• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.26-32
• /
• 2015

In this study, it is evaluated for fracture toughness to analyze crack resistance properties of particulate reinforced composite propellant. Fracture toughness test using WST specimen is conducted by temperature conditions from $50^{\circ}C$ to $-60^{\circ}C$. Evaluation method for fracture toughness calculated using an equation suggested by ASTM E399 with linear elastic fracture mechanics. From these result, splitting loads and stress intensity factors of propellant increase according to decrease of test temperature. Also, the strain fields of specimen surface using digital image correlation increase as temperature decreased from $50^{\circ}C$ to $-40^{\circ}C$, but it sharply decreases at $-60^{\circ}C$ because of brittle behavior.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.653-662
• /
• 2010

This study investigates the effect of particle size on the detergency of particulate soil using an $\alpha-Fe_2O_3$ particle as the model. Monodispersed spherical $\alpha-Fe_2O_3$ particles were prepared by the hydrothermal aging of an acidic $FeCl_3$ and HCl solution. The $\xi$-potential of PET fiber was measured by the streaming potential method. The potential energy of interaction between the particle and fiber was calculated using the heterocoagulation theory for a sphere-plate model. The $\xi$-potential of PET fiber and potential energy of interaction between particles and fiber increased with a decreasing particle size in a DBS solution. However, in the nonionic surfactant solution, the $\xi$-potential signs of PET fiber and $\alpha-Fe_2O_3$ particles were (-) and (+), respectively; there was no repulsive power between the particles and substrate. The adhesion of particles to the fabric increased with increasing particle size in the anionic surfactant solution and their removal from the fabric increased with a decreasing particle size. The adhesion of particles to the fabric and their removal from the fabric was biphasic with a maximum and minimum at 0.1% concentration of the surfactant solution. In the nonionic surfactant solution the adhesion of particles to fabric and their removal from the fabric were greater than the ones in the anionic surfactant DBS solution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.130-141
• /
• 1997

Work on the reduction of particulate matter(PM) from a diesel vehicl has led to a new trp system and a control method to control the combustion rate of the PM filtrated in the trap, which was named as 'Active Exhaust Feeding Regeneration(AEFR) System' by its operation mechanism. Ceramic cordierite filter is a major component of the trap and susceptible to thermal shock. Therefore the system should be designed to reduce the peak temperature and temperature gradients in the trap ; these have been considered to be the main factors causing thermal shock of the filter during the regeneration. It uses the engine's exhaust gas partially for the regeneration of the ceramic filter. It controlled bypass flow rate of the engine's exhaust gas precisely to control the temperature of the gas entrained into the filter. Gas temperatures were measured inside filter, and the oxygen concentration at the outlet of the filter was also monitored during the regeneration to analyze the combustion process of the PM. The temperature distributions and temperature gradients in the filter during the regeneration varied widely according to the regeneration control schemes. Finally, this system shows relatively low peak temperature and temperature gradients in the filter during its regeneration. It is considered that this system uses a mew method to control the combustion rate of the PM, which is different from the methods used in the previous studies.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.153-170
• /
• 1996

Photosynthetic pigments and their degradation products in suspended and sinking particles collected from the Gulf of Mexico waters 1987~88, were measured using High Performance liquid Chromatography (HPIC). The short term variations in flux rates of chlorophylls and carotenoids as well as-their degradation products were compared at the mesoscale cyclonic and anticyclonic circulation features (cold joie rink and warm core ring). Chlorophyll a was the predominant porphyrin of suspended particulate matter at both CCR -and WCR. Among carotenoid pigments, 19'-hexanoyloxyfucoxanthin, which is a biomarker of prymnesiophytes, was dominant pigment at both rinds. Phaeophorbide a, which is produced through the Brazing processes of grazers, was the predominant degraded pigment in sinking particles ai the study aiea. Total pigment flux in CCR was an order of magnitude higher than that in WCR. Less than l% of the standing stock of the pigments measured sank out of the upper 200m of the WCR on any given day. Thus, suspended particulate matter in Gulf of Medico was not recycled rapidly.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.4
• /
• pp.48-56
• /
• 2002

It was peformed to estimate the sensitivity analyses and mass balance for tributyltin in Masan Bay, using the model builded by stella program. The results of the sensitivity analysis for dissolved tributyltin and tributyltin in the particulate organic carbon showed that not only organic carbon partition coefficient but also settling rate is important. In the case of tributyltin in phytoplankton, bioconcentration factor of phytoplankton is most important. The results of the mass balance showed that standing stocks of tributyltin in water, in phytoplankton and in particulate organic carbon are 3.29×10⁴g, 1.16×10²g and 3.17×10³g, respectively. In the case of flux, partition to particulate organic carbon showed most high value, 1.64×10³g/4ay, and next were deposition to sediment, 1.64×10³g/day and transportation to open sea by tide, 1.64×10³g/day.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.56-60
• /
• 2018

There have been a lot of study to improve the performance of membrane filters as the removal of particulate matter has been of great interest due to the negative effects. Among the membrane fabrication techniques, the electrospinning technique is the most promising because it can produce uniform fibers ranging from nano to micrometer size. The electrospun membranes will greatly improve the filtration performance due to the high ratio of surface area to volume and the high porosity. In the present study, polystyrene (PS) and cellulose acetate (CA) polymers were used to produce the membranes with carbon nanotube (CNT), showing the filtration performances were improved with the optimal amounts of CNT.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.203-212
• /
• 2019

Disposal nonconformity of radioactive wastes refers to radioactive wastes that need to be treated, solidified and packaged during operation or decommissioning of NPPs, and are typically exemplified by particulate radioactive wastes with dispersion characteristics. These wastes include the dried powders of concentrated wastes generated in the process of operating NPPs, slurry and sludge, various powdered wastes generated in the decommissioning process (crushed concrete, decontamination sludge, etc.), and fine radioactive soil, which is not easy to decontaminate. As these particulate wastes must be packaged so that they become non-dispersive, they are solidified with solidification agents such as cement and polymer. If they are treated using existing solidification methods, however, the volume of the final wastes will increase. This drawback may increase the disposal cost and reduce the acceptability of disposal sites. Accordingly, to solve these problems, this study investigates the pelletization of particulate radioactive wastes in order to reduce final waste volume.

• Journal of The Korean Association For Science Education
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2006

Students have often experienced difficulties in understanding the concept of the particulate nature of matter despite its importance in chemistry. Although various instructional methods have been suggested for teaching this concept, systematic studies have been rarely conducted. Therefore, this study investigated the effects of drawing and analyzing pictures. Three classes of 7th graders at a coed middle school in Seoul were assigned to the control group, the drawing group, and the analyzing group, respectively. Students were taught about the three states of matter and the motion of molecules for 8 class periods. The instructional effects on student conception, achievement, and science learning motivation were investigated by student visual learning styles. Results revealed that the scores of a conceptions test and a science learning motivation test for both the drawing group and the analyzing group were higher than those for the control group. Additionally, the scores of the science learning motivation test were also found to be higher for students with a more visual learning style than their counterparts.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.177-184
• /
• 2008

The purpose of this study was to compare the performance characteristics of Andersen and total suspended particulate (TSP) samplers in terms of particle size distribution (PSD) and mass sampling efficiency. In the present study, two Andersen and four TSP samplers were selected and tested to quantitatively estimate human exposure to fly ash representing industrial particulate matter (PM) in a carefully controlled chamber. The PSD characteristics, a mass median aerodynamic diameter and a geometric standard deviation, were found from the sampled PM of airborne samplers in the chamber. An Andersen sampler was compared with a TSP sampler quantified by a coulter counter multisizer, as a reference sampler, to describe the correlation of mass sampling efficiencies between two types of samplers. Overall results indicate that Andersen samplers overestimated small PM due to particle bounce phenomena between impaction stages. There was reasonably good correlation ($R^2$ = 0.89 and 0.91) between the mass sampling efficiencies of Andersen and TSP samplers during the two tests. However, the lower values of slope (0.71 and 0.72) in two tests showed that the Andersen sampler underestimated PM (> AD $10.1\;{\mu}m$) with sufficient inertia due to a relatively lower Andersen inlet velocity at 0.8 m/s comparing with the operating air velocity at 2.1 m/s in the sampling zone of a chamber.

• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.114-123
• /
• 1998

Particulate matters(less than 10 $\mu$m, PM10) at Kanghwa and Yangyang, which are located in the western and the eastern coastal regions in Korea, were measured in using low volume air sampler from December 1995 to November 1996, and their characteristics were investigated from the view point of background level.(and in order to characterize the particulate matters.) The particulate matters were analyzed for major water soluble ionic components(SO$_{4}^{2-}$, NO$_{3}^{-}$, Cl$^{-}$, Na$^{+}$, NH$_{4}^{+}$, K$^{+}$, Mg$^{2+}$ and Ca$^{2+}$) by ion chromatography. Mass concentrations of particulate matters were $48.77 \pm 22.45 \mug/m^{3}$ at Kanghwa and $54.04 \pm 32.98 \mug/m^{3}$ at Yangyang and SO$_{4}^{2-}$, NO$_{3}^{-}$ and NH$_{4}^{+}$ contributed largely to water soluble ionic components. nss(non sea salt)-SO$_{4}^{2-}$, contributed more than 95 percentage to SO$_{4}^{2-}$ and nss-K$^{+}$ and nss-Ca$^{2+}$ also contributed high percentages to K$^{+}$ and Ca$^{2+}$. It was supposed that most SO$_{4}^{2-}$, was originated from anthropogenic sources, and K$^{+}$ and Ca$^{+}$ were mainty originated from soil. The results of factor analysis suggested possibility of interpreting the correlation between air pollutants and regional characteristics.