• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.143-150
• /
• 2003

Based on the eigenfunction expansion method, the interaction between monochromatic waves and a partially immersed slotted plate with a back wall has been investigated. Analytical results show that the reflection coefficients by a partially immersed slotted plate depend on the porosity, immersed depth, chamber width, incidence angle and wave frequency. It is found that the reflection coefficient has minimum value within entire frequency range when the porosity has optimal value 0.1. Comparison between the analytical results and the experimental results(Zhu,2001) of reflection coefficients is made for various chamber widths, immersed depths and wave periods with good agreement. The present analytic method can account adequately for energy dissipation caused by flow separation behind a slotted plate and provide the design informations for the construction of slit caisson breakwater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.378-391
• /
• 1999

When the time-harmonic plane wave is incident upon a high-contrast spherical cavity in a lossy medium, the incoherent shadow intensity pattern is acquired by averaging out the multi-frequency intensities of the co-polarized total electric field calculated at the measurement plane perpendicular to the propagating direction of the incident wave in the forward direction. In the spherical rotational measurement configuration, an incoherent imaging of the spherical cavity is obtained via the back-projections of the incoherent shadow intensity pattern. This imaging method is validated by imaging an air sphere in the lossy medium of ${\epsilon}_r$ = 2 and $\sigma$ = 0.001, 0.003 S/m and the conditions for obtaining better images are investigated.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.27-31
• /
• 2002

We design a 1$\times$4 optical splitter made of photonic crystal waveguides and analyze the properties of the optical splitter using the finite-difference time-domain method with perfectly-matched-layer absorbing boundaries. The photonic crystal is constructed from cylindrical rods in air on a square lattice. Our simulation results show that there are different transmission properties for four bend geometries and different incident-wave frequencies. The sum of the power transmission of the splitted light is over 93 percent at a certain geometry and frequency, and the incident power splits in the four arms with almost the same ratio.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.759-768
• /
• 2019

The extended Tanimoto formula has been widely used to estimate the stability for the toe protection of the composite structure. However, the extended Tanimoto formula usually over-estimates armor weight when the incident waves approach the structure obliquely because the formula incident originally considered the normally incident wave cases. In this study, three-dimensional hydraulic model experiments were conducted to investigate the horizontal wave velocity under monochromatic and random wave conditions to investigate the prediction capability of the extended Tanimoto formula under the different incident wave angle conditions. The maximum horizontal wave velocity was measured near the toe for the normally incident wave condition. In the case of obliquely incident waves, the maximum horizontal wave velocity was measured under the stem wave generation condition. The results of the experiments showed a good agreement with the results by Takahashi et al.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.221-229
• /
• 2013

To find the influence of incident angle of wave on the moment of 3 storied steel moment resisting frame which is placed on the concrete rectangular pontoon, the fluid dynamic analysis is carried out, varying the period of wave from 5 to 15 second by 2 seconds. As increasing incident angle of wave to longitudinal axis, the influence of RAO-rolling is increased. The moment of longitudinal frame is increased apparently by the wave pressure when the incident angle is $0^{\circ}$. And the moment of the frame due to the wave pressure is decreased as the incident angle is increased. But the moment of frame due to acceleration caused from pitching and rolling is increased. It is shown that the increased moment when incident angle is $90^{\circ}$ is much greater than that of incident angle $0^{\circ}$.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.10a
• /
• pp.258-261
• /
• 1987

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.1099-1104
• /
• 2002

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.468-473
• /
• 2004

본 연구에서는 기존의 ㅡ자형, ㄴ자형, ㄷ자형 조파시스템이 경사진 방향으로 가동될 때 발생되는 에너지의 불연속성으로 인한 회절철상이나 구조물에서 반사된 파가 조파판에서 발생하는 재 반사 철상의 단점을 보완할 수 있도록 곡선형태의 조파판을 배치하여 수치실험을 행하였다. 조파판을 곡선형으로 배치시켜 실험 대상물에서부터 반사된 파가 가능한 조파판에 직각으로 부딪치도록 유도하였다. 편미분 격자생성기법을 도입하여 구성된 곡선형 격자망에서 Copeland(1985)의 완경사 방정식을 이용하여 수치해석 하였다. 우선, 1차원 실험영역에서 파를 생성하여 대상구조물에서 반사되어 돌아온 반사파 성분을 조파판에서 흡수하면서 입사파를 생성하는 현상을 재현하였다. 그 후, 실험영역을 2차원으로 확장시켜 조파판을 곡선형으로 배치하여 수치 실험하여 진행파와 회절파의 중첩으로 고안된 해석해와 수치 해를 비교하려다. 그 결과, 기존의 조파시스템에 비하여 에너지 불연속선에서의 회절 현상도 발생하지 않고 반사파 성분을 효율적으로 흡수하는데 효과적임을 알아냈다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.526-526
• /
• 2016

고립파는 다른 파들과는 달리 파고만 주어지면 파형이 결정되고 변형 없이 장거리를 전파시켜 처오름높이를 가장 잘 재현할 수 있기 때문에 지진해일의 많은 연구에서 입사파로 사용되어 왔다. 본 연구에서는 한양대학교 수리학 및 해안공학 연구실에서 보유중인 서보-피스톤 타입 조파기로 고립파를 발생시켜 2차원 조파수조 내부에 설치되어있는 동해안 경사모형에서 각 수심 및 상대파고에 따른 고립파의 처오름높이 측정실험을 수행하였다. 다수의 파고계를 이용하여 각 구역에서 수심 및 상대파고에 따른 고립파의 파형을 측정하였고, 경사면에서 처오름높이 분포의 최대와 최소, 평균값을 측정하였다. 측정된 실험결과를 바탕으로 동해안에서의 고립파 처오름높이에 대해서 서술하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.84-87
• /
• 1998

본 연구에서는 음향학에서 음파를 제어하는데 주로 이용되는 헤름홀츠 공명장치의 원리를 방파제에 응용하였다. 외해에서 발생된 입사파는 Fig.1에 보여진 입구를 가진 공명 구조물(Resonant Structure)을 만나면 에너지 일부는 입구를 통하여 방사(Radiate)되며 또 일부 에너지는 입구를 통하여 공명 구조물 안으로 방사된다. 공명 구조물 안으로 들어온 파의 주파수와 공명 구조물의 고유 주파수(Natural Frequency)들 중 첫 번째 공진 모드(Resonance Mode)의 주파수가 일치되면 구조물 내부에서의 파는 크게 증폭된다. (중략)