density, which is an important parameter for efficient magnetic abrasive deburring, is low. To enhance this magnetic flux density, we design and build a magnetic array table. The effect of removing burrs is evaluated via SEM and a surface tester.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.270-279
• /
• 2003

현대산업의 고도화 추세에 따라 반도체를 비롯한 의료 및 식품위생기기 산업분야에 사용되는 부품의 고정도가 요구되면서 기존에 공구와 가공물이 직접 접촉하면서 절삭하는 가공방법으로는 절삭력에 의한 변형과 마찰열 등으로 인하여 고정도 가공의 실현에 어려움이 생기게 되었다. 그리고 의료 및 식품기기에 사용될 부품의 내면을 기존의 기계적 가공방법으로 가공할 경우 공작물 표면에 미소한 가공흔적이 남게되어 표면의 요철부분에 칩(chip)등의 불순물이 잔재할 우려가 있으며, 또한 요철 부분에 미생물이 번식할 경우 청정도가 떨어져 산업위생상의 문제점이 발생하게된다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.197-198
• /
• 2007

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.59-65
• /
• 1996

There are many difficulties in automatic polishing for die & mold surfaces. Even though the process has been studied in the past 15 years, it has not been achieved yet, but by the process of actual hand work of well-skilled workers. A new magentic assisted polishing process, which is one of the potential methods for automation of surface finishing has been studied in the past 10 years by colleagues. The process has many merits, but on the other hand also has demerits, one being low efficiency of grindability by comparision with wheel polish. Therefore, some attempts were tried to improve the grindability by adopting electropolishing, ultra-high speed milling, 5-axis controlled machine etc... most recently by colleagues. This paper also aims to improve the efficiency of polishing by introducing the easily-polished shape surface cutting method equalizing the tool feed per revolution to the pick feed. This cutting method was experimentally confirmed to have sufficient grindability to polish milled surface (with $10{{\mu}m}$Rmax surface roughness) into mirror surface (with $0.4{{\mu}m}$Rmax surface roughness).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.113-120
• /
• 1991

근년, 정밀가공기술의 진보에 따라 AI 합금이나 동등의 연질금속을 이용한 고출력 Laser용 Mirror, 전자계산용 자기Disc기반, Laser Printer용 PloygonMirror등의 Opto-electronics 부품이 경면(Mirror Surface)절삭가공에 의해서, 또 LSI용 Silicon Wafer의 가공은 연마가공에 의해서 nmRmax의 표면조도로 마무리 가공되고 있다. 본 연구에서는 고출력 Laser용 Mirror, 자기Disc기반, Silicon Wafer와 같은 경면(표면 조도 submicron이하)에 존재하는 미소표면결함을 정량적이며, 고속측정이 가능한 방법인 새로운 측정법을 제안하고, 이 시스템을 생산라인에서 가공과 동시에 검사하는 In-process측정이 가능한 특정 시스템의 개발을 최종목표로 하고 있다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.1
• /
• pp.38-44
• /
• 2004

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of non-ferromagnetic pipe. In this paper, an abrasive slurry circulation system was designed and manufactured. As a result, it was found that a fine inner surface of pipe was available by the use of these machining methods. The basic machining characteristics of pin-type magnetic tools were analyzed experimentally. In addition, the experimental results show that pin-type magnetic tools have more machining efficiency than Iron particles as magnetic tools.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.1
• /
• pp.7-12
• /
• 2005

An internal finishing process by the application of magnetic abrasive finishing has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, another method of magnetic abrasive machining in which the N and S magnetic poles are vibrated and a workpiece is rotated only is tried in a non-ferromagnetic pipe(SUS304), and its finishing characteristics is experimently investigated by various effective factors such as vibrating frequency and amplitude. From the experimental results, it is found that the vibration effects of magnetic poles on the finishing characteristics are large in internal finishing.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.12
• /
• pp.1253-1258
• /
• 2013

Ceramic particles as polishing abrasives are often used in a magnetic abrasive polishing process because they have strong wear resistance. Non-ferromagnetic ceramic abrasives should be mixed with ferromagnetic iron particles for controlling the mixture within a magnetic brush during the polishing process. This study describes the application of the ceramic particles for the magnetic abrasive polishing. The distribution of the magnetic abrasives attached on a tool varies with magnetic flux density and tool rotational speed. From the correlation between abrasive adhesion ratio in the tool and surface roughness produced on a workpiece, practical polishing conditions can be determined. A step-over for polishing a large sized workpiece is able to be selected by a S curve, and an ultrasonic vibration assisted MAP produces a better surface roughness and increases a polishing efficiency.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.35-41
• /
• 2008

R/In order to satisfy the customer's variant needs for a product quality in recent years, a demand for developing higher precision machining technologies in a lot of application areas such as automobile, cellular phone and semiconductor has been increased more and more. Magnetic abrasive polishing(MAP) process is one of these precision technologies. In this study, to verify the parameters' effect of the MAP process on the surface roughness improvement of the plane and the inclined workpiece, well planned experiments which was called the design of experiments were carried out. Considered polishing factors were spindle speed, supplied current, abrasive type and working gap between the workpiece and the solid tool. As a result, it was seen that the supplied current and the working gap greatly affected the surface roughness improvement.