• Applied Microscopy
• /
• v.36 no.3
• /
• pp.217-226
• /
• 2006

Image processing by ultra high voltage electron microscopy (UHVEM) and tomography has offered major contributions to research in the field of cellular ultrastructure. Furthermore, such advancements also have enabled the improved analysis of three-dimensional cellular structures in botany. In the present study. using UHVEM and tomography, we attempted to reconstruct the three-dimensional images of plastid inclusions that probably differentiate during photosynthesis. The foliar tissues were studied Primarily with the TEM and further examined with UHVEM. The spatial relationship between tubular elements and the thylakoidal membrane and/or starch grains within plastids mainly have been investigated in CAM-performing Sedum as well as in $C_4$ Salsola species. The inclusion bodies were found to occur only in early development in the former, while they were found only in mesophyll cells in the latter. The specimens were tilted every two degrees to obtain two-dimensional images with UHVEM and subsequently comparison has been made between the two types. Digital image processing was performed on the elements of the inclusion body using tilting, tomography, and IMOD program to generate and reconstruct three-dimensional images on the cellular level. In Sedum plastids, the inclusion bodies consisted of tubular elements exhibiting about 20 nm distance between elements. However, in Salsola, plastid inclusion bodies demonstrated quite different element structure, displaying pattern, and origin relative to those of the Sedum. The inclusion bodies had an integrative relationship with the starch grains in both species.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.79-89
• /
• 2023

A multi-view display is regarded as the most practical technology to provide a three-dimensional effect to a viewer because it can provide an appropriate viewpoint according to the observer's position. But, most multi-view displays with flat shapes have a disadvantage in that a viewer watches 3D images only within a limited front viewing angle. In this paper, we proposed a spherical display using a ball lens with spherical symmetry that provides perfect parallax by extending the viewing zone to 360 degrees. In the proposed system, each projection lens is designed to be packaged into a small modular array, and the module array is arranged in a spherical shape around a ball lens to provide vertical and horizontal parallax. Through the applied optical module, the image is formed in the center of the ball lens, and 3D contents are clearly imaged with the size of about 0.65 times the diameter of the ball lens when the viewer watches them within the viewing window. Therefore, the feasibility of a 360-degree full parallax display that overcomes the spherical aberration of a ball lens and provides a wide field of view is confirmed experimentally.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.533-546
• /
• 2014

This paper presents a method for a hybrid (color and depth) camera system construction using a photogrammetric technology. A TOF depth camera is efficient since it measures range information of objects in real-time. However, there are some problems of the TOF depth camera such as low resolution and noise due to surface conditions. Therefore, it is essential to not only correct depth noise and distortion but also construct the hybrid camera system providing a high resolution texture map for generating a 3D model using the depth camera. We estimated geometry of the hybrid camera using a traditional relative orientation algorithm and performed texture mapping using backward mapping based on a condition of collinearity. Other algorithm was compared to evaluate performance about the accuracy of a model and texture mapping. The result showed that the proposed method produced the higher model accuracy.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.552-557
• /
• 2008

'Digilog Book' dealing with the combination of each advantage of analog sensibility on texts and digital sensation on virtual reality is one of the noble applications of U-book. Based on contents from books, enhancing 3D immersive display enable readers to enjoy various experiences with multisensory feedback provided. Also, 'Digilog Book' provides digitally created stories that would project different experiences and environments interacting users' choices on the interface of the book. This study focuses on developing users friendly implementation tools providing more interaction between digitally generated stories and digitally generated interface so that interaction between virtual reality and actual realty is expanded through simulating contexts and extents. From the application scenario 'Digilog Book' would perform as a storytelling tool with developing subordinated elements such as context structure, screen structure, definition of writing function, writing interface, writing system structure, etc. Therefore, this study would become a significance to direct and indicate the development of writing techniques on virtual reality back to life through digitally augmented reality.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.181-189
• /
• 2021

In order to increase the practical usability of the virtual reality(VR)-based BIM object in the construction site, the difference between the virtual image and the real image should be resolved, and when it is applied to the construction schedule management function, it is necessary to reduce the image gap between the virtual completion and the actual completion. In this study, in order to solve this problem, a prototype of 4D model is developed in which augmented reality (AR) and 3D printing technologies are linked, and the practical usability of a 4D model linked with two technologies is verified. When a schedule simulation is implemented by combining a three-dimensional output and an AR object, it is possible to provide more intuitive information as a tangible image-based schedule information when compared to a simple VR-based 4D model. In this study, a methodology and system development of an AR implementation system in which subsequent activities are simulated in 4D model using markers on 3D printing outputs are attempted.

• Radiation Oncology Journal
• /
• v.14 no.1
• /
• pp.77-85
• /
• 1996

Purpose : Multileaf collimator(MLC) is very suitable tool for conformal radio-therapy and commissioning measurements for a multileaf collimator installed on a dual energy accelerator with 6 and 10MV photons are required, For modeling the collimator with treament planning software, detailed dosimetric characterization of the multileaf collimator including the penumbra width, leaf transmission between leaf leakage and localization of the leaf ends and sides is an essential requirement. materials and Methods : Measurement of characteristic data of the MLC with 26 pair block leaves installed on CLINAC 2100C linear accelerator was performed. Low sensitive radiographic film(X-omatV) was used for the penumbra measurement and separate experiments using radiographic film and thermoluminescent dosimeters were performed to verify the dose distribution, Measured films were analized with a photodensitometer of WP700i scanner. Results : For 6 & 10 MV x-ray energies, approximately $2.0\%$ of photons incident on the multileaf collimator were transmitted and an additional $0.5\%$ leakage occurs between the leaves. Localizing the physical end of the leaves showed less than 1mm deviation from the $50\%$ decrement line and this difference is attributed to the curved shaped end on the leaves One side of a sin히e leaf corresponded to the $50\%$ decrement line, but the opposite face was aligned with a lower value. This difference is due to the tongue and groove used to decrease between leaf leakage. Alignment of the leaves to form a straight edge resulted larger penumbra at far position from isocenter as compare with divergent alloy blocks. When the MLC edge is stepped by sloping field, the isodose lines follow the leaf pattern and Produce scalloping isodose curves in tissue. The effective penumbra by 45 degree stepped MLC is about 10mm at 10cm depth for 6MV x-ray. The difference of effective penumbra in deep tissue between MLC and divergent alloy blocks is small (5mm). Conclusion : Using the characteristic data of MLC, the MLC has the clinlical acceptability and suitability for 3-D conformal radiotherapy except small field size.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1107-1115
• /
• 1996

An investigation made of the easing contraction ratio according to sewing condition (seam line; wp, wf, 45$^{\circ}$ bias, stitch density; 13 stitch/cm (0.8 mm), 9 stitch/cm (1.1 mm), 6.5 stitch/ cm (1.5 mm), 5 stitch/cm (2 mm), 4 stitch/cm (2.5 mm), thread; sp 60$^{\circ}$s/2, sp 60$^{\circ}$s/3, st 60$^{\circ}$s/3, st 50$^{\circ}$s/3)) by lockstitch industrial sewing machine with shirring foot. The correlations of the easing and sewing conditions were by SPSS PC), and visual test was done by enlarged photo. The results obstained were as follows:. 1. The easing contraction ratio is increased in proportion to the low of stitch density. 2. The easing contraction ratio of wp, 45$^{\circ}$ bias is correlated with stitch density, and that of wf be with stitch density, elongation & weight. 3. The easing contraction ratio of 13 stitch/cm (0.8 mm), 9 stitch/cm (1.1 mm), 6.5 stitch/ cm (1.5 mm), 5 stitch/cm (2.0 mm) is correlated with flexible rigidity, and that of 4 stitch/ cm (2.5 mm) be with flexible rigidity and crease-resistance. 4. As a results of SPSS PC+ statistics, the easing contraction ratio is statistically correlated to the seam line, stitch density, upper thread tension, and fabric characteristics. 5. As a results of visual test by the enlarged photo, the limit of stitch density for easing contraction was 5 stitch/cm (2.0 mm).

• Journal of Korea Game Society
• /
• v.18 no.2
• /
• pp.59-68
• /
• 2018

A visual novel, a type of digital content combining novel and game, was designed as hypermedia which includes various media, for instance, image, sound, and video. The narrative of visual novel contains multimedia elements and highlights multi-scenario structures based on hypertext. Prior to creating visual novel scenario, a writer should thoroughly consider two main points. First of all, the scenario should cover the multimedia features of visual novel. Secondly, the scenario should be structured as a multi-scenario providing with performativity to players for interaction with readers. This study examines the influence of changes in platforms on visual novel scenario adjusted to mobile environment. It would provide an opportunity to understand how storytelling changes and adapts to rapid transformation of digital media contents.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.291-300
• /
• 2001

In this paper, we developed a Satellite Image Processing System for obtaining 3-D positional information which is composed of five process modules. As a procedure of them, the Data Process module is the procedure that reads and processes the header file to generate data files. and then calculates orbital parameters and sensor attitudes for obtaining of 3-D positional information with them. The 3D Process module is to calculate 3-D positional information and the Dialog Process module is to correct the time of image frame center using the single image or stereo images for implementing the 3D Process module. We expect to obtain 3-D positional information with the header file and minimum GCPs(1∼2 points) using this system efficiently and economically in comparison with existing commercial software packages.

• Korean Journal of Veterinary Research
• /
• v.32 no.2
• /
• pp.207-210
• /
• 1992

Oral infection of colostrum-deprived, neonatal piglets with porcine enterovirus serotype 3 can result in hepatic lesions with a short incubation period. In the thin section of the affected liver, crystalline arrays of virus particles characteristic of picornavirus were identified in the sinusoid endothelial cells and Kupffer cells. There were also cytoplasmic aggregates of electron- dense, virus-like particles in the hepatocytes. These findings suggest that porcine enterovirus serotype 3 has hepatotropism as well as neurotropism.