• Journal of the Korean institute of surface engineering
• /
• v.31 no.3
• /
• pp.151-156
• /
• 1998

코발트계 비정질 합금을 여러 온도 구간 및 시간에 대해서 열처리하며 표면 결정화 현상이 자기 이방성에 미치는 영향을 탐구하였다. 자기 이방성은 비정질 표면의 결정 구조에 민감한 변화를 보였는데 면심입방점 코발트에 많은 결함이 존재할 경우 자기이방성이 최대치를 나타내였다.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.25-29
• /
• 2005

Magnetic properties of YIG films grown by solid phase epitaxy (SPE) was measured as a function of temperature with focus on magneto-crystalline and perpendicular magnetic anisotropy. Perpendicular magnetic anisotropy was not induced in the SPE YIG films annealed at low temperature by relaxing residual stress through formation of dislocation. On the contrary the films annealed at high temperature showed perpendicular magnetic anisotropy which shows very low density of dislocation. Perpendicular magnetic anisotropy field decreased linearly up to a high temperature of $230^{\circ}C$ above which magneto-crystalline anisotropy disappeared. Coercivity also decreased linearly with temperature up 세 $230^{\circ}C$. Magneto-crystalline anisotropy of perpendicular anisotropy induced epitaxial (111) YIG films can be measured using $H_k=4K_1/3M_s$. Temperature behavior of initial susceptibility can be successfully explained by Hopkinson effects. Curie temperature of YIG films grown on GGG substrate with high paramagnetic susceptibility can be easily measured using the results.

• 전기의세계
• /
• v.42 no.9
• /
• pp.20-27
• /
• 1993

1. 철근출막은 결정자기이방성의 영향이 작기 때문에, 자기특성이 막의 기하학적구조에 의해 거의 결정되고 그것에 의하여 자성막의 설계가 가능하다. 2. 코발트 근출막은 결정자기이방성이 자기특성에 영향은 크기때문에 코발트 결정의 자화용역축(C축)의 배향에 의하여 자기특성은 크게 변한다. 따라서 이 C축의 배향성을 변화시켜 석출입자의 형태를 바꾸지 않고 작은 포아직경에서도 항자력의 제어가 가능하였다. 3. 코발트-철합금신출막은 조성변화에 의하여 자기특성을 제어할 수 있다. 또 ㅈ포화자화, 항자력도 철을 석출한 자성막에 비해서 높은 값을 나타냄을 물론, 우수한 각형화(Mr/Ms)로 얻어지는 큰 자기에너지적으로 수직 자기기록방식의 고정밀의 로타리 엔코다에의 응용이 유망하다.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.10-14
• /
• 2011

We have measured the ferromagnetic resonance (FMR) signal in as deposited and $400^{\circ}C$ annealed CoFeB/MgO thin film to investigate the annealing effect on magnetic anisotropies and FMR linewidth (${\Delta}H_{PP}$). The uniaxial anisotropy field ($H_{K1}$) was only observed in the as deposited sample. Whereas, in the $400^{\circ}C$ annealed sample, the biaxial anisotropy field ($H_{K2}$) was additionally observed in accompany with uniaxial anisotropy field ($H_{K1}$). The appearance of biaxial anisotropy fields was originated from the crystalline growth of bcc CoFeB(001) from the MgO(001) interface and by the B diffusion during thermal annealing. Also, the ${\Delta}H_{PP}$ of $400^{\circ}C$ annealed sample was increased compared with that of as deposited sample, which was due to the broad distribution of the magnetization axis by the biaxial anisotropy.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.324-334
• /
• 1995

앞의 논문에서 살펴 본바와 같이 밀도 범함수 이론에 바탕을 둔 제일 원리적 에너지 띠 계산 방법의 하나인 FLAPW(Full-potential Linearized Augmented Plane Wave) 방법 에 의해 표면, 계면, 초격자에서의 전자 구조및 자기적 성질, 그리고 구조적 성질이 잘 설명될수 있음을 보았다. 이러한 성공적 결과에도 불구하고 전자구조 계산 방법은 풀어야할 새로운 문제에 직면하고 있는데 그 중 중요한 것은 스핀-궤도 결합(spin-orbit coupling : SOC)을 어떻게 취급하며, 그 결과로 나타나는 자기 결정 이방성( magnetocrystallinge anisotropy : MCA)과 강자성 금속에서 나타나는 광자기적 효과를 설명하는 것이다.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.173-176
• /
• 1999

Errors of saturation magnetization and magnetocrystalline anisotropy constant determined by magnetization curve of magnetically aligned unixial power were analyzed. In case of alignment factor ${\Theta}_0=10{\circ}$, magnetic constant errors of $Nd_2Fe_{14}B$ were calculated to be error of $M_S{\risingdotseq}1{\%}\;and\;error\;of\;K_1{\risingdotseq}13\;{\%}$, respectively, and magnetic constant errors of Ba-ferrite were calculated to be error of $M_S{\risingdotseq}1{\%}\;and\;error\;of\;K_1{\risingdotseq}17\;{\%}$. In this method, $M_s$ was found to be determined with high accuracy. High alignment is desirable for high accuracy.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1996.10a
• /
• pp.92-93
• /
• 1996

• Journal of the Korean Magnetics Society
• /
• v.25 no.4
• /
• pp.101-105
• /
• 2015

Recent theoretical calculations predicted that a system composed exclusively of 3d transition metals without 4d/5d transition metals or rare earth metals can have strong perpendicular magnetocrystalline anisotropy (MCA) if Fe and Ni layers are arranged appropriately. They considered only Fe-terminated surfaces, noting that Fe/MgO(001) and CoFeB/MgO(001) show strong perpendicular MCA. In this paper, we investigate magnetism and MCA of Ni/Fe(001) surface where Ni layer is positioned at the surface, by using complementarily the first principles calculational methods of Vienna Ab-initio Simulation Package (VASP) and Full-potential Linearized Augmented Plane Wave (FLAPW) method. Comparing results of magnetism and MCA obtained by VASP with the results by FLAPW method, we find the VASP results do not show big difference from results by FLAPW method. Magnetic moments of Fe and Ni are enhanced due to strong hybridization between Fe and Ni bands. MCA of Ni/Fe(001) is parallel to the surface, which implies the surface termination plays a crucial role in determining MCA of a system.

• Journal of the Korean Magnetics Society
• /
• v.12 no.1
• /
• pp.14-19
• /
• 2002

The iron-doped perovskite La$_{0.67}$Sr$_{0.33}$Mn$_{0.99}$$^{57}$Fe$_{0.01}$O$_3$compound has been studied by x-ray diffraction, Mossbauer spectroscopy, and vibrating sample magnetometry. The single phase of the polycrystalline La$_{0.67}$Sr$_{0.33}$Mn$_{0.99}$$^{57}$Fe$_{0.01}$O$_3$powder has been prepared by a waterbased solgel method. Crystalline La$_{0.67}$Sr$_{0.33}$Mn$_{0.99}$$^{57}$Fe$_{0.01}$O$_3$was a rombohedral structure with lattice parameters a$_{0}$=5.480 $AA$, $alpha$=60.259$^{circ}$. Mossbauer spectra of La$_{0.67}$Sr$_{0.3}$/Mn$_{0.99}$$^{57}$Fe$_{0.01}$O$_3$have been taken at various temperatures ranging from 20 to 400 K. As the temperature increases toward the Curie temperature, T$_{c}$=375 K, the Mossbauer spectra show line broadening and the difference between the 1,6 and 3,4 linewidths is caused by the anisotropic hyperfine field fluctuation. The anisotropic field fluctuation of +H (P$_{+}$=0.80) is greater than -H (P$_{-}$=0.20). We calculated that the anisotropy energy was 124.01 erg/cm$^3$for T=150 K which is associated with the large line broadening.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.14-15
• /
• 1998