• Journal of Nutrition and Health
• /
• v.44 no.3
• /
• pp.231-242
• /
• 2011

The objective of this study was to investigate the effects of nutrition education based on ubiquitous healthcare (u-health) service on changes in dietary habits, nutrition intake, and risk factors for metabolic syndrome in male workers. In total, 72 male office workers with at least three risk factors of the National Cholesterol Education Program-Adult Treatment Panel III were recruited as subjects. Anthropometric measurements and biochemical analyses were conducted on all subjects. Dietary habits and nutrient intake were determined by a questionnaire using the 24-hour dietary recall method before and after nutrition education. Subjects measured their body composition, blood pressure, and physical activity more than once per week during the 12 weeks using the u-health care equipment and sent these data to a central database system using a personal computer. Individual nutrition counseling was provided four times on the first, fourth, eight, and twelfth weeks. The results showed significant decreases in abdominal circumference, body fat (%), diastolic blood pressure, serum triglycerides, and serum total cholesterol during the 12 weeks. Subjects with more than 12 measurements showed significant reductions in abdominal circumference, body fat (%), serum triglyceride, and serum total cholesterol. Mean intake of dietary fiber, animal calcium, potassium, vitamin C, and folic acid after nutrition education were higher than those before nutrition education. Participants showed significant increases in the frequencies of consuming protein foods (meat, fish, eggs, beans, tofu, etc.) and vegetables. In conclusion, nutrition education through the u-health service resulted in positive effects on the risk factors for metabolic syndrome, nutrient intake, and dietary habits.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.273-286
• /
• 1995

The purpose of this study was to compare the difference of the growth aspects in three facial growth patterns. The biennial serial cephalometric radiographs of 33 samples(19males, 14females) with normal occlusion from 8.5 years to 18.5 yews of age were used in this study. The facial growth patterrn was categorized in 3 types(Drop type, Neutral type, Forward type) by the total amounts of the Y-axis which changed from 8.5 years to 18.5 years of age. The growth change of the craniofacial area during 10 years in each growth type was analyzed and was compared among the 3 growth types. The results of this study might be summarized as follows. 1. The samples that were classified by total change of the Y-axis during this study period were distributed to 52% of the neutral type, 27% of the forward type, 21% of the drop type. 2. The anterior growth of the maxilla to the cranial base(N per A) showed larger in the forward type than in other 2 types(p<0.05). 3. The palatal plane to the FH plane showed more anterior-superior inclination in the forward type with age during this study period. 4. The anterior growth of the mandible to the cranial base(N per Pog) appeared large in rank order, of largest the forward type, second the neutral type, and third the drop type(p<0.05). 5. During this study period the mandibular plane(SN/MN,FMA) showed more counterclockwise rotation in the forward type than in the drop type(p<0.05), and this tendency was stronger in males than in females(p<0.05). 6. The growth of the mandibular corpus length(Go-Me) showed smaller in the drop type than in the other 2 types(p<0.05). 7. In the forward type and the neutral type, the anterior growth of the mandible was larger than that of the maxilla(p<0.05). 8. In the craniofacial growth distances and angulations turned out to be somewhat variable, but the vertical proportion had a strong tendency whose original relation was maintained consistently during this study period. 9. Through these analyzed data, the profilograms on each growth type were constructed to evaluate individual growth pattern in the orthodontic diagnosis.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.3
• /
• pp.364-370
• /
• 1994

The purpose of this study is to evaluate the clinical application of the no carrier added $[^{51}Cr]Cr(III)$-EDTA complexes, produced at Korea Cancer Center Hospital. The $[^{51}Cr]Cr(III)$-EDTA complexes, usefut for measurement of GFR were prepared at room temperature in the presence of bicarbonate catalysts. The radiochemical purity of $[^{51}Cr]Cr(III)$-EDTA was over 99% by paper electrophoresis. The time activity curves were obtained by counting the blood samples from 5 volunteers and counting the head and neck regions with whole body counter after injection of the $^{51}Cr$-EDTA, respectively. After the nonlinear regression, the area under curve was obtained. The plasma clearance of the $^{51}Cr$-EDTA was calculated with injected dose/AUC. The clearance rate calculated with the head and neck counting data was in good agreement with the result from the plasma sample radioactivity at 1-3 hrs after injection. From this result, the counting of head and neck region and the nonlinear regression by 2-compartment model could be applied for the measurement of the clearance rate. Using MIRD system, the absorbed radiation dose was calculated by residence $time{\times}S$. The absorbed whole body radiation dose was negligibly small.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.

• The korean journal of orthodontics
• /
• v.41 no.5
• /
• pp.312-323
• /
• 2011

Objective: This study compared the bone thickness of the palate between lateral cephalogram and 3D model measurements. Methods: The subjects consisted of 30 adults (15 men,15 women) with a normal skeletal pattern and occlusion. The CT images were transformed to a 3D model, and were compared with the cephalometric image. Descriptive statistics for each variable were calculated. Results: In the 3D CT model, the mid-palatal area was the thickest part. It became thinner as the palate tapered laterally. In the male group, the thinnest portion was positioned 6 mm away from the mid-palate, while in the female group the thinnest portion was 8mm away from the mid-palate. Correlation analysis between the lateral cephalometric and 3D CT model revealed a significant correlation except in the mid palatal area and the area 2 mm lateral to the mid-palate in men, whereas there was a significant relationship in every area in the women. In both men and women, the highest correlation appeared in the area 8 mm lateral to the mid palate. Conclusions: Using regression analysis, an actual prediction of the bone thickness between the measured bone thickness of the lateral cephalometric radiograph and 3D model was made. This will provide useful information for mini-implant length selection when inserting into the palate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.12
• /
• pp.1599-1608
• /
• 2008

This study aimed to assess the health status based on the anthropometric and biochemical measurements of middle-aged and elderly people living in Andong area. The subjects were 1,384 people (532 males, 852 females) aged 50 years and over (average 62.7 years). The mean anthropometric values for males and females were heights of 163.7 and 151.5 cm; weights 63.6 and 57.3 kg; body mass index (BMI) 23.6 and $24.9kg/m^2$; body fat 21.8 and 31.8%, respectively. Height and weight were lower, however, waist circumference (in female) and BMI were higher than those of the 2001 National Health and Nutrition Survey (NHNS). Obesity incidences of male and female subjects were 28.7% and 47.3% by BMI; 25.8% and 50.8% by % body fat; and 15.6% and 80.9% by waist circumference, respectively. Also, abdominal adiposity was very severe in female subjects of 50s. The mean biochemical measurements of male and female were as follows: systolic and diastolic blood pressure 136.9, 83.8 mmHg and 133.6, 82.5 mmHg; hemoglobin (Hb) 14.3 and 13.0 g/dL; hematocrit (Ht) 44.7 and 39.8%; blood albumin 4.15 and 4.04 g/dL; total-cholesterol 170.0 and 183.1 mg/dL; HDL-cholesterol 43.6 and 42.7 mg/dL; fasting blood glucose 96.7 and 93.0 mg/dL, respectively. Also, the prevalence of biochemically abnormal subjects according to each cut-off point of biochemical measurements were analyzed. The results for male and female were; hypertension 58.0% and 47.2%; iron deficient anemia 19.3% and 20.6% by Hb, 7.2% and 11.9% by Ht; hypoalbuminemia 9.8% and 11.7%; diabetes 12.0% and 10.2%; hypercholesterolemia 19.5% and 30.5%, respectively. From those results we found that hypoalbuminemia, hypertension and hypercholesterolemia were prevalent, and obesity in females of 50s, iron-deficient anemia and diabetes in males of 70 years and over were significant health problems in this area. Therefore, it seems to be necessary to examine their health status periodically and provide the appropriate health and nutrition education program, which includes low sodium intake, balanced diet, exercise and weight control, to prevent the occurrence of chronic diseases.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.295-307
• /
• 2006

Objective: The purpose of this study was to compare the histological and biomechanical characteristics of self-tapping and self-drilling microscrew implants. Methods: 112 microscrew implants (56 self-drilling and 56 self-tapping) were placed into the tibia of 28 rabbits. The implants were loaded immediately with no force, light (100 gm), or heavy force (200 gm) with nickel-titanium coil springs. The animals were sacrificed at 3- and 5-weeks after placement and histologic and histomorphometric analysis were performed under a microscope. Results: All microscrew implants stayed firm throughout the experiment. There was no significant difference between self-drilling and self-tapping microscrew implants both in peak insertion and removal torques. Histologic examinations showed there were more defects in the self-tapping than the self-drilling microscrew implants, and newly formed immature bone was increased at the interface in the self-tapping 5-week group. There was proliferation of bone towards the outer surface of the implant and/or toward the marrow space in the self-drilling group. Histologically, self-drilling microscrew implants provided more bone contact initially but the two methods became similar at 5 weeks. Conclusion: These results indicate the two methods can be used for microscrew implant placement, but when using self-tapping microscrew implants, it seems better to use light force in the early stages.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.349-358
• /
• 1996

To extract or not to extract permanent teeth for the correction of malocclusion has been a great debate in the history of orthodontics, and there is a variety of analytic methods and criteria to aid in the diagnosis. Extraction formulas that has been presented are many analytic methods that depend on arch length discrepancy, dental prominence, and skeletal pattern of the each patients. Of these analysis, the most important diagnostic factor is patient's skeletal pattern. Because the behavior of the dentition is closely dependent upon the skeletal pattern of each patient, dentition must be arranged within that person's skeletal frame. EI(Extraction Index) is composed of CF, interincisal angle, and lip position. CF is made of ODI and APDI that differentiate vertical and horizontal component of the skeletal pattern. So, EI not only represents patient's skeletal pattern, but also takes facial appearance into consideration. This study was undertaken to investigate EI and related cephalometric variables on the cephalogram of Korean adolescents which consisted of 153 persons with normal occlusion, harmonious skeleton and pleasing face. The following conclusions were obtained. 1. The mean value of the ODI is $73.5^{\circ}$, APDI $82.5^{\circ}$, CF $156.3^{\circ}$ 2. The mean value of the interincisal angle is $123.6^{\circ}$ 3. The mean distance of upper lip to E-line is 0.0mm, lower lip to E-line is 1.4mm. 4. The mean value of the EI is $153.8^{\circ}$.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.231-240
• /
• 2007

Objective: The purpose of this study was to investigate the maxillary protraction effects of the Tandem Traction Bow Appliance (TTBA), a new appliance devised several years ago for the treatment of growing skeletal Class III patients. Methods: Participants were 88 Korean children (42 boys, 46 girls) with skeletal Class III malocclusion treated with TTBA at the orthodontic clinic of Ewha Womans University Mokdong Hospital. Mean age at the start of treatment was 7.5 years${\pm}$1.5 years. Mean treatment periods were $13{\pm}3$ months. Pretreatment and posttreatment lateral cephalograms were traced and superimposed by the same investigator and analyzed by modified McNamara analysis and pitchfork analysis. Changes were evaluated with paired t-tests at a significance level of p<0.05. Results: The maxilla and maxillary dentition moved forward. The mandible moved backward, although not significantly; and the mandibular dentition moved forward. The net dental changes combined with the apical base change resulted in a favorable total molar relationship correction. Net dental movement was 26% and the apical base change 74% of the total molar relationship correction. Conclusion: These results suggest that TTBA has a maxillary protraction effect that can be useful in the treatment of growing skeletal Class III malocclusion with maxillary deficiency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2016

With the development of fast construction mode in shipbuilding market, the demand on accuracy management of hull is becoming higher and higher in shipbuilding industry. In order to enhance production efficiency and reduce manufacturing cycle time in shipbuilding industry, it is important for shipyards to have the accuracy of ship components evaluated efficiently during the whole manufacturing cycle time. In accurate shipbuilding process, block accuracy is the key part, which has significant meaning in shortening the period of shipbuilding process, decreasing cost and improving the quality of ship. The key of block accuracy control is to create a integrate block accuracy controlling system, which makes great sense in implementing comprehensive accuracy controlling, increasing block accuracy, standardization of proceeding of accuracy controlling, realizing "zero-defect transferring" and advancing non-allowance shipbuilding. Generally, managers of accuracy control measure the vital points at section surface of block by using the heavy total station, which is inconvenient and time-consuming for measurement of vital points. In this paper, a new measurement method based on point clouds technique has been proposed. This method is to measure the 3D coordinates values of vital points at section surface of block by using 3D scanner, and then compare the measured point with design point based on ICP algorithm which has an allowable error check process that makes sure that whether or not the error between design point and measured point is within the margin of error.