• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.1-16
• /
• 2002

Purpose : Three dimensional conformal radiotherapy planning is being used widely for the treatment of patients with brain tumor. However, it takes much time to develop an optimal treatment plan, therefore, it is difficult to apply this technique to all patients. To increase the efficiency of this technique, we need to develop standard radiotherapy plant for each site of the brain. Therefore we developed several 3 dimensional conformal radiotherapy plans (3D plans) for tumors at each site of brain, compared them with each other, and with 2 dimensional radiotherapy plans. Finally model plans for each site of the brain were decide. Materials and Methods : Imaginary tumors, with sizes commonly observed in the clinic, were designed for each site of the brain and drawn on CT images. The planning target volumes (PTVs) were as follows; temporal $tumor-5.7\times8.2\times7.6\;cm$, suprasellar $tumor-3\times4\times4.1\;cm$, thalamic $tumor-3.1\times5.9\times3.7\;cm$, frontoparietal $tumor-5.5\times7\times5.5\;cm$, and occipitoparietal $tumor-5\times5.5\times5\;cm$. Plans using paralled opposed 2 portals and/or 3 portals including fronto-vertex and 2 lateral fields were developed manually as the conventional 2D plans, and 3D noncoplanar conformal plans were developed using beam's eye view and the automatic block drawing tool. Total tumor dose was 54 Gy for a suprasellar tumor, 59.4 Gy and 72 Gy for the other tumors. All dose plans (including 2D plans) were calculated using 3D plan software. Developed plans were compared with each other using dose-volume histograms (DVH), normal tissue complication probabilities (NTCP) and variable dose statistic values (minimum, maximum and mean dose, D5, V83, V85 and V95). Finally a best radiotherapy plan for each site of brain was selected. Results : 1) Temporal tumor; NTCPs and DVHs of the normal tissue of all 3D plans were superior to 2D plans and this trend was more definite when total dose was escalated to 72 Gy (NTCPs of normal brain 2D $plans:27\%,\;8\%\rightarrow\;3D\;plans:1\%,\;1\%$). Various dose statistic values did not show any consistent trend. A 3D plan using 3 noncoplanar portals was selected as a model radiotherapy plan. 2) Suprasellar tumor; NTCPs of all 3D plans and 2D plans did not show significant difference because the total dose of this tumor was only 54 Gy. DVHs of normal brain and brainstem were significantly different for different plans. D5, V85, V95 and mean values showed some consistent trend that was compatible with DVH. All 3D plans were superior to 2D plans even when 3 portals (fronto-vertex and 2 lateral fields) were used for 2D plans. A 3D plan using 7 portals was worse than plans using fewer portals. A 3D plan using 5 noncoplanar portals was selected as a model plan. 3) Thalamic tumor; NTCPs of all 3D plans were lower than the 2D plans when the total dose was elevated to 72 Gy. DVHs of normal tissues showed similar results. V83, V85, V95 showed some consistent differences between plans but not between 3D plans. 3D plans using 5 noncoplanar portals were selected as a model plan. 4) Parietal (fronto- and occipito-) tumors; all NTCPs of the normal brain in 3D plans were lower than in 2D plans. DVH also showed the same results. V83, V85, V95 showed consistent trends with NTCP and DVH. 3D plans using 5 portals for frontoparietal tumor and 6 portals for occipitoparietal tumor were selected as model plans. Conclusion : NTCP and DVH showed reasonable differences between plans and were through to be useful for comparing plans. All 3D plans were superior to 2D plans. Best 3D plans were selected for tumors in each site of brain using NTCP, DVH and finally by the planner's decision.

• Radiation Oncology Journal
• /
• v.18 no.2
• /
• pp.107-113
• /
• 2000

Purpose : The goal of this study 닌as to improve the accuracy of three-dimensional conformal radiotherapy (3-D CRT) by measuring the treatment setup error and physiological movement of liver based on the analysis of images which were obtained by electronic portal imaging device (EPID). Materials and Methods : For 10 patients with hepatocellular carcinoma, 4-7 portal images were obtained by using EPID during the radiotherapy from each patient daiiy. We analyzed the setup error and physiological movement of liver based on the verification data. We also determined the safety margin of the tumor in 3-D CRT through the analysis of physiological movement. Results : The setup errors were measured as 3mm with standard deviation 1.70 mm in x direction and 3.7 mm with standard deviation 1.88 mm in y direction respectively. Hence, deviation were smaller than 5mm from the center of each axis. The measured range of liver movement due to the physiological motion was 8.63 mm on the average. Considering the motion of liver and setup error, the safety margin of tumor was at least 15 mm. Conclusion : EPID is a very useful device for the determination of the optimal margin of the tumor, and thus enhance the accuracy and stability of the 3-D CRT in patients with hepatocellular carcinoma.

• Radiation Oncology Journal
• /
• v.25 no.3
• /
• pp.170-176
• /
• 2007

Purpose: To determine the role of radiotherapy for the treatment of portal vein thrombosis (PVT) from hepatocellular carcinoma (HCC). Material and Methods: A retrospective analysis was performed on 70 patients that had been diagnosed with HCC and were treated with three-dimensional conformal radiotherapy (3D-CRT) for the PVT. The radiation dose ranged from 40 Gy to 60 Gy (median dose: 48 Gy) and the biological effective dose (BED) ranged from 31.3 Gy to 78.0 $Gy_{10}$ (median dose: 61.6 $Gy_{10}$). Response was determined by measuring the extent of the PVT on a CT image at 0, 1 and 3 months after completion of the radiotherapy. The median follow-up period was 9 months. Results: The response rate was 47.1% (33 patients), with two patients (2.9%) showing a complete response, 31 patients (44.3%) showing a partial response, and 35 patients (50%) showing stable disease or no response. The 1-year progression-free survival rate was 60%, and the median progression-free survival time was 17 months. The median overall survival time was 11 months, the median survival time in the responders was 15 months and in the nonresponders was 8 months (p=0.032). Four patients (5.7%) had transient liver function impairment during treatment. Radiation induced liver disease (RILD) was observed in only one patient (1.4%). Conclusion: Three-dimensional conformal radiotherapy for the treatment of PVT from advanced HCC was a relatively effective and safe method.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.200-209
• /
• 2017

The aim of this study was to evaluate the shear bond strength (SBS) of three typical restorative materials - glass ionomer cement (GIC), resin-modified glass ionomer (RMGIC) and composite resin (CR) - to different pulp capping materials, i.e., Theracal $LC^{TM}$ (TLC), $Biodentine^{TM}$ (BD), and $ProRoot^{TM}$ white MTA (WMTA). 90 acrylic blocks with a center hole were prepared. The holes were completely filled with three pulp capping materials (TLC, BD, and WMTA), with 30 specimens per capping material. The samples were then randomly divided into 3 subgroups of 10 specimens each and were overlaid with GIC, RMGIC, or CR. A total 9 specimen groups were prepared. The SBS was assessed using a universal testing machine. Kruskal-Wallis test and Mann-Whitney's test were performed to compare the SBS among the subgroups (p < 0.05). After the SBS test, the fractured surfaces were examined under a stereomicroscope at a magnification of $25{\times}$. The highest and lowest SBS values were recorded for TLC-CR and TLC-GIC, respectively. With regard to the SBS to the three pulp capping materials, CR was found to be superior to RMGIC and GIC. BD showed a higher SBS compared to TLC and WMTA when used with GIC.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.163-173
• /
• 2005

The purpose of this study was to compare the asymmetric degree between maxillofacial hard and soft tissues in individuals with facial asymmetry. Computerized tomographies (CT) of 34 adults (17 male, 17 female) who had facial asymmetry were taken. The CT images were transmitted to personal computers and then reconstructed into three-dimensional (3D) images through the use of computer software. In order to evaluate the degree of facial asymmetry, 6 measurements were constructed as the hard tissue measurements while 6 counterpart measurements were taken as the soft tissue measurements. The means and standard deviations were obtained for each measurement using 3D measure, then t-test was used to investigate the differences between each hard tissue measurement and the corresponding soft tissue measurement All measurements used in the present study showed statistically significant differences between the hard and soft tissues. The degree of soft tissue asymmetry was smaller than that of corresponding hard tissue asymmetry in case of chin deviation, frontal ramal inclination difference, and frontal corpus inclination difference. On the other hand, the degree of soft tissue asymmetry was greater than that of underlying hard tissue asymmetry in the measurement of lip canting and lip cheilion height difference The present study suggests that asymmetric differences of hard and soft tissue is observed nu facial asymmetric subjects and thus soft tissue analysis is needed in addition to hard tissue analysis when making an evaluation of facial asymmetry.

• Journal of Life Science
• /
• v.14 no.3
• /
• pp.478-483
• /
• 2004

In a model reaction using lysyl oxidase purified partilally from bovine aorta, effect of L-ascorbic acid AsA on the oxidative reaction of lysine in collagen was investigated. Addition of Ash to the reaction mixture under aerobic conditions resulted in the decrease of enzymatic activity. In order to examine the specificity of AsA in the oxidative reaction of lysine, other reductants including A derivatives instead of AsA were added to the reaction mixture. Thiol such as glutathione had no effect on the activities of lysyl oxidase. on the other hand, it was observed that erythorbic acid, which was a stereoisomer of AsA, had the same inhibitory effect on this oxidative reaction as AsA. Moreover, by the addition of 3,4-dihydroxybenzoate, which was structural analog of AsA, the activities decreased in a similar manner to that of AsA. These results indicate that the regulatory effect of AsA on lysyl oxidase is attributed to characteristics of the structure. From the determination of Ash remained in the reaction mixture, it is shown that AsA concentration remarkably decreased by lysyl oxidase of the reaction mixture. It is hypothesized that endiol groups reduces the enzyme-bound $Cu^{+2}$ required for further progress of the reaction, and suggests that AsA regulates specifically the reduction of $Cu^{+2}$ required to oxidize lysyl oxidase. This findings support that AsA has an important regulatory role on the oxidative reaction of lysine and on changes of collagen cross-links with aging.

• Journal of Life Science
• /
• v.27 no.8
• /
• pp.965-973
• /
• 2017

Conjugated linoleic acid (CLA) is a group of positional and geometric isomers of linoleic acid with conjugated double bonds at C9,C11 and C10,C12 positions. Of possible CLA isomers, a naturally occurring CLA isomer is c9,t11-CLA which is produced from linoleic acid by linoleate isomerase from various rumen and lactic bacteria, and mushroom mycelia. Meanwhile, synthetically prepared CLA contained an equal amount of c9,t11-CLA and t10,c12-CLA isomers, and other isomers as minor constituents. CLA was firstly mentioned in 1939 during the elaidinization reaction of linoleic acid. Thereafter, CLA was not an attractant to scientists because it was not scientifically interested any more. However, since the anticarcinogenic action was driven from 7,12-dimethylbenz[a]anthracene (DMBA)-induced mouse skin carcinogenesis in 1987, CLA-related researches were drastically elevated, resulting in approximately 6,100 research papers in literature, so far. CLA exhibited the significant biological activities: anticarcinogenic, antidiabetic, antihypertensive, antiatherosclerotic, body-fat reducing, antioxidative, antiinflammatory, testosterone producing and other activities. Interestingly, two major CLA isomers, c9,t11-CLA and t10,c12-CLA, exhibited different biological activities. Meanwhile, t,t-CLA isomers which is minor constituent of chemically synthesized CLA from linoleic acid exhibited more potent anticarcinogenic activity in carcinogen-induced animal models and cancer cell lines than other CLA isomrs. In the present review, the significant biological activities of CLA were discussed along with historical studies of CLA since 1939.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1139-1149
• /
• 2017

Measuring tree's volume is very important input data of various environmental analysis modeling However, It's difficult to use economical and equipment to measure a fragmented small green space in the city. In addition, Trees are sensitive to seasons, so we need new and easier equipment and quantification methods for measuring trees than lidar for high frequency monitoring. In particular, the tree's size in a city affect management costs, ecosystem services, safety, and so need to be managed and informed on the individual tree-based. In this study, we aim to acquire image data with UAV(Unmanned Aerial Vehicle), which can be operated at low cost and frequently, and quickly and easily quantify a single tree using SfM-MVS(Structure from Motion-Multi View Stereo), and we evaluate the impact of reducing number of images on the point density of point clouds generated from SfM-MVS and the quantification of single trees. Also, We used the Watertight model to estimate the volume of a single tree and to shape it into a 3D structure and compare it with the quantification results of 3 different type of 3D models. The results of the analysis show that UAV, SfM-MVS and solid model can quantify and shape a single tree with low cost and high time resolution easily. This study is only for a single tree, Therefore, in order to apply it to a larger scale, it is necessary to follow up research to develop it, such as convergence with various spatial information data, improvement of quantification technique and flight plan for enlarging green space.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.175-179
• /
• 2016

Recent advances in technology of medical image have made surgical simulation that is helpful to diagnosis, operation plan, or education. Improving and enhancing the medical imaging have led to the availability of high definition images and three-dimensional (3D) visualization, it allows a better understanding in the surgical and educational field. The Real human field of view is stereoscopic. Therefore, with just 2D images, stereoscopic reconstruction process through the surgeon's head, is necessary. To reduce these process, 3D images have been used. 3D images enhanced 3D visualization, it provides significantly shorter time for surgeon for judgment in complex situations. Based on 3D image data set, virtual medical simulations, such as virtual endoscopy, surgical planning, and real-time interaction, have become possible. This article describes principles and recent applications of newer imaging techniques and special attention is directed towards medical 3D reconstruction techniques. Recent advances in technology of CT, MR and other imaging modalities has resulted in exciting new solutions and possibilities of shoulder imaging. Especially, three-dimensional (3D) images derived from medical devices provides advanced information. This presentation describes the principles and potential applications of 3D imaging techniques, simulation and printing in shoulder and elbow practice.

• Journal of The Korean Association For Science Education
• /
• v.35 no.5
• /
• pp.919-929
• /
• 2015

This study aims to develop a modeling-based learning program about geologic structures and to reveal the relationship between the argumentation patterns and levels of students' mental models. Participants included 126 second grade high school students in four sessions of modeling-based learning regarding continental drift, oceanic ridges, transform faults, and characteristics of faults. A modeling-based learning program was implemented in two classes of the experimental group, and teacher-centered traditional classes were carried out for the other students in the comparison group. Science achievement scores and the distribution of students' mental models in experimental and comparison groups were quantitatively compared. The video-taped transcripts of five teams' argumentation were qualitatively analyzed based on the analytic framework developed in the study. The analytic framework for coding students' argumentation in the modeling-based learning was composed of five components of TAP and the corresponding components containing alternative concepts. The results suggest that the frequencies of causal two-dimensional model and cubic model were high in the experimental group, while the frequencies of simple two-dimensional model and simple cross sectional model were high in the comparison group. The higher the frequency of claims, an argumentation pattern was proven successful, and the level of mental model was higher. After the rebuttal was suggested, students observed the model again and claimed again according to new data. Therefore, the model could be confirmed as having a positive impact on students' argumentation process.