• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.305-306
• /
• 2007

ACP(Advanced Spent Fuel Conditioning Process)의 금속전환로에 $U_3O_8$을 공급하기 위하여 20 kgHM/batch의 $UO_2$ 펠릿(pellets)을 처리할 수 있는 건식분말화 장치가 개발되고있다. 건식분말화 장치는 500 $^{\circ}C$온도에서 공기를 공급하여 일정한 입도범위의 균질한 $U_3O_8$을 만든다. 이런 건식 분말화 장치의 효율을 높이기 위해서는 반웅로에 불어 넣어주는 공기의 유량을 증가시킬 필요가 있다. 하지만 공기와 반응하여 생성되는 $U_3O_8$ 입자는 그 크기가 최소 3 ${\mu}$m 정도로 매우 미세하여，반응로 출구를 통해 외부로 빠져나갈 가능성 이있다. 이를 방지하기 위해 분말화 장치 출구 바깥에는 필터가 설치되어 있으나 공기와 함께 $U_3O_8$ 입자가 계속해서 빠져 나갈 경우 입자로 인해 필터가 막혀 제 기능을 할 수 없게 된다. 따라서 건식 분말화 장치는 미세한 $U_3O_8$ 입자가 반응로 밖으로 빠져나가지 않도록 입구에서의 공기 유량을 일정 수준 이하로 조절해주는 것이 필요하다. 이 연구의 목적은 초기 유량으로부터 유량을 점점 증가시키면서 시간변화에 따른 입자 거동 특성을 해석하며， 결과로부터 주어진 크기의 타원입자에 대해 최대 허용 공기 유량을 결정하고자한다. 이 해석을 위해 유동과 입자를 동시에 해석할 수 있는 ANSYS-CFX 5.7.1과 ANSYS-CFX 10.0 두 가지의 소프트웨어가 사용되었다. 해석 결과를 바탕으로 좀더 정확한 유량 한계치 계산을 위해 추가로 수행되어야 할 해석에 대해 제안하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.1
• /
• pp.33-38
• /
• 2007

PVD (Prefabricated Vertical drain) consists of filter and core. An effective PVD has two basic filtration functions ; first to retain soil particle ; and second, to allow water to pass from the soil into the PVD core without clogging or blinding. Clogging which reduces the permeability of the geotextile filter jacket is caused by fine particles penetrating into the geotextile filter jacket in relatively low permeability soil conditions. As clogging performance increases gradually, excess pore water flow from soil is resisted and finally consolidation delays. Current soil-geotextile filter system criteria are generally based on relationships between a representative pore size of the geotextile and particle size of the soil. In Korea, PVD geotextile filter system criteria have been applied by only testing AOS (Apparent Opening Size) of filters without evaluating the filtration and clogging performance on soil-geotexile filter systems. Therefore, the filtration tests on soil-geotexile filter systems were conducted in order to evaluate the filtration and clogging performance with 3 kinds of geotextile filters. On these tests, we have applied geotextile filter system criteria on PVD in ${\bigcirc}{\bigcirc}$ sites.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.401-406
• /
• 2023

With the development of industry, fine dust is causing difficulties in various fields such as environment, health, and life, and a large amount of pollutants generated from human social activities are emerging as a serious environmental problem due to air pollution. Therefore, in this study, activated carbon was added to remove fine dust and volatile organic compounds by spinning cellulose acetate polymer fibers on a silicon support using the electrospinning method. By varying the activated carbon ratio and electrospinning time, the fine dust blocking effect and toluene adsorption performance were confirmed according to the activated carbon ratio and filter thickness. As a result, it was shown that the particles were effectively blocked with the increase in the electrospinning time due to the filter thickness increase. Adsorbed amount of toluene was increased with increase in activated carbon amount. Light transmittance was decrease with increase in electrospinning time, showing that there were light transmittance in filters electrospun for 20~30 minutes.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.479-480
• /
• 2003

미세 입자의 포집효율을 향상시키고 집진필터의 수명을 연장시키기 위해 여과집진 장치에 전기집진 기술을 접목시켜 미세 입자의 제어 성능을 향상시키기 위한 다단계 집진장치에 대해 많은 연구가 진행되어 왔다(Hautanen, 1996). 그 가운데 전기장 내에서의 입자 응집을 이용한 미세입자의 제거는 전기집진기의 효율을 높이기 위한 방법의 하나로 제시되었고(Lehtinen, 1996), 교류 전기장 내에서의 입자들의 충돌로 인하여 미세입자의 크기가 성장하여 전기 집진 장치에서 미세입자의 제거효율이 상승한다는 연구결과가 발표되었다(Watanabe, 19950. (중략)

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.61-67
• /
• 2018

Grouting is reinforcement or cutoff method which uses the hardening agent which is typically represented by portland cement and injected into the ground or the structure. When mixing the cement in powder form with water, the particles tend to cohere each other. Once they cohered, the particle size tends to become larger while injection efficiency becomes lower. This study, in a bid to reduce the cohesion of cement, the screen was set inside the grout mixer so that the cement particles are separated while vibrating them. To validate the effect of vibration screen, comparison test was conducted by using ordinary portland cement, slag cement and micro cement. Viscosity test, bleeding test and grain-size analysis indicated that the characteristics varied significantly after passing through the vibration filter. It is expected that the vibration filter installed inside the grout mixer will reduce the cement cohesion when mixing with water.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.6
• /
• pp.41-47
• /
• 2022

Permeable pavement technology allows the penetration of rainfall into the roadbed, thereby reducing surface runoff and enhancing water quality. The water quality can be improved by adding a filter layer to the permeable pavement. This study analyzes the permeability performance and particulate-matter removal efficiency of a bottom ash-silica sand filter. The performances of five filters with bottom ash and silica sand as the basic materials were evaluated on particulate matter sized 60 ㎛ or smaller. The pure silica sand sample and pure bottom ash sample delivered an average removal efficiency of around 70%. The removal efficiency of the mixed sample was approximately 90%, exceeding the recommended reduction rate (80%) at non-point pollution reduction facilities. In future work, the filter performance should be further verified on permeable pavement.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.56-60
• /
• 2018

There have been a lot of study to improve the performance of membrane filters as the removal of particulate matter has been of great interest due to the negative effects. Among the membrane fabrication techniques, the electrospinning technique is the most promising because it can produce uniform fibers ranging from nano to micrometer size. The electrospun membranes will greatly improve the filtration performance due to the high ratio of surface area to volume and the high porosity. In the present study, polystyrene (PS) and cellulose acetate (CA) polymers were used to produce the membranes with carbon nanotube (CNT), showing the filtration performances were improved with the optimal amounts of CNT.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.4
• /
• pp.487-493
• /
• 2012

SLAM(Simultaneous Localization And Mapping) is a technique used by robots and autonomous vehicles to build up a map within an unknown environment and estimate a place of robot. FastSLAM(A Factored Solution to the SLAM) is one of representative method of SLAM, which is based on particle filter and extended Kalman filter. However it is suffered from loss of particle diversity. In this paper, new approach using fitness sharing is proposed to supplement loss of particle diversity, compared and analyzed with existing methods.

• Journal of Korea Water Resources Association
• /
• v.54 no.6
• /
• pp.365-379
• /
• 2021

Hydrological model parameters are essential for model simulation and can vary over time due to topography, climatic conditions, climate change and human activity. Consequently, the use of fixed parameters can lead to inaccurate stream flow simulations. The aim of this study is to investigate an appropriate method of estimating time-varying parameters using stream flow observations, and how the simulation efficiency changes when stream flow data are assimilated into the model. The data assimilation method can be used to automatically estimate the parameters of a hydrological model by adapting to a variety of changing environments. Stream flow observations were assimilated into a two parameter monthly water balance model using a particle filter. The simulation results using the time-varying parameters by the data assimilation method were compared with the simulation results using the fixed parameters by the SCEM method. First, we conducted synthesis experiments based on various scenarios to investigate if the particle filter method can adequately track parameters that change over time. After that, it was applied to actual watersheds and compared with the predictive performance of stream flow when using parameters that change with time and fixed parameters. The conclusions obtained through this study are as follows: (1) The predictive performance of the overall monthly stream flow time series was similar between the particle filter method and the SCEM method. (2) The monthly runoff prediction performance in the period except the rainy season was better in the simulation by the periodically changing parameters using the data assimilation method. (3) Uncertainty in the observational data of stream flow used for assimilation played an important role in the predictive performance of the particle filter.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.202-203
• /
• 2003

디젤 엔진에서 발생되는 입자는 대기 오염의 주 오염원이 되고 있다. 따라서 이를 감소시키기 위해 필터(Diesel Particulate Filter :DPF)를 이용한 다양한 후처리 시스템이 개발되고 있다. DPF 시스템에서 가장 많이 사용하는 필터는 cordierite로 구성된 벌집 모양의 세라믹 필터이다. 그러나 이러한 타입의 필터는 여과시 압력강하가 높을 뿐 아니라 재생을 위한 고온 상태에서 낮은 열전도율로 crack이 일어나거나 melting이 있어 필터 자체의 파손의 위험이 있다. (중략)