• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.789-797
• /
• 2021

The worldwide sizes of container ships are rapidly increasing. The container ship size in 2005, which was about 9,200 TEU has increased to 24,000 TEU in recent times. In addition to the increase in the sizes of the container ships, the arrivals/departures of large container vessels to/from Korea have also increased. Hence, the necessity for reviewing safe passage of such vessels is emphasized. In the present study, a 24,000 TEU container vessel was used as a model ship to calculate the under-keel clearance (UKC) at Gadeok Channel through which vessels must pass to arrive at Busan New Port, in accordance with the Korean Port and Fishing Port Design Standards and Commentary. In addition, the maximum allowable speed that meets UKC standards was calculated using various squat formulas, whose results were then compared with the current speed limit standards. The analysis results show that Busan New Port requires 10% marginal water depth, and the squat that meets this requirement is 0.95 m. Gadeok Channel requires 15% marginal water depth, and the squat that meets this requirement is 1.78 m; in this case, the maximum allowable speed is calculated as 15 kts. Busan New Port has set the speed limit as 12 kts, which is higher than the calculated 11 kts. Thus, speed limit reconsideration is required in terms of safety. However, the set speed limit for Gadeok Channel is 12 kts, which is lower than the calculated 15 kts. Thus, additional considerations may be provided to increase the speed limits for smooth navigational passage of vessels. The present study, however, is constrained by the fact that it reflects only a limited number of elements in the UKC and allowable speed calculations; therefore, more accurate UKC and safe speed values can be suggested based on extended studies to this research.

• Korean Journal of Organic Agriculture
• /
• v.29 no.2
• /
• pp.223-240
• /
• 2021

This study was carried out to investigate the economic value of organic wheat production using gelatin·chitin microorganisms in Gwangsan-gu, Gwangju city. The soil condition of experiment field was clay loam Jisan series. The organically cultivated fields were sprayed gelatin and chitin degrading bacteria. The test was performed at conventionally cultivated field and organically cultivated field. Emergence of weed on organically cultivated field was significantly higher than conventionally cultivated field which sprayed herbicide before seeding. Weed emergence have a critical impact on grain yield. Occurrence of diseases and insect pests were higher than conventionally cultivated fields. In 2019, the amount of lodging in conventionally cultivated field were higher than conventionally cultivated field. In 2020, lodging and wet injury were occur in both field. Comparing yield element between organically and conventionally cultivated experimental area, grain yield in organically cultivated field was shown slightly higher amount than conventionally cultivated field. However in the actual yield of 2019, organically cultivated field shows 20% deceased yield because of overgrown weed. In 2020, weed emergence and yellow mosaic virus by wet injury cause 30% decease in the grain yield in organically cultivated field. Content of protein, carbohydrates, ash, water and fat in the grain were not different significance. In 2019, net incomes of conventionally cultivated wheat was 461,031 won/0.1 ha while organically cultivated wheat was 443,437 won/0.1 ha. In the rate of income, conventionally cultivated field was 83.0% as against organically cultivated field (73.3%). In 2020, net incomes of organically cultivated wheat was 437,812 won/0.1 ha while conventionally cultivated wheat was 418,281 won/0.1 ha. In the rate of income, conventionally cultivated field was 81.6% as against organically cultivated field (73.0%).

• Journal of Korean Philosophical Society
• /
• v.126
• /
• pp.109-132
• /
• 2013

The most important vocabulary in Advaita $Ved{\bar{a}}nta$, which is anthropology and soteriology on the self, is of course '${\bar{a}}tman$' or 'the self', to which '$an{\bar{a}}tman$' or 'the other' is in opposition. As $Ved{\bar{a}}ntic$ system revolves around the concept ${\bar{a}}tman$, it can be compared favorably with 'final vocabulary' of Richard Rorty. Moreover, $Ved{\bar{a}}ntic$ system can be termed as 'a return of self-identity', in which a process of returning is from a deceived self to the true and original self. After all, story of '$an{\bar{a}}tman$' or 'the other' in $Ved{\bar{a}}nta$ seems to have no significance at all. However, discourse about the other can also lead a something fruitful. There are such doctrines in $Ved{\bar{a}}nta$ that support a procedure of self-realization not according to the Hegelian dialectic but to the transposition and continuous antagonism between the self and the other, as a special meaning of viveka (discrimination) that fixes a boundary between the self and the other, a destruction of falsehood that is more important than establishment of truthfulness, a transposition of the true and the false before and after self-realization. Thus the other is not disappeared but only hidden, even after accomplishing its own methodological role, and the same is with discourse about the other. To revive forgotten vocabulary in $Ved{\bar{a}}nta$ is an attempt to reconstruct devaluated story by means of shifting the pivot of discourse from the self to the other. The essential thing in this attempt may be to revive the conceptions of 'effort' that is intently concealed and of 'self-inquiry' that has lost its true meaning. Out of these, a systematic and continuous self-inquiry, consists in having a scenario on the question 'Who am I?' and utilizing that scenario by experience without interruption. A work of reconstructing the lost narratives in $Ved{\bar{a}}nta$ can be feasible only when the history of self-inquiry is redescribed in the system itself, provided that object of inquiry is not 'a self as the self' but 'a self as the other'.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.66-81
• /
• 2014

Burnt down during the Imjin War(壬辰倭亂) of 1592, Gyeongbokgung Palace(景福宮) remained in ruins until 1865, when in the second year of King Gojong's(高宗) reign, reconstruction work began. At the time, a royal protocol(uigwe, 儀軌) for the reconstruction was not produced. Instead, the Gyeongbokgung Palace Construction Diary(Gyeongbokgung yeonggeon ilgi, 景福宮營建日記) records the reconstruction process from June to September of 1865. The contents of this diary reveal that the stone used in the construction was obtained from Ganghwa(江華), the Yeongpung field(映楓亭) just beyond Dongdaemun, and Samcheongdong(三淸洞), among other sites. In addition, selected stone remaining from the original Gyeongbokgung Palace site - such as that from the palace astronomical observatory(ganuidae, 簡儀臺) - as reused, while a number of buildings and stonework from Gyeonghuigung Palace(慶熙宮) were moved to Gyeongbokgung Palace. As a result, a number of $17^{th}$ and $18^{th}$ century stonework are currently located at Gyeongbokgung Palace. The Gyeongbokgung Palace Construction Diary contains a record indicating that the bronze dragon(靑銅龍) excavated from the lotus pond at the palace's Gyeonghoeru Pavilion(慶會樓) was created by special technician byeolganyeok(別看役) Kim Jae-su(金在洙) in 1865 for the symbolic purpose of protecting the palace from fire. The diary also reveals that among Kim Jae-su and the other special technicians(byeolganyeok) tasked with the installation and oversight of the palace stonework was Lee Se-ok(李世玉) - aid to have created the haechi statue at Gwanghwamun Gate. This indicates that there were men of court painter(hwawon, 畵員) background among the construction special technicians(byeolganyeok). Moreover, the diary records the names of the stoneworkers(seokjang, 石匠) who worked under these special technicians to actually carve the stonework. These included Jang Seong-bok(張聖福), who participated in the creation of the Geunjeongjeon Hall(勤政殿); and Kim Jin-myeong(金振明), who took part in the construction of Gwanghwamun Gate(光化門). Based on these results, it is possible to identify a number of special iconographic features of the scale-covered animal form(insuhyeong, 鱗獸形) auspicious animal statues at Gyeongbokgung Palace. These include a protruding mouth and large nose, formalized ears, and a mane along the back. Comparing these iconographic features with those found in the stonework of Joseon tombs makes it clear that these palace statues were created in the latter half of the $19^{th}$ century - the period corresponding to Gojong's palace reconstruction. This study was able to confirm that this iconography was taken up by the Gyeongbokgung Palace construction special technicians(byeolganyeok) and stoneworkers(seokjang) as they worked on tomb stonework earlier in their careers.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.4-31
• /
• 2018

The Neolithic pottery excavated from the Jungsandong site has been classified into four types of pottery (I: feldspar type, II: mica type, III: talc type and IV: asbestos type) according to their mineral composition. These four types of potteries generally appear to have undergone incomplete firing, while the level of oxidation in the type I pottery objects, which have a relatively higher clay content, was found to be particularly low. The type III objects, which have a high talc content, are judged to have been somewhat slow in removing carbon because they contain saponite belonging to the smectite group. Of the four types of pottery, type IV showed the highest redness and the most uniform characteristics, thus indicating a good level of oxidation. In particular, fixed carbide (C; 33.7 wt.%) with a thickness of about 1mm, and originating from organic substances, was detected inside the walls of the type I pottery, while the deep radial cracks in the outer surfaces of the pottery are thought to have been caused by repeated thermal shocks. Given that all of the pottery except for the type I artifacts are considered to be have been made for storage purposes, those containing talc and tremolite are easy to done liquid storing vessels based on an analysis of their material characteristics. As for the type II relics, which are composed of various minerals and exhibit poor physical properties, they seem to have been used for simple storage purposes. As domestic talc and asbestos mines were concentrated in the areas of Gyeonggi, Gangwon, Chungbuk, and Chungnam, it seems likely that talc and tremolite were produced as contiguous minerals. Considering the distance between the remains in Jungsandong and these mines and their geographical distribution, there is a possibility - albeit somewhat slight - that these mines were developed for the mining of various minerals. Although ultramafic rock masses - such as serpentine capable of generating talc and tremolite - have not been found in the Jungsandong area, limestone and biotite granite containing mica schist have been identified in the northwestern part of Yeongjong Island, indicating that small rock masses might have formed there in the past. Therefore, it is judged necessary to accumulate data on pottery containing talc and tremolite, other than the remains in Jungsandong, and to investigate the rocks and soils in the surrounding area with greater precision. The firing temperatures of the pottery found at the Jungsandong site were interpreted by analyzing the stability ranges of the mineral composition of each type. As a result, they have been estimated to range from 550 to $800^{\circ}C$ for the type I artifacts, and from 550 to $700^{\circ}C$ for the type I, II and IV artifacts. However, these temperatures are not the only factors to have affected their physical properties and firing temperature, and the types, particle sizes, and firing time of the clay should all be taken into consideration.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.102-113
• /
• 2019

Slack-tide sampling was carried out at 6 stations at high and low tide for a tidal cycle during spring tide of the early summer (June) and summer (July, August) of 2016 to determine the difference of water quality according to tide in Masan Bay, Korea. The mixing regime of all the water quality components investigated was well explained through the correlation with SAL. In the early summer and summer, TURB, DSi and NNN which mainly flow into the bay from the streams and SS, COD, AMN and $H_2S$ which mainly indicate the internal sink and source materials have a property of conservative mixing and non-conservative mixing, respectively. The conservative mixing showed a good linear relationship of the water quality between high and low tide, and the non-conservative mixing showed a variation of different pattern each other. Factor analysis performed on the concentration difference data sets between high and low tide helped in identifying the principal latent variables for them. In early summer, multiple effects (tidal action, natural influx and internal sinks and sources etc.) acted in combination for the differences to be distributed evenly in four factors (VF1~4), since there were few allochthonous inputs as a low-water season. On the contrary, in summer, the parameters showing large concentration difference at ST-1 affected by stream water were concentrated in one factor (VF1) and clearly distinguished from the parameters affected by the internal sinks and sources. In fact, there is no estuary (bay) that always maintains steady state flow conditions. The mixing regime of an estuary might be changed at any time due to the change of flushing time, and furthermore the change of end-member conditions due to the internal sinks and sources makes the occurrence of concentration difference inevitable. Therefore, when investigating the water quality of the estuary, it is necessary to take a sampling method considering the tide to obtain average water quality data.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.270-279
• /
• 2018

Purpose: The aim of this study was to assess the patients' perception, acceptance, and preference of the difference between a conventional impression and digital impression through questionnaire survey. Materials and Methods: Thirteen (6 male, 7 female) subjects who experienced both digital and conventional impression at the same day were enrolled in this study. Conventional impression were taken with polyvinylsiloxane and digital impression were performed using a newly developed intra-oral scanner. Immediately after the two impressions were made, a survey was conducted with the standardized questionnaires consisting of the following three categories; 1) general dental treatment 2) satisfaction of conventional impression 3) satisfaction of digital impression. The perceived source of satisfaction was evaluated using Likert scale. The distribution of the answers was assessed by percentages and statistical analyses were performed with the paired t-test, and P < 0.05 was considered significant. Results: There were significant differences of the overall satisfaction between two impression methods (P < 0.05). Digital impression showed high satisfaction in less shortness of breath and odor to participants compared to conventional impression. The use of an oral scanner resulted in a discomfort of TMJ due to prolonged mouth opening and in lower score of the scanner tip size. Conclusion: It was confirmed that the preference for the digital impression using intraoral scanner is higher than the conventional impression. Most survey participants said they would recommend the digital impression to others and said they preferred it for future prosthetic treatment.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.318-345
• /
• 2013

This study was carried out with a focus on the factor on the periodical space organization of Daebodan (大報壇: the altar of great recompense) in Changdeok Palace, which is significant in terms of political history in the late Chosun Dynasty, and consider the factors in the formation of the structural system through historical records and drawings. Daebodan has the ideology of righteousness to the Ming Dynasty which the hierarchy of the Joseon Dynasty. who felt the crisis of the domination order, imposed as a solution after the Manchu war of 1636. In addition, Daebodan was built by complex factors that entailed the self-esteem of the 'Joseon Centralism Ideology (朝鮮中華)' and the desire of the sacrificial rituals for Heaven that were imminent to the kings of Joseon. Superficially, Daebodan has the spatial organization of the Sajik (社稷) Altar and the placement of an annex building, but had the applied placement due to limited topography and access to the backyard. Furthermore, the lateral structure of Daebodan multiply accepted various factors of the nine step's stairs, the hight of five cheok (尺), the circumstance of two floors that were showed in the altar and platform with small fences and an imperial order including the internal form of Hwangjangbang (黃帳房). Moreover, the name of the alter came from 'the Jiaote Sheng Book of Rites(禮記 郊特牲)' representing 'the suburban sacrifice ritual for Heaven (郊天)', and it was built by not only combining the system of the Sajik Altar in the Joseon Dynasty and China but also avoiding 'excessive etiquette (僭禮).' The point is a remarkable feature shown by the structural system of Daebodan. Thus, it is considered that the 'Notion of Confucian-Cultural Succession (中華繼承意識)' and the desire of the sacrificial rituals for Heaven were expressed by the structure and form of altar. This study examined the process of the creation, expansion, decline and disposal of Daebodan in a chronological order, and found that the ruling ideology of the governing elite by the political and cultural background of the era at each transitional point was reflected in the spatial formation of the altar. On the other hand, as a result of performing a field survey to find the location in accordance with Daebodan in drawing materials, there remains items such as worked stones from Daebodan, precast pavers and fragments of proof tile discovered in the surrounding of tora vine (Actinidia arguta) which is a natural monument of Changdeok Palace. As such, verification through future excavation and investigation is required.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.108-125
• /
• 2013

This study examined the actual reconstruction drawing, composite mineral, particle size and property test, fine organic matters, color differences and main ingredients of the earthen mold excavated in Dongcheon-dong, Gyungju. The cross-section of the inner mold and outer mold divides into inside (1st layer) and outside (2nd layer), with organic matters mixed outside. The cross-section has been altered due to heat and form removal agent. X-ray analysis revealed that the layer was made of minerals with high transmissivity and only quartz particles were observed through a polarizing microscope. The inside of cross-section in SEM observation identified enlarged air gap, with crack developed in the center, but no changes observed on the outside. The particle size of the composites is almost the same for the inner mold and outer mold and is silt clay loam. The ratio between silt clay and silt clay loam was about 2.7:1 and 2.9:1 respectively. In the property test, the density and absorption rate of inner mold and outer mold were similar, but porosity was different, with inner mold of 27.36% and outer mold of 31.09%. The color difference of cross-section seems to have been caused by the spread of soot on the 1st layer surface for removal of form or by the covering of ink to protect the 1st layer. Composite mineral analysis revealed the same composition for the inner mold and outer mold, except for the magnetite that was detected in the inner mold alone. As for the main ingredient analysis, the average content of $SiO_2$ was 71.64% and that of $Al_2O_3$ was 14.59%. As for the sub-ingredients, $Fe_2O_3$ was 4.51%, $K_2O$ 3.06%, $Na_2O$, MgO, CaO, $TiO_2$, $P_2O_5$ and MnO was less than 2%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2019

Electric arc furnace dust (EAFD), which is a dust waste generated in the steel manufacturing process, contains heavy metals. Recently, researches of recycling a large amount of valuable metals such as zinc and iron in EAFD are being actively carried out. In this study, EAFD is used as a substitute for cobalt in blue ceramic pigments without any pretreatment. Then, the synthesized blue ceramic pigment using EAFD was micronized and formulated as a ceramic ink for inkjet printer. The particle size distribution, crystal structure and color characteristics during the micronization process were investigated for the development of ceramic ink. $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed excellent blue coloric properties and monomodal distribution through micronization process. The average particle size of $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments after 3 hours of milling was $0.271{\mu}m$, which is smaller than $0.303{\mu}m$, which is the average particle size of $CoAl_2O_4$ ceramic pigments without EAFD after 5 hours of milling. Especially, it was confirmed that $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed a color difference (${\Delta}E{^*}_{ab}$) value of 5.67, which smaller than ${\Delta}E{^*}_{ab}$ value of $CoAl_2O_4$ during micronization. These results show that EAFD can be used as a raw material for a blue ceramic pigment by replacing expensive cobalt without any pretreatment.