• Title/Summary/Keyword: 입도 제어

Search Result 368, Processing Time 0.029 seconds

Preliminary Study for Risk Assessment Estimation of Urban Underground Connect Section Using VISSIM : Comparison of Characteristics Based on Diverge/Merge (VISSIM을 활용한 도심 지하도로 연결로 위험도 산정을 위한 기초연구 : 분·합류부 기준 특성 비교)

  • Park, Sang Hyun;Lee, Jin Kak;Yang, Choong Heon;Kim, Jin Guk
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.20 no.5
    • /
    • pp.59-74
    • /
    • 2021
  • The domestic road space is reaching the limit of planar space distribution, and Increasingly, the importance of three-dimensional space distribution through the development of underground space. therefore, In this study, a study was conducted on a traffic control method that can safely induce two different traffic flows in the connection between the ground road and the underground road. Through VISSIM, we calculated the appropriate amount of outflow and inflow traffic compared to the capacity of the main line when there is a Merge/Diverge section in the underground road. and Through the analysis of the number of conflicts, the appropriate traffic control level for safety in the underground, A basic study was conducted on the level of risk in the underpass according to the level of delay in the ground part through the analysis of the delay scenario of the ground road.

Preparation of Monodisperse PEGDA Microparticles Using a Dispensing Needle Based Microfluidic Device (주사기 바늘 기반의 미세유체 장치를 이용한 단분산성 PEGDA 입자의 제조)

  • Jin, Si Hyung;Kim, Taewan;Oh, Dongseok;Kang, Kyoung-Ku;Lee, Chang-Soo
    • Korean Chemical Engineering Research
    • /
    • v.57 no.1
    • /
    • pp.58-64
    • /
    • 2019
  • This study presents a novel method for preparing monodisperse polyethylene glycol diacrylate (PEGDA) microparticles in a dispensing needle based microfluidic device. The microfluidic devices are manufactured by manually assembling various off-the-shelf products without using additional equipment. In this microfluidic device, the volumetric flow rates of the dispersed phase of PEGDA solution and the continuous phase of oil are controlled to generate monodisperse PEGDA droplets. The PEGDA droplet contains photo-initiator thus it is crosslinked to microparticle by photopolymerization at the ends of the device. The particle size is easily controlled by adjusting the volume flow rate and the size of the microfluidic device. The monodispersity of the particles is calculated by a coefficient of variation of 2.57%. To demonstrate the biological applications of PEGDA particles, cells are encapsulated and observed for proliferation and viability.

Sand Capping for Controlling Phosphorus Release from Lake Sediments (호소 저니의 인 용출 제어를 위한 모래 캡핑)

  • Kim, Geonha;Jeong, Woohyeok;Choe, Seunghee
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.1B
    • /
    • pp.125-130
    • /
    • 2006
  • In this research, possibility of sand capping was experimentally evaluated to control phosphorus release from lake sediment into water body. Three acrylic columns without and with 40 and 80 mm of sand capping were prepared. Phosphorus concentrations of overlying water in these columns were measured. Performances of sand capping were evaluated for 0, 40, and 80 mm of capping thickness by measuring DO, ORP, TP, and $PO_4$-P. For the case without capping, the releasing rate of total phosphorus was higher and dissolved oxygen decreased faster, comparing with those of columns with capping. Total phosphorus concentrations in overlying water were inversely proportional to capping thickness, while phosphate concentration showed no significant differences between both cases. The experiment results suggested that sand capping is effective to retard total phosphorus release from sediment.

Heterogeneous nucleations in the polyol process for the preparation of fine cobalt particles (미립 코발트분말 합성을 위한 polyol공정에서 비균질계 핵생성 반응)

  • 김동진;정헌생;우상덕;이재장;안종관
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.12 no.2
    • /
    • pp.73-79
    • /
    • 2002
  • The polyol process which applies to cobalt, nickel. copper and precious metals is a interesting and unexpected example of such a method for preparing uniform metal powders. The reaction proceeds via dissolution, and the polyol acts simultaneously as a solvent, a reducing agent, and to some extent a protective agent. Submicrometer uniform cobalt particles can be obtained by seeding the reactive medium ($AgNO_3$) to achieve a complete substitution of homogeneous by heterogeneous nucleation. By varying the number of nuclei it is possible to control to some extent the average particle size in the submicrometer (0.5$\mu$m) range.

Preparation and Characterization of Rosiglitazone-loaded PLGA Nanoparticles (Rosiglitazone약물을 함유한 PLGA 나노입자 제조 및 분석)

  • Shin, Ko-Eun;Huh, Kang-Moo;Lee, Yong-Kyu
    • KSBB Journal
    • /
    • v.23 no.5
    • /
    • pp.408-412
    • /
    • 2008
  • The rosiglitazone loaded poly (lactide-co-glycolide) (PLGA) nanoparticles (NPs) were prepared by the emulsion-evaporation method and optimized for particle size and entrapment efficiency. The optimized particles were 140-180 nm in size with narrow size distribution and 80% entrapment efficiency at 1% w/w initial drug loading when prepared with 1-3% w/v of PVA as a surfactant. These particulate carriers exhibited controlled in vitro release of rosiglitazone for 36 hrs at a nearly constant rate after 4 hrs release. In conclusion, these results indicate that PLGA NPs have greater potential for oral delivery of rosiglitazone.

LLC Resonant Converter with Auxiliary Switches Operating Over A Wide Output Voltage Range (넓은 입·출력전압 범위에서 제어 가능한 보조스위치 적용 LLC 공진컨버터)

  • Lee, Ji-Cheol;Kim, Min-Ji;Oh, Jae-Sung;Kim, Eun-Soo;Kook, Yoon-Sang
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.23 no.4
    • /
    • pp.256-264
    • /
    • 2018
  • This paper proposes a three-bridge LLC resonant converter with auxiliary switches for a wide output voltage control range. This converter can be controlled in two ways to achieve a wide controllable output voltage control range of $V_o$ to $3V_o$. The first control mechanism is achieved through the pulse width modulation (PM) of the auxiliary switches and primary switching devices, while the second control mechanism is achieved through the frequency modulation (FM) of the primary switching devices that are configured to operate in the full-bridge switching mode when the auxiliary switches are turned off. The feasibility of using the proposed converter is verified by the results of an experiment with a 2kW prototype.

Implementation of the Audio CODEC for Digital Audio Broadcasting Service (디지털 오디오 방송 서비스를 위한 오디오 코덱의 구현)

  • 장대영;홍진우
    • Journal of Broadcast Engineering
    • /
    • v.6 no.1
    • /
    • pp.66-71
    • /
    • 2001
  • This paper Introduces an implementation of MPEG-2 AAC codec system for digital audio broadcasting. This system consists of the encoder and the decoder. This system includes MPEG-2 system multiplexing and demultiplexing modules for Interfacing to the ETRI-DAB system. Four DSPs are adopted for the encoder and three DSPs for 7he decoder. Each DSP Processes system control. 1/0 control, audio signal processing. multiplexing and demultiplexing. This Paper also discusses some near future estimations relaxed to the DAB system and it\`s services. Currently a stereo audio codec is available but multi-channel audio codec and MPEG-4 audio cosec wall be also Implemented.

  • PDF

Implementation of the AAC Audio CODEC for Digital Audio Broadcasting (디지털 오디오 방송을 위한 AAC 오디오 코덱 구현)

  • 장대영;홍진우
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2000.11b
    • /
    • pp.43-48
    • /
    • 2000
  • This paper introduces MPEG-2 AAC codec system fur digital audio broadcasting. This system consists of encoder and decoder, and this system provides MPEG-2 system multiplexing and demultiplexing functions. Four DSPs are adopted fur encoder and three DSPs fur decoder. Each DSP processes system control, I/O control, and audio signal processing, multiplexing and demultiplexing. This paper also discusses about some near future estimations related to DAB system and services. And at the end of this paper describes about future development plans.

  • PDF

A Study on Isolated Words Speech Recognition in a Running Automobile (주행중인 자동차 환경에서의 고립단어 음성인식 연구)

  • 유봉근
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1998.06e
    • /
    • pp.381-384
    • /
    • 1998
  • 본 논문은 주행중인 자동차 환경에서 운전자의 안전성 및 편의성의 동시 확보를 위하여, 보조적인 스위치 조작없이 상시 음성의 입, 출력이 가능하도록 한다. 이때 잡음에 강인한 threshold 값을 구하기 위하여, 일정한 시간마다 기준 에너지와 영교차율(Zero Crossing Rate)을 변경하며, 밴드패스 필터(bandpass filter)를 이용하여 1차, 2차로 나누어 실시간 상태에서 자동으로, 정확하게 끝점검출(End Point Detection)을 처리한다. 기준패턴(reference pattern)은 DMS(Dynamic Multi-Section)을 사용하며, 화자의 변별력을 높이기 위하여 2개의 모델사용을 제안한다. 또한 주행중인 차량의 잡음환경에 강인하기 위하여 일반주행(80km/h 이내), 고속주행(80km/h 이상)등으로 나누며 차량의 가변잡음 크기에 따라 자동으로 선택하도록 한다. 음성의 특징 벡터와 인식 알고리즘은 PLP 13차와 One-Stage Dynamic Programming (OSDP)를 이용한다. 실험결과, 자주 사용되는 차량 편의장치 제어명령 33개에 대하여 중부, 영동 고속도로(시속 80Km/h 이상)에서 화자독립 89.75%, 화자종속 90.08%의 인식율을 구하였으며, 경부 고속도로에서는 화자독립 92.29%, 화자종속 92.42%의 인식율을 구하였다. 그리고 저속 주행중인 자동차 환경(80km/h 이내, 시멘트, 아스팔트 등의 서울시내 및 시외독립)에서는 화자독립 92.89%, 화자종속 94.44% 인식율을 구하였다.

  • PDF

SATELLITE'S LAUNCH WINDOW CALCULATION BY ASTRODYNAMICAL METHODS (천체역학적 방법을 이용한 인공위성의 최적발시간대)

  • 우병삼;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • v.11 no.2
    • /
    • pp.308-319
    • /
    • 1994
  • We can launch satellites only at a certain time which satisfies special conditions, since the current techniques cannot overcome these constraints. Launch window constraints are the eclipse duration, solar aspect angle, attitude control, launch site and the launch vehicle constraints, etc. In this paper, launch window is calculated that satisfies all these constraints. In calculating launch window, the basic concepts are relative locations of the sun-satellite-earth system and relative velocities of these, and these requires geometric consideration for each satellite. Launch window calculation was applied to Kitsat 2(low earth orbit) and Koreasat(geostationary orbit). The result is shown in the form of a graph that has dates on the X-axis and the corresponding times of the given day on the Y-axis.

  • PDF