• Journal of the Korean Geotechnical Society
• /
• 제33권9호
• /
• pp.23-34
• /
• 2017

In order to develop urban underground spaces, even microcracks should be reinforced. In this paper, the grouting injection performance for microcracks was investigated considering the viscosity and particle size of the grouting materials, injection pressure, and crack width. There are two types of typical grouting materials used for filling micro-cracks. One is a chemical liquid grouting material which is a solution type and the other is a cementitious grouting material which is a suspension type. The injection performance of the grouting materials for microcracks is generally influenced by the viscosity, and the injection performance of the cementitious grouting material is additionally affected by the particle size. From laboratory tests, the viscosity was calculated inversely to provide a suitable viscosity measurement method for each grouting material. The groutability ratio based on the relationship between the crack width and the particle size was evaluated to estimate the grouting feasibility of the cementitous grouting material through microcracks.

• Journal of Sensor Science and Technology
• /
• 제1권1호
• /
• pp.67-75
• /
• 1992

PTC thermistor has been fabricated with as-received $BaTiO_{3}$ powder and its electrical properties were investigated. The resistivity of the PTC thermistor was measured at $20^{\circ}C$ intervals from $20^{\circ}C$ to $200^{\circ}C$. The electrical characteristics of the PTC thermistor are determined by the ac complex impedance analysis. The average grain size measured with a scanning electron microscope increased from $3.8{\mu}m$ to $8.8{\mu}m$ with increasing sintering temperature between $1280^{\circ}C$ and $1400^{\circ}C$. The maximum resistivity jump was $4{\times}10^{5}$. The bulk resistivity of the thermistor sintered above $1340^{\circ}C$ decreased with increasing temperature of the measurement. The grain boundary resistance increased exponentially, the grain boundary capacitance decreased, and the built-in potential at the grain boundary increased with increasing temperature of the measurement. The charge densiy at the grain boundary increased with increasing temperature up to $110^{\circ}C$, which leveled off with further increase in measuring temperature.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제17권1호
• /
• pp.73-79
• /
• 2009

The hydraulic conductivity of porous media is the most important property in soil characteristics. The hydraulic conductivity is determined by outdoor and indoor methods. Indoor methods normally use soil columns for flow test. Assumption of the column test is that fluid one-dimensionally flows through the column. However, fluids may flow toward the wall of the column, resulting in "boundary flow". This study investigated the effect of boundary flow on the hydraulic conductivity by using a permeameter excluding boundary flow. The results showed that the hydraulic conductivity excluding boundary flow was much smaller than the hydraulic conductivity employing the conventional determination method. This study also investigated the effects of particle size and surfactant on the hydraulic conductivity. As the particle size increased, the hydraulic conductivity was increased. The hydraulic conductivity was reduced by increasing surfactant concentration. The result showed that the viscosity of fluid significantly affected the determination of hydraulic conductivity.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 한국대기환경학회 2006년도 춘계학술대회 논문집
• /
• pp.237-238
• /
• 2006

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 한국대기환경학회 1999년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 1999

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 한국대기환경학회 2004년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 2004

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.250-252
• /
• 2006

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.260-262
• /
• 2006

• Journal of the Korean GEO-environmental Society
• /
• 제17권10호
• /
• pp.33-43
• /
• 2016

The determination of in-situ capping materials is one of the most important factors to design in-situ capping in order to protect capping materials from erosion. Previous studies have established relationship between the velocity induced by wave energy and effective diameter of sediments, but they are mostly empirical and numerical researches which is too complicated for field engineers to analyze the erosion of in-situ capping materials. This study provides simple analytical solutions and reliability based on hydraulic model test results. Experimental results show that measured flow velocities with respect to depth induced by wave energy are almost the same as estimated velocities and the erosion resistances of the different effective particle diameters can be estimated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권7호
• /
• pp.714-719
• /
• 2017

The controlled synthesis of inorganic materials with a specific size and morphology is an important factor in the development of new materials in many fields, such as nanoparticles, medicine, electronics, semiconductors, pharmaceutical sand cosmetics. Solution crystallization is one of the most widely used separation processes in the chemical and pharmaceutical industries. Calcium carbonate has attracted a great deal of attention in industry because of its numerous applications. The mean crystal size, crystal size distribution and morphology are important factors in the continuous crystallization process. In this study, the continuous crystallization of calcium carbonate by the calcium chloride process was investigated. The mean crystal size and crystal size distribution data were obtained by a particle size analyzer. The morphological imaging of the crystalswasper formed by SEM. Under steady state operation, the mean crystal size change was small, but increasing the input concentration and mixing rate increased the crystal size. In this operation, some aragonite was found, but the main crystal phase was calcite.