• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.33-47
• /
• 2003

Various applied-mineralogical characterization including measurements of surface area, size distribution, swelling index, and viscosity were done for some domestic bentonites in order to decipher the rheological properties and their controlling factors. The bentonites, which are Ca-type and relatively low-grade (rnontmorillonite contents: 30 ∼ 75 wt%), occur mostly as subhedral lamellas with the size range of 2 ∼ 4 $\mu\textrm{m}$. The size distribution of mineral fractions in bentonite suspension is dominant in the range of 10 ∼ 100 $\mu\textrm{m}$, and though rather complicated, exhibits roughly bimodal patterns. The feature is more conspicuous in the case of zeolitic bentonite. The bentonites have surface areas ranging 269 ∼ 735 $\m^2$/g, which are measured by EGME adsorption method. The EGME surface areas are nearly proportional to the rnontmorillonite contents, moisture contents, or total CEC. In the surface area measurements, zeolitic bentonites have slightly higher values than those zeolite- free types. The measured swelling index and viscosity of domestic bentonites are comparatively low in values. The swelling values of bentonites were measured to be 250∼500% at maximum by progressively mixing amounts of 2 ∼ 5 wt% Na$_2$CO$_3$, which varies depending on the contents of rnontmorillonite and other impurities, especially zeolite. Much amount of sodium carbonate is required for optimum swelling property of zeolitic bentonited which has usually strong Na- exchanged capacity. The bentonites, which are comparatively feldspar-rich and low in size and crystallinity, tend to be higher in viscosity values. Tn addition, the viscosity is largely higher in case of the bentonites with higher pH in suspension. However, the rheological properties of bentonites such as swelling index and viscosity do not show any obvious relationships with rnontmorillonite contents and mean particle size in suspension. In contrast, roughly speaking, the swelling index of bentonites is reversely proportional to the values of surface area which can be regarded as a collective physico-chemical parameter encompassing all the effects caused by mineral composition, surface charge, particle size, morphological farm, and etc. in bentonites. Thus, the rheological properties in bentonite suspension appear to be rather complicated characteristics which mainly depend on the flocculation of clay particles and the mode of particle association, i.e. quasicrystals, controlled by surface charge, morphology, size, and texture of rnon-tmorillonite, and which partly affected by the finer impurities such as zeolite.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.112-118
• /
• 2012

Steel industry produces many by-products and wastes such as blast furnace slag, electric arc furnace slag, and converter slag. As in the case of rock, the main component of steel slag are CaO and $SiO_2$ ; further, steel slag is as alkaline as portland cement or concrete. Electric arc furnace oxidizing slag is possible to use as an aggregate for concrete ; however, it has been reclaimed because of it's expansibility caused by free CaO. Recently, a innovative rapid cooling method for melting steel slag has been developed in Korea, which reduces free lime content to minimum level and increases the stability of iron oxide. Therefore, this study describes the results of a series of research to utilize globular shape of electric arc furnace oxidizing slag fine aggregates made by rapidly cooled method for the construction industry by cooling rapidly melted slag from the steel industry. First of all, an experiment was carried out to investigate the quality characteristics of rapidly cooled electric arc furnace oxidizing slag fine aggregates in order to determine whether they can be applied to the construction industry. Then, by applying them to concrete of various particle sizes, we explored experimentally the desired condition to apply rapidly cooled electric arc furnace oxidizing slag fine aggregates to concrete.

• Korean journal of food and cookery science
• /
• v.30 no.5
• /
• pp.540-546
• /
• 2014

This study was conducted to compare the commercial noodle flours (n=8) of each milling company in Korea. Eight noodle flour samples were classified into two types of flours, all-purpose flour (AF, n=4) and premium noodle flour (PF, n=4) and tested using general component analysis. Texture assessment and sensory test for doughs and noodles were performed. The dough strength was positively correlated with lower ash content, smaller particle size and longer formation time. Sensory evaluation found that weaker cooked noodle strength correlated with higher scores in preference and softness. As a result, it can be suggested that PF is better than AF in noodle making because PF has lower ash content and smaller particle size than AF. As such, flour characteristics that produce noodle flour of uniform quality can be obtained by combining flours with the above processing characteristics to fit the qualities desired.

• 한국해양학회지
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1970

The water quality of the laver bed at Yongwon Ri, Changwon Gun was investigated during the spring and neap tide in March 1970. The effect of tide on the contents of various chemical constituents was irregular and the variation ranges of the contents were narrow. The pH value during flood and ebb tide was a constant of 8.2. The chlorosity range varied from 19.15 to 19.33g/l, the difference of 0.18g/l being comparatively small for coastal waters. The nutrient salts contents varied irregulary with the change in tide, but nitrite and soluble iron were not detected. In local distribution, chlorosity and silicate- silicon contents were found to be more at Sts. 1, 2 and 3 in the eastern area than at Sts. 4, 5 and 6 in the western area, wheras nitrate and ammonia contents were found to be more at Sts. 4, 5 and 6. The nitrate content was especially high, being twice as much as that at Sts. 1, 2 and 3 in the eastern area. In the spring tide, chlorosity was found, on the average, to be as much as 0.06g/l higher than in the neap tide, but the contents of nutrient salts were higher in the neap tide, especially the nitrate content was twice as much. When compared with other selected local laver beds, i.e., the tidal flats of the Nackdong and Somjin rivers, and of Wan Do Gun, the chlorosity level was highest but the nutrient salts contents level was, in general, slightly lower and the variation ranges narrow in the laver bed at Yongwon ri. The nitrate content, in particular was one tenth smaller than the others.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.25-30
• /
• 1982

To evaluate the quality of commercial dehydrated tea-products, the relationships between particle sizes, densities, moisture absorption & desorption and color appearance were studied by using Hunter-lab tristimulus colorimeter and spectrophotometer. Among the tea-products was held no significant relation between particle sizes and color appearance but red ginseng extract powder (RGEP) was included L, a and b values when was reduced particle size. appearance color of tea-products indicated red-orange color, L, a and b values were ranged 32.7 to 48.0, 4.0 to 10.0 and 5.6 to 18.0, respectively, densities of tea-products ranged 0.232 to 0.898 g/ml and increased L values, Hunter's a/b ratio values was included in 0.61 to 0.90. Color stability in this products was well agreed with decrease of total color difference value ($\Delta$E) and chromaticity difference value ($\Delta$C) of the Hunter-lab color data.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.185-193
• /
• 2003

준설, 매립 등의 해상공사가 해양환경에 영향을 미치는 주 요인은 공사중 발생하는 부유토사이다. 이러한 부유토사는 주변 해역으로 확산되어 여러 방식으로 해양생태계에 피해를 유발할 수 있으며, 발생 가능한 피해의 범위와 정도는 부유토사 발생율과 해저 죄적물 입도분포 및 주변 유속에 따라 결정된다. (중략)

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.1
• /
• pp.54-63
• /
• 2019

As a part of the national marine ecosystem monitoring program, the temporal and spatial variation of sedimentary environment and pollution of organic matters and trace metals from four major tidal flats, i.e., Ganghwa Is., Garolim bay, Jeung Is., Suncheon bay, was investigated for 3 yerars from 2015 to 2017. The mean grain size of the sediment was $5.0-5.3{\varnothing}$ at Ganghwa Is, $4.5-4.8{\varnothing}$ at Garolim bay, $6.1-6.5{\varnothing}$ at Jeung Is, and $8.6-8.7{\varnothing}$ at Suncheon bay. The mean grain size (Mz) tended to decrease from the north (Ganghwa Is.) to the south (Suncheon bay). The ignition loss (IL) was 15.5% in Suncheon bay in 2015, which was relatively high compared to other sites, but gradually decreased over time from 8.3% in 2016 to 7.0% in 2017. In Jeung Is. and Suncheon bay, the concentration of Zn and As exceeded the threshold effect level (TEL) at some stations, but the range of trace metals in the other sites was below the level. In Jeung Is., the Mz and concentration of trace metals except Hg was positively correlated (r= 0.40-0.88, P<0.05). On the other hand, Mz was negatively correlated with trace metals (P<0.05) in Suncheon bay. The geoaccumulation index ($I_{geo}$) to evaluate contamination status of sediments for trace metal was less than 1(not contaminated) for Cu, Zn, Pb, Cd and Hg, and 2-3 (moderately to strongly polluted) for As at several stations in Suncheon bay and Jeung Is.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.48-55
• /
• 2011

In this research, the near-infrared absorption from 1,100-2,300 nm was used to measure the content of capsaicinoids in the red-pepper powder by using the Acousto-optic tunable filters (AOTF) spectrometer with sample plate and sample rotating unit. Non-spicy red-pepper samples from one location (Younggwang-gun. Korea) were mixed with spicy one (var. Chungyang) to make samples separated by particle size (below 0.425 mm, 0.425-0.71 mm, and 0.71- 1.4 mm). The Partial Least Squares Regression (PLSR) model to predict the capsaicinoid content on particle sizes was developed with measured spectra by AOTF spectrometer and used to analyze the amount of capsaicinoids by HPLC. The PLSR Model of red-pepper powder of below 0.425 mm, 0.425-0.71 mm, and 0.71-1.4 mm with cross validation had ${R_V}^2$ = 0.948-0.979 and Standard Error of Prediction (SEP) = 6.56-7.94 mg%. The prediction error of smaller particle size of red-pepper powder was low. The best PLSR model was found in pretreatment of Range Normalization, Standard Normal Variate, and 1st Derivatives of red-pepper powder of below 1.4 mm with cross validation, having ${R_V}^2$ = 0.959 and SEP = 8.82 mg%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.218-218
• /
• 2022

본 연구는 TELEMAC을 이용한 수평 2차원 수치모의를 통해 달성보 상류관리수위에 따른 하천 흐름 및 하천하상 변화에 관한 연구를 하는 것이다. 하천의 하상변동을 모의한 결과를 토대로 장래 하상변화에 대한 적절한 상류관리수의를 검토하였다. 모의 결과, 낙동강과 금호강의 합류부, 그리고 하천의 곡류부에서 비교적 큰 지형변화가 발생하는 것으로 검토되었다. 또한, 관리수위가 낮아질수록 더 큰 하상변화를 초래하는 것으로 나타났다. 하천하상의 유사이동에 따른 입도분석 결과 0.062~0.25mm 범위의 모래 입자가 다른 입자에 비해 더 쉽게 하류부로 이동하여 위 범위의 모래 입자가 달성보 상류부에 퇴적됨을 확인할 수 있었다. 수치모의 결과에 따라 낙동강 달성보 상류부의 관리수위를 EL. 14.0 m 로 유지하는 것이 하천하상 변화를 최소화하는데 적절할 것으로 사료된다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.34-42
• /
• 2015

The paper investigates environmental hazards and characteristics of the artificial lightweight aggregate manufactured by using dyestuff sludge from dyeing industrial complex. The dyestuff sludge used in this study is chemically treated with Ti and Fe salt for the purpose of recycling. The artificial lightweight aggregate is manufactured through 3 step; 1) Selecting the optimum moisture content by evaluating plasticity from the mixing ratio of the clay and sludge, 2) shaping round type based on the optimum mixing ratio, 3) drying and Sintering process. Based on KS F 2534 "Lightweight Aggregate for Structural concrete", the particle size, fineness modulus, the density, absorption, unit volume weight, stability and environmental hazards of the manufactured lightweight aggregate are evaluated. Experimental results show that the particle size and fineness modulus is out of the range. However, it is observed that other physical properties are within criteria. In addition, it is confirmed that the problem of the particle size and fineness modulus could be solved in the manufacturing process.