• Title/Summary/Keyword: 입자성 중금속

Search Result 92, Processing Time 0.028 seconds

A Basic Study on the Effective Management for MSWI Fly Ash (II) - Effect of Leaching Parameter - (소각 비산재의 적정처리를 위한 기초연구(II) - 용출인자의 영향 -)

  • Kim, Jin-Beom;Lee, Woo-Keun;Shim, Yeong-Ju
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.22 no.7
    • /
    • pp.1357-1364
    • /
    • 2000
  • Our study was performed to evaluate the effect of leaching parameters including the physicochemical characteristics and the fractionated composition of heavy metals on the release of heavy metals in fly ash discharged from MSWI. Leaching parameters such as pH, CEC, particle size, and exchangeable fraction among the fractional composition classified by sequential extraction procedure are considered. The leaching rate of heavy metal released by KSLT method is largely dependent on the pH of fly ash. The effect of pH on the release of heavy metals is different from elements. It appears that the leaching rate of cadmium and copper decreases with increasing pH, while lead and zinc increases at the condition of neutral or strong alkali condition, which suggests that the leaching of heavy metals are limited by the solubility. It is found that the effect of CEC is similarly to that of pH, $D_{10}$ among the particle size of fly ash is negative correlated with the concentration of heavy metals leached by KSLT method. In the case of exchangeable fraction, the leaching rate of heavy metals is linearly correlated with the exchangeable fraction for the fly ash below 40 meq/l00g of CEC, but not related out of the range.

  • PDF

Characterization of Heavy Metals Including Mercury and Fine Particulate Emitted from a Circulating Fluidized Bed Power Plant Firing Anthracite Coals (무연탄 순환유동층 발전소로부터 배출되는 수은을 포함한 중금속 및 미세분진의 배출 특성)

  • Kim, Jeong-Hun;Yoo, Jong-Ik;Seo, Yong-Chil
    • Korean Chemical Engineering Research
    • /
    • v.48 no.2
    • /
    • pp.268-274
    • /
    • 2010
  • Emission of heavy metals as hazardous air pollutants has been focused with tightening regulatory limits due to their hazardousness. Measurements and characteristic investigations of heavy metals emitted from a commercial power plant burning anthracite coal have been carried out. The plant consists of a circulating fluidized bed combustor, a cyclone, a boiler and an electrostatic precipitator(ESP) in series. Dust and gaseous samples were collected to measure main heavy metals including gaseous mercury before ESP and at stack. Dust emissions as total particulate matter (TPM), PM-10 and PM-2.5 at inlet of ESP were very high with 23,274, 9,555 and $7,790mg/Sm^3$, respectively, as expected, which is much higher than those from pulverized coal power plants. However TPM at stack was less than $0.16mg/Sm^3$, due to high dust removal efficiency by ESP. Similarly heavy metals emission showed high collection efficiency across ESP. From particle size distribution and metal enrichment in sizes, several metal concentrations could be correlated with particle size showing more enrichment in smaller particles. Mercury unlike other solid metals behaved differently by emitting as gaseous state due to high volatility. Removal of mercury was quite less than other metals due to it's volatility, which was 68% only. Across ESP, speciation change of mercury from elemental to oxidized was clearly shown so that elemental mercury was half of total mercury at stack unlike other coal power plants which equipped wet a scrubber.

Behavior of heavy metals in the surface waters of the Lake Shihwa and its tributaries (시화호와 주변 하천 표층수중의 중금속 거동 특성)

  • Kim Kyung Tae;Lee Soo Hyung;Kim Eun Soo;Cho Sung Rok;Park Chung Kil
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.5 no.1
    • /
    • pp.51-67
    • /
    • 2002
  • In order to understand behaviors of heavy metals around the artificial Lake Shihwa in the vicinity of Kyunggi Bay in Korea in relation with huge environmental changes due to construction of huge artificial lake, water samples were collected from Lake Shihwa and its tributaries from 1996 to 1998 and analyzed. Due to extreme pollutant discharge from various kinds of anthropogenic sources such as the Banweol and Shihwa Industrial Complexes and cities, the Shihwa and its tributaries have been polluted in waters with various heavy metals. The enrichment factors of particulate heavy metals in water of streams and storm sewers were very high. All of the heavy metals observed in the waters showed relatively high temporal and spatial variations. In surface waters of the lake during the desalination after the dike establishment, spatial distributions of heavy metal concentrations were mainly controlled by various biogeochemical factors as well as input of industrial and municipal wastewaters, while, physical mixing was minor factor Pb and Co showed a strong affinity to particle phase, however the affinity to dissolved phase was dominated in Ni, Cu and Cd. Water quality of the artificial Lake Shihwa has been deteriorated by direct discharge of untreated wastewater and heavy metals have been accumulated in the lake system. Therefore, luther environmental improvement plan should be programmed subsequently.

  • PDF

Study on the Evaluation on Environmental Impact of Recycling of Recycled Aggregates (순환골재의 재활용이 환경에 미치는 영향 평가에 관한 연구)

  • Park, Je-Chul
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.9 no.2
    • /
    • pp.161-166
    • /
    • 2021
  • This study was on leaching test(KSLT) of the aggregate for the products to evaluate the characteristics of contaminants and the possibility of contamination arising from the aggregate. On the basis pH, conductivity, turbidity, TN, TP, COD and heavy metal contents in the aggregate increased as the particle size of the aggregate was smaller. The pH appeared to be 9.9~11.4 which is relatively higher than soil, however, heavy metal has investigated within the 1 region's standard value of soil pollution standards. From the leaching test, there is strong indication that the risk of pollution due to elution of pollutants gets higher with the smaller grain size. Especially conductivity and turbidity are the potential water pollution source and recycled aggregates of 10mm or less could be a potential pollution source since it could elute soluble matters and suspended solid, but there is no proper management standard for them. As a result of evaluating water pollution possibility of the aggregate, the pH displayed in items with a very high possibility of contamination, TN and TP did in item with a low possibility of contamination and on the other hand the heavy metals did in item with a very low possibility of contamination.

A study on Wastes Treatment by Plasma (Plasma를 이용한 폐기물처리기술)

  • Park, Hyeon-Seo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.120.1-120.1
    • /
    • 2014
  • 고온 plasma는 전자, 이온, 중성입자로 구성된 이온화된 기체로 국소열평형 상태의 구성입자가 수천도에서 수만도에 이르는 큰열용량을 갖는 불꽃형태를 이루고있다. 따라서 고온 plasma는 고온, 고열로 대상물질을 용융 또는 기화시켜 물질의 물리적상태를 변화시키는 열원역활을 하거나, 높은반응성을 갖는 입자들에 의한 화학반응을 촉진하는 반응촉매로 작용하여 고기능성 부품소재, 에너지 환경, 원자력, 항공우주,유가금속 재활용등의 분야에서 핵심적인 역활을 하고 있슴니다. 본 발표에서는 연구소에서 지금까지 국책과제로 수행되었던 고온 plasma을 유해폐기물(병원, 유독 액상폐기물, 군화공폐기물, 중금속 함유 폐기물, 폐 plastic 가스화 등)처리에 관한 전반적인기술을 소개하고져함.

  • PDF

Transport and management of diffuse pollutants using low impact development technologies applied to highly urbanized land uses (고도화 도시지역에 적용된 LID 기법의 비점오염물질 관리 및 이동)

  • Geronimo, F.K.F.;Choi, H.S.;Kim, L.H.
    • Journal of Wetlands Research
    • /
    • v.21 no.2
    • /
    • pp.173-180
    • /
    • 2019
  • This study was conducted to understand factors affecting TSS and heavy metals transport on the road, parking lot and roof. During storm events, heavy metals, which were mostly attached to TSS, were also transported when TSS was washed off in the road, parking lot and roof. This finding may be supported by the significant correlations between TSS load and total and soluble heavy metals load including Cr, Fe, Cu, and Pb (Pearson r value: 0.52 to 0.73; probability p value<0.01). Generation and transport of TSS and heavy metals were greater in the road and parking lot compared to the roof due to vehicular activities, slope and greater catchment areas of these sites. It was found that TSS transport during peak flows of storm events ranges from 65% to 75% implying that by controlling peak flows, TSS transportation to nearby water bodies may be decreased. Depending on the target TSS and heavy metal reduction, sizing of low impact development (LID) technologies and green infrastructures (GI) such as infiltration trench, tree box filter, and rain garden may be calculated. Future researchers were recommended to assess the limitations of the systems and determine the design considerations for these types of facilities.

Bioassessment of Heavy Metals, Nanoparticles, and Soils Contaminated with Metals using Various Bioassays (다양한 독성법을 이용한 중금속, 나노입자 및 금속오염 토양 평가)

  • Kong, In Chul;Shi, Yu Tal;Lee, Min Kyung;Kang, Il Mo
    • Economic and Environmental Geology
    • /
    • v.48 no.3
    • /
    • pp.261-271
    • /
    • 2015
  • Toxicity results of metals, nanoparticles (NPs), and soils contaminated with metals were introduced on this review. Following methods were used: seed germination, bioluminescence, enzyme activity, and mutation. In general, different sensitivities were observed, depending on types of bioassays and pollutants. Among tested seeds, sensitivities of Lactucus and Raphanus were greater than others. Of single metal exposure, effect by As(III) was greater than others, and high revertant mutation ratio (5.1) was observed at 1 mg/L arsenite, indicating high mutagenicity. No general pattern was observed on the effect of metal mixture, but synergistic effect was observed with seeds. In case of soils, no correlation was observed between total metal contents and toxicity. Toxicity of NPs was observed as follows: CuO > ZnO > NiO > $TiO_2$, $Fe_2O_3$, $Co_3O_4$. Especially, no considerable effects were observed by $TiO_2$, $Fe_2O_3$, and $Co_3O_4$ under tested concentration (max. 1,000 mg/L). The evaluation results of interactive toxic effects using various bioassays may comprise a useful tool for the bioassessment of various environmental pollutants.

Characterization of colloid/interface properties between clay and EAF dust (점토와 전기로 제강분진의 콜로이드/계면 특성 분석)

  • Lee, Jee-Young;Lee, Ki-Gang;Kim, Yoo-Taek;Kang, Seung-Gu;Kim, Jung-Hwan
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.16 no.2
    • /
    • pp.76-81
    • /
    • 2006
  • The leaching behavior of heavy metal ions with pH and colloid/interface property was analyzed by ICP and SEM. The heavy metals in EAF dust are 'amphoteric metal' and the heavy metal ions leached a little at pH 10. And the leaching concentrations of heavy metals at pH 12 were higher than the that at pH 8. The leaching concentrations of heavy metal ion were decreased with adding the clay to the EAF dust. Especially, the leaching concentrations of heavy metal ion were effectively decreased at pH 12. The observation of colloid/interface properties shows that the soluble silicon hydroxide from clay at pH 12 was precipitated at the surface of the heavy metal and clay particles. This silicon hydroxide precipitates were named the PSHP. The leaching concentrations of heavy metal ion were effectively decreased by the formation of PSHP when adding the clay to the EAF dust and controlling the pH of the slurry at 12.

Antimicrobial polyurethane film manufacturing complex Apatite, and the characteristics (아파타이트를 복합한 항균 폴리우레탄 필름제조 및 특성)

  • Kwon, Oh-Kyung;Kim, Seok-Hoon;Park, Sun-Hwa;Min, Byung-Gil
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.11a
    • /
    • pp.14-14
    • /
    • 2011
  • 폴리우레탄 필름을 이용하여 등산복, 스포츠 웨어, 보호복 등 많은 의복이 제조되고 있으며, 현재 폴리우레탄 필름에 항균성을 부여하여 메디컬 소재에 적용되고 있다. 항균성을 부여하는 물질은 제올라이트. 수산화아파타이트, 실리카 겔을 이용한 많은 무기 항균제가 사용되고 있다. 이들중 특히 수산화아파타이트는 생체친화력 및 이온교환 능력이 우수하여 인공뼈 또는 인공치아로 사용되고, 환경분야에서는 이온교환수지로 중금속 제거를 위하여 사용되기도 한다. 본 연구에서는 폴리우레탄 필름 내부의 비드 간극 및 크기를 제어하여 비드콘 구조를 가지는 폴리우레탄 필름을 제조하였고 수산화아파타이트에 다양한 조건으로 은이온을 흡착시켜 은의 최적 흡착 조건을 설정하고 은이 흡착된 수산화아파타이트의 입자를 제어하여 다양한 종류의 입자를 제조하고 입자별 항균성을 평가하였다. 최종적으로 개발된 비드콘 폴리우레탄 필름과 은담지 수산화아파타이트를 여러가지 조건으로 복합화하여 항균성을 가지는 아파타이트복합 폴리우레탄필름을 제조하고 개발된 필름의 항균성 및 그 특성을 분석하여 보았다.

  • PDF

Synthesis and Analysis of TiO$_2$ Particles Using an Electrically Heated Tube Furnace (전기가열 튜브로를 이용한 광촉매 TiO$_2$ 입자의 제조 및 촉매 특성 분석)

  • 현정은;배귀남;이태규
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.05b
    • /
    • pp.401-402
    • /
    • 2003
  • TiO$_2$는 광촉매로서 자외선이 조사되면 여기상태로 되어 광활성을 나타내므로, 휘발성 유기화합물(VOCs), 악취, 중금속 물질 등을 제어하는데 널리 사용되고 있다(Lee and Biswas, 1998). TiO$_2$는 기상 및 액상 등 여러 가지 방법으로 제조되고 있는데(Morooka et al., 1989), 본 연구에서는 기상 방법의 하나인 전기가열 튜브로를 이용하여 TiOs 입자를 제조하였다. 즉, TTIP(titanium isopropoxide, Ti[OCH($CH_3$)$_2$]$_4$)와 공기를 전기가열 튜브로의 d열원을 이용하여 반응시키는 방법을 사용하였다. TiO2의 광활성에 영향을 미치는 변수로는 전기로의 온도, TTIP의 초기 농도, carrier gas의 유량, 산화시키기 위한 산소의 양, 수분의 양 등이 있다. (중략)

  • PDF