• The Journal of the Acoustical Society of Korea
• /
• v.4 no.2
• /
• pp.26-35
• /
• 1985

본 논문에서는 시스템의 전달계에 있어서 추정임펄스응답신호의 정도평가법으로서 새로운 방법 을 제안한다. 이 방법의 효과에 대해서는 종래부터 이용되어온 방법들과의 논의와 컴퓨터 시뮬레이션실 험 결과를 비교하여 기술하고 있다. 추정임펄스응답의 정도는 다음의 절차에 의해 평가하고 있다. 전달 계의 입력신호는 컴퓨터가 발생하는 화이트노이즈로서 구동시키고, 그 전달계의 응답신호는 전달계를 통한 입력신호를 측정한다. 이 때 전달계에서 추정응답신호를 얻기 위하여 추정임펄스응답신호와 구동 입력신호인 화이트노이즈를 콘볼루션 계산을 행한다. 추정응답신호인 계산한 응답신호와 측정한 응답신 호는 각 샘플링 시간에 있어서 차의 신호의 파워의 합을 측정한 응답신호의 샘플값을 제곱한 신호의 합 에 대해 비를 계산한다. 이 비율이 음향전달계의 추정임펄스응답신호의 정도평가법에 사용된다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.292-296
• /
• 2000

본 논문에서는 임펄스 잡음과 다중경로 레일리 페이딩이 함께 존재하는 최악의 채널 환경에서 비동기 DS/CDMA BPSK 시스템의 오율식을 유도하고 수치계산 하여 BER 성능을 분석하였다. 그 결과, 비교적 낮은 신호 대 잡음 전력비 영역에서 시스템의 BER 성능은 임펄스 잡음의 영향으로 크게 열화되지만 페이딩의 영향은 거의 없다. 그러나, 임펄스 잡음의 영향이 작아지는 높은 신호 대 잡음 전력비에서는 페이딩에 의해서 BER 성능이 결정된다. 다중사용자의 간섭도 낮은 신호 대 잡음 전력비 영역에서는 BER 성능에 거의 영향을 미치지 못하지만 높은 신호 대 잡음 전력비 영역에서는 BER 성능을 좌우한다 그러나, 실제 이동통신 시스템에서는 비교적 낮은 신호 전력을 사용하므로, 임펄스 환경에서 페이딩을 경감하기 위한 방법이나, 다중사용자 간섭을 줄이기 위한 기법을 적용하더라도 성능 개선이 거의 되지 않는다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.663-668
• /
• 2008

In this paper, we analyzed the error rate Performance of convolution coded 16 QAM signal in impulsive noise Environments. We used convolution rode and maximum ratio combining diversity for performance improvement. We analyzed the error rate performance of 16 QAM signal in implusive noise environments compared with gaussian noise environments. As a result of analysis, there is a BER segment where the efficiency of system does not improve until which limit to raise a signal power potential from impulsive noise environment when the signal power potential which goes over this limit is supplied, BER efficiency improve much more.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.143-146
• /
• 1999

특정 플랜트내에 원하지 않는 음이나 진동신호를 능동적으로 제어하기 위해 LMS의 Filtered reference와 Filtered error 방법으로 피드포워드 적응제어 시스템을 사용할 때 오차신호의 수렴특성을 플랜트의 추정 임펄스응답의 정확도로써 나타낼 수 있는 식을 제안하고 수치 시뮬레이션과 실험으로 그 유효성에 대해 기술한다. 플랜트내 음향전달계의 추정 임펄스응답의 안정성 평가식은 이미 W. Ren과 P. R. Kumar에 의해 발표되었으나[1], 그 평가방법은 플랜트내의 실제(True) 임펄스응답을 필요로하고있어 수치 시뮬레이션에서는 가능한 방법이지만 임펄스응답의 측정이 불가능한 실제의 적응제어 시스템에 적용하는 것은 곤란하다. 따라서, 플랜트의 추정 임펄스응답을 크로스스펙트럼법(Cross-Spectrum)으로 추정하여 그 임펄스응답을 피드포워드 적응제어 시스템에 적용했을 때 안정성 여부를 평가하고, 또한 오차신호의 수렴특성을 Filtered reference와 Filtered error 방법에서 각각 확인하였다. 수치 시뮬레이션 결과와 실험 결과가 일치함을 확인하였다.

• Composites Research
• /
• v.35 no.1
• /
• pp.8-12
• /
• 2022

Analysis of defect signals inside glass fiber reinforced polymer (GFRP) was conducted through deconvolution of terahertz (THz) wave. The GFRP specimen with internal defects was manufactured and the THz signal was measured through the reflection mode of the Terahertz Time-Domain Spectroscopy (THz-TDS) system. For deconvolution of the measured THz signal, the peak position of the THz signal was amplified through Normalized Cross Correlation (NCC) of the incident and detected THz signals. The position and intensity of the amplified peak were extracted as impulse, and the extracted signal of the impulse position was removed from the THz original signal. By repeating the process, the critical impulses, which represent boundary of the specimen, were derived. The deconvolution process was verified by confirming that the original THz signal without noise can be restored through the convolution of the critical impulses and the incident signal. From the derived critical impulses, the thickness of the internal defect in the GFRP was calculated through the detection time of impulses within 15 ㎛ accuracy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.57-62
• /
• 2005

In this paper, we propose a channel estimation method by impulse signal train in OFDM. In order to estimate the channel response, 4 impulse signals are generated and transmitted during one OFDM (Orthogonal Frequency Division Multiplexing) symbol. The intervals between the impulse signals are all equal in time domain. At the receiver, the impulse response signals are summed and averaged. And then, the averaged impulse response signal is zero padded and fast Fourier transformed to obtain the channel estimation. The BER performance of the proposed method is compared with those of conventional estimation method using the long training sequence in fast fading environments. The simulation results show that the proposed method improves by 3 dB in terms of Eb/No, compared with the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.755-761
• /
• 2005

In this paper, we proposed a channel estimation method by impulse signal train in OFDM. In order to estimate the channel response, 4 impulse signals are generated and transmitted during one OFDM (Orthogonal Frequency Division Multiplexing) symbol. The intervals between the impulse signals are all equal in time domain. At the receiver, the impulse response signals are summed and averaged. And then, the averaged impulse response signal is zero padded and fast Fourier transformed to obtain the channel estimation. The BER performance of the proposed method is compared with those of conventional estimation method using the long training sequence in fast fading environments. The simulation results show that the proposed method improves by 3 dB in terms of Eb/No, compared with the conventional method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2798-2804
• /
• 2010

The audio and image signal are corrupted by various noises in signal processing, many studies are being accomplished to restore those signals. In this paper, the algorithm is proposed to remove additive Gaussian noise and impulse noise at one dimension signal like an speech signal. The algorithm is composed to remove Gaussian noise after removing impulse noise. And the method using wavelet coefficient accumulation is used to remove the Gaussian noise, and the median filter based on element deviation is applied to remove the impulse noise. Also we compare existing methods using SNR(signal-to-noise ratio) as the standard of judgement of improvemental effect.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.36-54
• /
• 1995

The error performance of digital radio signals (i.e., M-ary PSK signal, DQPSK signal, MSK signal, GMSK signal) interfered by impulsive noise and electromagnetic interference (EMI) is analyzed and discussed. In analysis at first, the error rate equations have been derived in an electromagnetic interference plus impulsive noise environment. And then, the error performance has been evaluated and shown in figures as a function of carrier-to-noise ratio, carrier-to-interference ratio, impu- lsive index, gaussian noise to impulsive noise power ratio, and interference index to measure the amount of error degradation in digital radio signals. From the obtained results we have known that in the presence of m-distributed tone interference plus inpulsive noise, the more significant the electromagnetic interference amplitude varies, the more significant performance degradation is produced. The listing the digital radio signals from the most degraded to the least is that DQPSK, GMSK, QPSK and MSK signal. In the constant amplitude tone interference plus impulsive noise environment, the effect of in- terference nearly disappears over about 20dB in CIR. The effect of constant tone interference on error rate performance is reduced more remarkably in the region from 10dB to 15dB in CIR. In both enviroments of m-distributed tone interference and constant amplitude tone interference, the more electromagnetic interference amplitude varies and CIR increases, the more error perfor- mance is improved. But it is found out that the performance can not be improved significantly even the electromagnetic interference becomes weak. This describes that the impulsive noise affects dominantly to the performance degradation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.165-170
• /
• 2005

In this paper, influences of a ultra wideband (UWB) antenna on impulse channel measurement are investigated in time domain (TD) and frequency domain (FD) as well. Firstly, impulse response of an UWB antenna is obtained and then using the result of impulse response of the UWB antenna, influences of the antenna on impulse radio channel is analyzed. Furthermore, using the impulse response of the UWB anenna, method of impulse radio channel analysis is presented by excluding the effect of the antenna from an impulse radio channel. For verifying the theory, a modified conical monopole antenna is designed for measuring impulse radio channel and its impulse response is obtained. After that, in order to investigate the effects of the UWB antenna on an impulse radio channel, multipath environments are set up in an anechonic chamber and transmission coefficient for each multipath environment is measured with an aid of vector network analyzer. Data measured in frequency domain is transformed into those in time domain by way of signal processing. Measurement shows that such properties of the antenna as dispersion and ringing affect impulse radio channel. Moreover, using the impulse response of the antenna, impulse response of only multipath channel is obtained.