• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.157-160
• /
• 1998

본 논문에서는 동영상으로부터 에지 정보와 형판 변형을 통해 얼굴의 추출하고 그 특징을 기반으로 하는 추적 기법을 제안한다. 본 논문에서 제안하는 추적기법은 추출된 특징에 기반을 추적 지법으로 초기에 모자익 영상을 이용하여 얼굴 부분을 찾고 찾아진 얼굴 부분에 에지 연산자를 적용하여 에지를 추출한다. 에지 영상이 얻어지면 에지 영상에서 영역의 크기와 모양, 그리고 관계 검증을 통해 대략적인 눈 영역을 추출한다. 눈 영역이 찾아지면 이를 바탕으로 입 영역에 대한 후보 영역에 대하여 이진화를 수행하고 히스토그램 프로젝션을 통해 대략적인 입 영역을 추출한다. 추출된 눈 영역과 입 영역에 각각의 형판을 사용해 형판 변형을 하고 초기 매개변수를 추출한다. 추출된 매개변수는 다음 프레임에서 형판의 초기 값으로 사용된다. 그리고 나서 형판에 대하여 변형(deformation) 과정을 수행한다. 이 과정을 반복함으로써 추적 과정을 수행한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.655-658
• /
• 2009

본 논문에서는 저전력 모바일 IP 스토리지를 위한 재구성 가능 선반입 버퍼 기반의 WLAN 전력제어 기법을 제안한다. 제안된 기법은 주어진 모바일 IP 스토리지에 있는 멀티미디어 컨텐츠의 품질에 따라 선반입 버퍼의 크기를 자동적으로 결정하고 멀티미디어 컨텐츠가 실행되는 동안 On-Off 동작을 기반으로 WLAN 전력을 동적으로 제어한다. 제안된 기법을 PXA270 기반 모바일 단말, 임베디드 리눅스 2.6.11, 인텔 iSCSI 참조 코드, 그리고 Cisco Aironet 350 PCMCIA WLAN 카드를 사용하여 구현하고 성능을 평가한 결과 모바일 단말의 소모전력이 1.5배 이상 개선됨을 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.169-173
• /
• 2004

We have synthesized monodispersed $\alpha$-F $e_2$ $O_3$ nano particles to investigate the spin change during the Morin transition temperature( $T_{M}$). The particle size was founded to have a very uniform distribution of 80 nm by x-ray diffraction and size dispersion analyzer. The Mossbauer spectra between the 4.2 K and the room temperature show that $T_{M}$ was shifted and the spin states of Fe ion were changed with the particle size. The Morin transition temperature of bulk usually quoted in literature is 265 K but, it decreases with the size and no transition was found at the critical size down to 4.2K. The spin direction of 80 nm sized particles are normal to the hexagonal c-axis above the $T_{M}$ and are tilted about 28～29$^{\circ}$ below $T_{M}$, which is the [110] direction of rombohedral structure.

• The Korean Journal of Quaternary Research
• /
• v.10 no.1
• /
• pp.27-52
• /
• 1996

금강 퇴적물의 지화학적 특성을 파악하기 위하여 상류에서 하류까지 21개의 표층 퇴적물을 채취하고 총금속(Al, Fe, Mn, Cr, Co, Ni, Cu, Zn, Pb) 입도별 금속 및 존재형태별 금속을 분석하였다. 또한 하천에서 연안역까지 미량금속의 공간적 변화를 보기 위해 부유물 을 일정 간격으로 채취하여 미량금속을 분석하였다. 퇴적물 중 미량 금속 함량을 평균 입도 와 밀접히 관계하여 변화하며 세립질실트 이하 부분에서 가장높은 함량을 보였고 이 높은 함량은 하천 부유물 중 금속 함량과 Mn을 제외하고 거의 유사한 수준이었다. Pb은 조립질 모래에서도 높은 함량을 보이는데 이는 조립질 모래에 많이 포함된 정장석에 의한 영향이 되고 세립질 실트에서의 높은 금속 함량은 세립한 중광물에 의한 영향이다. Mn과 Pb을 제 안한 금속들은 퇴적물 중 주로(70% 이상) 결정 격자와 관계하여 존재하는데 이는 퇴적물의 주구성 입도가 조립하여 금속이 풍부하고 세립한 중광 물에 의한 영향이 크기 때문이다. 하 천에서 염하구로 금속 함량이 급격히 감소하는데 이는 용존 $Mn^{+2}$이온이 $MnO_2$로 변화하는 산화반응과 하천구역에서의 퇴적 그리고 염하구에서 금속이 적어 진 입자(염하구 내에서 유기물 분해/용해로 만들어지거나 재부유 작요에 의한 조립질 물질) 와 하천 부유물과의 혼합작용에 의해 이루어진다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.761-770
• /
• 2014

In september 2004 and 2006, topographical and sedimentological survey were carried out using multibeam echosounder, which were to investigate shape characteristics, temporal changes and control factors of the subaqueous dunes in the southern Gyeonggi Bay. The present tidal current and sedimentary characteristics of study area make conditions that the sizes (length and height) of large subaqueous dunes are developed and maintained sufficiently. The change of sedimentary characteristics over time, the decrease in grain size causes reduction in the height of very large subaqueous dunes. Therefore it shows that the grain size of surface sediments is a primary control factor in defining subaqueous dune sizes in the study area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.73-76
• /
• 2013

This paper proposes a tongue and its direction recognition algorithm which compares and estimates pixel distribution in the mouth area. As the size of smart phones grows, facial gesture control technology for a smart phone is required. Firstly, the nose area is detected and the mouth area is detected based on the ratio of the nose to mouth. After detecting the mouth area, it is divided by a pattern of grid and the distribution of pixels having the similar color to the tongue is tested for each segment. The recognition rate was nearly 80% in the experiments performed with five researchers among our laboratory members.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.105-121
• /
• 2004

The purpose of this study is to investigate the relationship between petrographical and engineering properties of granitic rocks, widely used as building and ornamental stones in Korea, at the Namwon are a. This area is one of the most famous area as a domestic dimension stone production. The granitic rocks were examined for grain sizes, modal compositions and then same samples were tested to determine specific gravity, water absorption, porosity, uniaxial compressive strength, tensile strength, abrasive hardness, P-wave velocity, modulus of elasticity and Poisson's ratio. It is suggested that the influence of the grain size on the engineering properties is more important than that of the mode of mineralogical compositions. And quartz contents also significantly influence the engineering properties of granitic rocks.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.46-53
• /
• 2005

This paper describes the mean grain size and shear strength properties related to subsidence characteristics using sediment samples and acoustic images obtained from artificial reef areas in Tongyoung and Jangsungpo offshore. The acoustic images collected from chirp sonar and side scan sonar show well the attitude/orientation, the distribution pattern, and the degree of subsidence of artificial reefs, suggesting the possibility of suitable site investigation and the management of the reefs using acoustic sonar. The sediments were largely composed of clayey silt and silty clay. The mean grain sizes in Tongyoung and Jangsungpo offshore show the ranges of 5${\sim}$9${\Phi}$ and 8${\sim}$9${\Phi}$, respectively. The shear strength was significantly increased at the depths of 20cm in Tongyoung offshore and 80cm in Jangsungpo offshore, corresponding to the subsidence depth of artificial reefs. The relationship between mean grain size and shear strength did not show a correlation, suggesting the shear strength does not totally depend on mean grain size. Provided subsidence characteristics with respect to various artificial reefs and seabed condition are investigated in more details, the constructing area of the reef can be more extended.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2015

This study were conducted the particle-size analysis on 57 blue pigments to understand the step distribution characteristics of blue pigments made out of Azurite by using Malvern's Mastersizer 2000. As the result, most of the conventional blue pigments in Korea, Japan, and Chinese showed good granularity step separation except for few, and the smaller the particle, the more the Span value increased and the wider the granularity distribution range. On the basis of Friedman and Sanders's Grain size, most of the pigments were sand size to silt size. 72.2% of B-100 was clay size and 2.5% of A-14 was gravel size. Even the same components can differ by the grain size directly affecting the important property such as color formation, oil absorption, specific gravity, usability, etc. so the information about the granularity distribution would be used for basic data to deal with natural pigments.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.3-12
• /
• 2006

The behavior of concrete structures subject to fire is complex, depending on many factors. The factors usually considered in research include the level and endurance of temperatures in concrete and reinforcing bars, the mechanical properties of the steel and concrete, moisture contents, cover thickness, existence of eccentricity, and member geometry among others. Although there are a few sophisticated numerical models which can trace the effects of these important parameters on the residual capacity of reinforced concrete columns damaged by fire, practical predictive formulas are in need for rapid yet reasonable assessment in practice. The practical formulas are developed in this study for fire-damaged normal strength reinforced concrete square columns, which can approximate the predictions of those sophisticated numerical models with ease in use. The formulas take into account the effects of exposure time to fire, concrete strength, reinforcement ratio and sectional area. The developed formulas are seen to correlate with the predictions of numerical model in a reasonable agreement. Some examples are also presented in determining the residual strength, safety and additionally needed strengths for a fire-damaged reinforced concrete column.