• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1896-1897
• /
• 2005

보이드, 이물, 돌기 둥 고분자 절연체 내의 결함은 이곳에 전계가 가해질 때, 국부적 전계집중을 유발하며, 절연체 내의 미소 방전을 일으킨다. 이 때 발생한 미소 방전에 의해 보이드 표면의 고분자 물질은 기계적, 화학적 열화를 일으키며, 이에 따라 전기적 트리를 형성하게 된다. 이러한 트리는 결국 절연체의 절연파괴로 진전되므로, 고분자 물질을 절연물로 사용하는 전력기기의 경우에는 신뢰성에 큰 문제를 유발한다. 따라서, 이러한 방전(부분방전)이 일어날 때 생기는 전기적 신호를 검출하여, 절연물의 신회성을 평가하는 것은 매우 중요하다. 이러한 부분방전은 IEC둥 국제기술기준에 그 제한 값이 정하여져 있으며, 본 논문에서는 이러한 값을 수학적으로 평가하는 방법에 대해 연구하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.89-90
• /
• 2023

대단위 건축물 및 구조물 철거작업시 철거사업 참여 주체인 발주자, 감리자, 시공자 및 근로자등의 안전사고 예방을 위한 사전 위험성평가 및 안전대책 수립, 수립된 안전대책 이행에 대한 역할이 매우 중요하다. 건축물 및 구조물 철거작업 공법은 인력철거공법 및 장비철거공법, 발파철거공법으로 구분되며 발파철거공법 적용시 발생되는 소음 및 진동을 계측하여 환경규제 기준내로 준수해야 한다. 본 연구는 발파공업에 의한 철거작업시 국내·외 소음 규제치 비교를 통해 국내의 발파공법에 의한 소음 규제치를 합리적으로 조정하여 건축물 및 구조물의 철거작업시 발파공업의 채택이 활성화 되기를 기대한다.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.509-522
• /
• 1996

By studying the relationship between the morphology of mandibular symphysis and craniofacial morphology in classIII malocclusion, this study aims at deciding whether the morphogy of mandibular symphysis can be used as a predictor on the growth of mandible. The materials used for this study were the cephalometric radiographs of male class III malocclusion. The subjected age groups were 10-12(G1 group) and 20 and above(G2 group): 50 were selected from each group. Each group was again divided, according to the ratio of symphysis, into Large(L), Average(A), and Small(S). The results of this study were summarized as follows: 1. In average the ratio of symphysis, G2 group showed significantly bigger than G1 group(p<0.05) 2. In both G1 and G2 groups, the ratio of symphysis had no relationship with the measurements on the cranial base and the maxilla(p>0.05). 3. In both G1 and G2 groups, there was not distinct difference in the antero-posterior positions among L, A, S subgroups. 4. L and A subgroups showed significantly larger than S subgroup in lower gonial angle and chin angle in G1 group (p<0.05). 5. In the measurements on the vortical relation of the face, anterior total face height(ATFH) and anterior lower face height(ALFH) of L subgroup were significantly larger than that of S subgroup in G1 group(p<0.05) and also mandible showed a tendency to grow downward vertically. 6. In the measurements on the tooth position and inclination, L subgroup showed as compared with S subgroup a tendency of extrusion of maxillary and mandibular teeth in G1 group, but G2 group showed such tendency only in mandibular teeth. 7. In the measurements on the abnormal growth prediction by Schulhof, in G1, there was no significant difference among L, A, S sugroups. 8. In the correlative analysis of the ratio of symphysis and other measurements, G1 group showed significant correlationships in chin angle, PP/MP angie, ANS-Me and other, while G2 group showed the same only in MP-LIT and MP-LMMC(p<0.05, p<0.01). In summarizing the above, in the G1 group, consisting of young males, no difference was noted in horizontal relation between L and S subgroups; in vertical relation, L subgroup showed a stronger tendency of downward growth of mandible than S subgroup. In adult male G2 group, however, no distinct morphological difference of craniofacial complex by the ratio of symphysis.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.255-265
• /
• 1996

The purpose of this study was to investigate if there were a significant difference between cephalometric measurements of mandibular position derived from a centric occlusion tracing compared to those of a converted centric relation tracing in the Class III malocclusion. The sample consisted of 25 Class III malocclusion and 25 normal occlusion persons who had no orthodontic treatment. The records included an lateral cephalometrics in centric occlusion, centric relation and centric occlusion bite registration and diagnostic casts mounted on the SAM II articulator in CR. The amount of CR-CO discrepancy of condyle was recorded using a MPI(Mandibular Position Indicator, MPI $200^{(R)}$, Great Lakes Orthodontics, USA). The conversion of the CO cephalogram to CR using the MPI readings was performed on the Conversion work sheet. Measures of mandibular position were chosen for the purpose of this study. The comparison of the difference between CO and CR cephalometric measurements in the normal occlusion and Class III malocclusion group were studied. The results were as follows: 1. In the features of CR-CO discrepancy of the condyle, the condyle was displaced posterior and inferior when the teeth were in centric occlusion. The horizontal component(${\Delta}X$) in Class HI malocclusion group was greater than the vertical component(${\Delta}Z$) and also greater than the horizontal component(${\Delta}X$) in normal occlusion group. There was no statistically significant correlation between MPI measurements and the groups of normal occlusion and Class III malocclusion group. 2. In the comparison of the cephalometric measurements in each group, Normal occlusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity and ODI. Class HI malocclusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity, ODI, SNB, APDI, L1-FP and it had more significance than the normal occlusion group. 3. The Value of cephalometric measurements was significantly different between CO and CR but there were no differences between the groups of normal occlusion and Class III malocclusion. The results of this study suggest that if the discrepancies are greater than the amount of normal displacement from clinically captured centric relation, centric relation should be considered as the starting point for proper diagnosis and treatment planning.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.3
• /
• pp.329-336
• /
• 2002

The purpose of this study was to investigate of attitudinal beliefs regarding smoking, and antioxidant vitamins status between smokers and non-smokers in college male students. Attitudinal beliefs regarding smoking and antioxidant vitamins intake were investigated by a questionnaire. The result obtained were as follows: Anthropometric measurements were no significant differences between smokers and non-smokers. The attitudinal beliefs regarding smoking of smokers were different from those of non-smokers(p<0.001). Compared with non-smokers, smokers responded more positively on advantage of smoking, while they felt less negatively on disadvantage of smoking. Systolic blood pressure(SBP) and diatolic blood pressure(DBP) of smokers were significantly higher than those of non-smokers(p<0.05). Although antioxidant vitamins intake was not significantly different between smokers and non-smokers, plasma level of vitamin C of smokers was significantly lower than that of non-smokers(p<0.05). However, plasma level of vitamin E was not significantly different between smokers and non-smokers.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.407-418
• /
• 2003

The purpose of this study is to analyze dentoalveolar compensation in normal occlusion samples previously classified into 9 skeletal types, and to provide clinically applicable diagnostic criteria for individual malocclusion patients. Cephalometric measurements of the 294 normal occlusion samples previously divided into 9 types were analyzed. The descriptive features of dentoalveolar variables were compared for the 9 types using analysis of variance, followed by post hoc multiple comparisons. In addition, the correlation between skeletal and dentoalveolar variables were analyzed. Discriminant analysis with a stepwise entry of variables was designed to find out several potential variables for use in skeletal typing. The dentoalveolar compensation pattern of the skeletal types varied, especially with regards to the variables that indicated the inclination of incisors and the occlusal plane. Stepwise variable selection identified four variables: AB-MP, SN-AB, PMA and ANB. Discriminant analysis assigned a classification accuracy of $87.8\%$ to the predictive model. On the basis of these results, this study could provide rudimentary information for the development of diagnostic criteria and treatment guidelines for individual skeletal types.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2012

This paper aimed at the development of a unified wireless control system in order to control various forms of vibration of bridges. This unified wireless control system unified all different systems each of which functioned for difference purpose such as measurement, analysis, judgement, and control of data acquired from the movement of structure. It was designed to control structures with feedback which was returned according to each different situation after analyzing various signals measured about the structure. In this system, every information in each step from measurement to control was wirelessly transmitted to its central system so that a manager was able to effectively monitor the whole process. Just for the case when any system control need to intervene occurred, a graph user interface was designed for better access. In order to evaluate its basic performance, an experiment was carried out to see how signal input and output were done by comparing its results with those of a wired system. On the basis of the experiment, a vibration control experiment was performed on a model of cable-stayed bridge to see if the unified wireless control system worked well in realtime. This was carried out under four conditions, and the graph and quantitative result under each condition were compared each other. All experiments proved that the unified wireless control system functioned as well as the wired one in terms of its basic performance and vibration control.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.691-695
• /
• 2023

Currently, the utilization of measurement results of the automated measurement system is very low and is at the level of providing only fragmentary measurement results. In this study, we are going to study a structure behavior analysis 3D display system with high precision and reliability for automated measurement data obtained by constructing big data by transmitting massive data values measured in real time to the cloud and using a Python-based algorithm. As a result of the study, as a system that can evaluate the behavior of a structure to a manager in real time, it provides analysis data in real time without significant restrictions regardless of the type of measurement data and sensor, and derived it as a 3D display. In addition, it was analyzed that the manager could grasp the behavior graph of the structure in real time and more easily judge the derivation of the weak part of the structure through data analysis. In the future, by analyzing the behavior of structures in three dimensions using past and present data, it is expected that more effective measurement results can be obtained in terms of repair, reinforcement, and maintenance of realistic structures.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.731-740
• /
• 1998

In the previous studies about prescription of preadjusted appliance, occlusal plane was used as a reference plane for crwon angulation (tip) measurement. But this reference plane is not parallel to the line connecting the facial axis points at which the centers of brackets are positioned (Andrews' plane), due to the curve of Spee. Therefore, we developed a new reference plane unaffected by the curve of Sun and more parallel to the Andrews' plane. It is an imaginary line connecting mesial and distal marginal ridges of each posterior tooth, and we named it 'marginal ridge plane'. In this study, crown angulations of posterior teeth of 29 normal occlusion samples were measured and measurements from both reference planes were compared. Crown angulation measurements measured from occlusal plane were different from crown angulation measurements from marginal ridge plane in the upper and lower 2nd molars (p<0.01), md 1st premolars (p<0.05). These results were analyzed as the crown angulation measurements from occlusal plane were affected by the curve of Spee. Crown angulations should be varied according to the amount of curve of Spee to maintain the continuity of marginal ridges. To solve this problem, determining bracket angulation as the bracket slot is parallel to the marginal ridge plane of each posterior teeth is recommended.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.1-11
• /
• 2016

This study deals with the case that was the field application of the microseismic monitoring techniques for the stability monitoring in a domestic mine. The usefulness and limitations of the microseismic techniques were examined through analyzing the microseismic monitored data. The target limestone mine adopted a hybrid room-and-pillar mining method to improve the extraction ratio. The accelerometers were installed in each vertical pillar within the test bed which has the horizontal cross-section $50m{\times}50m$. The measured signals were divided into 4 types; blasting induced signal, drilling induced signal, damage induced signal, and electric noise. The stability analysis was performed based on the measured damage induced signals. After the blasting in the mining section close to the test bed, the damage of the pillar was increased and rockfall near the test bed could be estimated from monitored microseismic data. It was possible to assess the pillar stability from the changes of daily monitored data and the proposed safety criteria from the accumulated monitored data. However, there was a difficulty to determine the 3D microseismic source positions due to the 2D local sensor arrays. Also, it was needed to use real-time monitoring methods in domestic mines. By complementing the problems encountered in the mine application and comparing microseismic monitored data with mining operations, the microseismic monitoring technique can be used as a better safety method.