• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.188-194
• /
• 1997

Wet gel with surface modification by TMCS was redispersed in EtOH and redispersed silica sol for coat-ing was prepared. After spin coating of redispersed sol was conducted on silicon substrate, processes of drying(8$0^{\circ}C$) and heat treatment(>25$0^{\circ}C$) were, followed at ambient pressure. The influence of heat treat-ment of properties of film was observed, changing temperature at heat treatment. The optimum redisp-ersion condition for stable silica sol was wet gel:EtOH=1g:110$m\ell$ and the concentration and viscosity of redispersed silica sol with average particle size of 30nm were 0.11 M, 2.0-2.2 cP respectively. Crack-free thin film with the refractive index of 1.14 and thickness of 400 nm was obtained through drying at 8$0^{\circ}C$ and subsequent heat treatment at 45$0^{\circ}C$ for 2 hrs respectively after spin coating of 1500rpm, 10 times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.15-15
• /
• 2010

$Na_2Ti_6O_{13}$ (NT)가 도핑된 $BaTiO_3-(Bi_{0.5}Na_{0.5})TiO_3$ BBNT) PTCR 세라믹스를 변형된 세라믹공정을 이용하여 제조하였다. 제조된 BBNT 세라믹의 미세구조와 PTCR 특성에 미치는 NT의 효과를 조사하였다. $1300^{\circ}C$에서 합성된 BBNT 세라믹은 NT의 도핑량이 증가함에 따라 비정상적으로 성장된 입자의 수가 증가하였다. 뿐만 아니라, NT의 도핑량 증가는 상온비저항을 약간 증가시켰지만 큐리온도 (Tc) 부근의 최대비저항/최소비저항으로 정의되는 PTC 점프 특성을 크게 향상시켰다. 특히, 0.01mol%의 NT 도핑 시 상온비저항은 $425\;\Omega{\cdot}cm$, PTC 점프는 ($2.02{\times}^10^5$) 저항온도계수는 69.8% 및 Tc는 $155^{\circ}C$의 우수한 결과를 나타내었다.

• Korean Journal Plant Pathology
• /
• v.12 no.2
• /
• pp.255-265
• /
• 1996

토양에 존재하는 진균인 Gliocladium virens는 식물병을 감소 또는 방제할 수 있는 생물학적인 특성에 의하여 G. virens는 지난 수십년간 실용가능성이 큰 생물학적 방제균(또는 길항균)으로 집중적으로 연구되었다. 이 균이 식물병의 발생을 감소시키는 생물적 방제효과는 항생작용, 중복기생, 근권에서의 생존과 집단번식, 뿌리표면에서의 정착 등에 의한 것으로 분류되고 있다. 특히, 항생물질인 gliotoxin, gliovirin, viridin 등은 Rhizoctonia solani 및/또는 Pythium spp. 등에 항생효과가 뚜렷하고, 식물병의 발생과 직접적인 상관관계를 나타내고 있어 G. virens의 식물병의 방제에 관련된 중요한 작용기작으로 제시되어 있다. 또한, 근권에서 이균의 생존과 집단증식 및 뿌리표면에서의 정착은 식물병의 방제와 상관관계를 나타낼 수 있는 중요한 작용기작으로 제시되고 있다. 그러나 이균이 R. solani 등에 기생하는 현상은 식물병의 생물적 방제의 직접적인 연관관계를 나타내고 있지 않다. G. virens을 이용의 생물적 방제효과를 증진시키기 위한 방법으로 다음과 같은 두 가지 방법을 들 수 있다. 첫째, 길항효과가 높은 G. virens 균주를 선발하기 위하여 여러 종류의 토양에서 길항력이 높은 G. virens의 선발이 지난 수십년간 진행되고 있다. 또한, 특정 길항효과를 발현하는 유전자를 G. virens의 염색체에 도입하고 이를 발현시킴으로써 생물적 방제효과를 증진시키는 것으로 이러한 방법은 1980년 후반부터 진행되고 있다. 둘째, G. virens의 길항효과가 최대의 효율로 발현될 수 있도록 최적의 미세환경을 갖추고 있으며 농민이 편리하게 사용할 수 있는 G. virens의 운송매체의 개발이 중요하다. 운송매체의 개발에 의한 'Glioguard'는 G. virens의 포자를 alginate 입자에 제형화한 것으로서 미국에서 시판되고 있다. Aldicarb, metalaxyl, atrazine 등의 농약을 분해할 수 있는 능력은 G. virens의 다른 생물적 특성중의 하나이다. 특히, parathion을 분해할 수 있는 Flavobacterium sp.의 유전자(opd)가 G. virens의 염색체에 도입되여 발현될 수 있는 방법이 제시되었으며, 이는 G. virens을 이용한 토양에서의 특정한 농약의 분해효율을 증진시킬수 있는 가능성을 제시한 것이다. 그러나, G. virens를 이용한 농약의 생물적 분해에 관한 연구는 기초단계로 평가되고 있으며, 포장에서 이를 실용화하기 위해서는 향후 지속적인 연구가 필요하다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.246-250
• /
• 2009

The Ni formation behavior from the reduction of NiO nano crystals in the $H_2/N_2$ gas mixtures. The NiO nano crystals were synthesized by heat-treating nickel nitrate$(Ni(NO_3)_2\cdot6H_O)$ in the air at $500^{\circ}C$, and had an octahedral shape and the particle size of 200~500 nm. The NiO nano-crystals had well-developed (111) planes which is hardly formed in normal synthetic conditions. The reduction process was carried out at 300 and $600^{\circ}C$ for 15 and 60 minutes, respectively. When the NiO nano-crystals were reduced at $300^{\circ}C$, the Ni particles sustained the same octahedral shape as NiO, while Ni particles were to agglomerate at $600^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.769-774
• /
• 2002

The powder mixture in which Fe-Ni alloy particles of 20 nm were homogeneously dispersed on $Al_2O_3$ particle surfaces was prepared by hydrogen reduction of $Al_2O_3$ and metal oxide powders. $Al_2O_3$/Fe-Ni nanocomposites fabricated by pressureless sintering were only composed of $Al_2O_3$ and ${gamma}$-Fe-Ni phases and achieved over 98% of the theoretical density at the sintering temperature above $1350^{\circ}C$. The highest strength and toughness of the composites were 574 MPa and 3.9 MP$a{\cdot}m1/2$, respectively. These values were about 20% higher than these of monolithic $Al_2O_3$ sintered at the same conditions. Nanocomposites showed ferromagnetic properties and coercive force was increased with decrease of the average particle size of dispersions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.181-184
• /
• 2003

GaN계 청색 여기용 광원으로 최적인 $Y_{3}AI_{5}O_{12}:Ce$계 phosphor를 고상반응으로 제조하여 white LED용 yellow 형광체로 신뢰성을 검토하였다. 출발시료는 metal hydrous oxide로 합성한 분말에 활성제로서 $Ce^{3+}$ 이온의 농도를 변화시키면서 로내의 온도와 시간을 변수로 하여 형광체를 제조하였다. 그 결과 $1650^{\circ}C$에서 2시간 소성시킨 분말의 경우, 입자 크기가 $3{\mu}m$이하인 순수 YAG 형광체를 얻을 수 있었으며 $Ce^{3+}$이온농도를 변화시킨 결과 0.03~0.05mol% 일 때가 가장 우수하여 해외제품수준을 능가하는 우수한 발광특성을 나타내었다. 이때 CIE1931 색좌표 값은 x=0.385, y=0.433으로서 green yellow 색을 나타내었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1175-1182
• /
• 2001

Chemical compositions of polydisperse SiO$_2$/TiO$_2$multicomponent aggregates were measured for different heights from the burner surface and different mobility diameters of aggregates. SiO$_2$/TiO$_2$multicomponent particles were generated in a hydrogen/oxygen coflow diffusion flame from two sets of precursors: TTIP(titanium tetraisopropoxide), TEOS(tetraethylorthosilicate). To maintain 1:1 mole ratio of TTIP:TEOS vapor, flow rate of carrier gas $N_2$was fixed at 0.6lpm for TTIP, at 0.1lpm for TEOS. In-situ sampling probe was used to supply particles into DMA(differential mobility analyzer) which was calibrated with using commercial DMA(TSI, model 3071A) and classifying monodisperse multicomponent particles. Classified monodisperse particles were collected with electrophoretic collector. The distributions of composition from particles to particle were determined using EDS(energy dispersive spectrometry) coupled with TEM(transmission electron microscope). The chemical(atomic) compositions of classified monodisperse particle were obtained for different heights; z=40mm, 60mm, 80mm. The results suggested that the chemical(atomic) composition of SiO$_2$decreased with the height from burner surface and the composition of SiO$_2$and TiO$_2$approached to the value of 1 to 1 fat downstream. It is also found that the composition of SiO$_2$decreases as the mobility diameter of aggregate increases.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.442-447
• /
• 2007

In order to improve the surface hardness of transparent plastic films, organic-inorganic hybrid coating solutions were synthesized by the sol-gel method. The coating solutions were prepared by adding GPTMS (glycidoxypropyl trimethoxysilane) to a colloidal silica (12 nm) suspension. PC(polycarbonate) substrates were dipped into the coating solutions and dried at room temperature for 10 min before being cured at $80^{\circ}C$ for 30 min. The effect of the solution pH and GPTMS content was investigated on the properties of coating films. The pencil hardness and adhesion to substrates of the coating films, prepared at acidic condition (pH 4), showed better properties than those at neutral or basic conditions. Also, the pencil hardness and adhesion to substrates of the coating films increased with increasing GPTMS content.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.386-390
• /
• 2007

In this study, polyurethane prepolymers were synthesized from polycaprolactonediol (PCDs. M.W. 530, 830, 1000, 1250, and 2000) and polycaprolactonetriol (PCTs. M.W. 300 and 900), and hexamethylenediisocyanate (HMDI). Polyurethane beads was prepared from the different prepolymers by a two-step suspension polymerization. The particle size of polyurethane beads was investigated by particle size analyzer. The beads were $10{\sim}30{\mu}m$ in size. The structure of beads was confirmed by FT-IR spectrometer. Their thermal properties were analyzed by TGA. Glass transition temperatures ($T_g$) of the beads were in the range of $-23{\sim}-53^{\circ}C$ and decreased with the increase of the PCD molecular weight. In order to prevention the cohesion of beads, the beads were coated with tetraethoxysilane (TEOS).

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.227-233
• /
• 2009

Recently, dye-sensitized solar cell (DSSC), one of the solar cells, has been widely investigated. Studies on DSSCs can be classified into 4 fields such as $TiO_2$ nanocrystalline materials, dyes, electrolytes and conductive plate. In this work, $TiO_2$ nanoparticles for dye adsorption were synthesized, and added into the photo-electrode paste with different phosphor types and contents. Then, the influence of phosphor additives on the conversion efficiency of DSSCs was investigated. It was found that the maximum conversion efficiency was 8.81% when 0.5% of YAG phospher having the particle size of 400 nm was used.