• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.117-127
• /
• 2002

In this paper, structure design of the payload section of the KSR-III was performed. The payload section of the KSR-III, which corresponds to the second stage, consists of the Scientific Payload Section for the mission of the rocket, the Payload Section (Electronics) for the communication between the rocket and the ground station, and the Payload Section (Attitude Control) for the attitude control of the rocket. In order to accomplish the mission, every payload and component should operate successfully during the mission period and the structure must satisfy the requirements of the payloads. In this research, precise composition of the payload section and payloads arrangement of the KSR-III were performed. And the modification of the structure to meet the requirements were described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1216-1221
• /
• 2008

A low earth orbit satellite with a fixed solar array always has a sun-pointing attitude during daylight, and changes into a nadir-pointing attitude for a imaging mission. Since external heating sources to the satellite panels are Earth　irradiation and Albedo during most of daylight in a sun-pointing attitude, the thermal environment condition is relatively stable. However, direct sunlight which is the greatest environmental heating has an affect on the satellite panels during a mission period (10% of one orbit) in a nadir-pointing attitude. In satellite thermal design, thermal effects of a nadir-pointing mission attitude due to this thermal environment change need to be evaluated although the duration of a nadir-pointing attitude is short. Therefore, a nadir-pointing attitude during a mission is incorporated into thermal model and by the thermal analysis result, thermal effects on the satellite are investigated.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.31-38
• /
• 2005

Conceptual design of an Aerostat was completed. Configuration was determined based on wind tunnel test results of aeostat hulls to have longitudinal static stability. Hull surface area and volume were obtained by using of Cubic spline method for given configuration and length. Final length of a hull was determined by iteration process. Cable tension and payload were estimated for conceptual design. A parametric study was performed for various weight and misson altitude. As results, a 30m class aerostat was designed and described.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.40
• /
• pp.69-79
• /
• 1996

하드웨어 설계 과정에서 신뢰성 담당자들에게 당면한 문제는 요구된 임무에 필요한 기능적 요구사항의 달성 가능성과 요구된 임무를 달성할 확률의 예측여부 및 이의 적합성을 판단하는 것이다. 첫번째의 문제는 기존의 신뢰성 공학의 방법을 사용하여 해결되지만 두번째의 문제는 잦은 사후 설계 변경을 필요로 하기 때문에 항상 시스템 전체에서의 최적을 고려하여 이루어지지 못하고 있다. 본 논문에서는 그러한 잦은 사후 설계 변경등으로 인한 취약한 점을 극복하기 위한 방법론으로 하드웨어 설계 신뢰성 공학을 다루며 그 분석 도구로서 목표달성 나무(Goal-tree)의 사용과 그 응용을 제시하고자 한다.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.381-385
• /
• 2006

2008년 발사를 목표로 개발되고 있는 통신해양기상위성(COMS: Communication, Ocean and Meteorological Satellite)는 기상 관측과 해양 관측 임무 및 통신 임무까지 수행하는 정지궤도 위성이다. 통신해양기상위성은 크게 탑재체와 지상국으로 나눌 수 있고 지상국은 다시 통신 임무를 위한 CTES(Communication Test Earth Station), 해양/기상 임무를 위한 IDACS(Image Acquisition and Control System), 그리고 위성 관제와 운영을 위한 SGCS(Satellite Ground Control System)로 구분된다. 이 중 IDACS의 서브시스템 중 하나인 LHGS(LRIT/HRIT Generation Subsystem)는 LRIT/HRIT(Low Rate Information Transmission/High Rate Information Transmission)를 생성하고 배포하는 기능을 가지고 있다. 관측 종료 후 LRIT/HRIT 전송 완료까지 15분 이내로 이루어져야 한다는 기상청의 요구사항을 만족하기 위해서 JPEG 압축 시간도 중요한 요소로 고려되어야 한다. 그래서 본 논문에서는 MTSAT에서 받은 LRIT/HRIT의 자료 처리를 바탕으로 lossless JPEG와 lossy JPEG의 압축 시간을 측정하여 압축률을 비교하여 성능 분석을 해보기로 한다. 이렇게 도출해낸 수치자료는 COMS LHGS 설계에 활용할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.40-50
• /
• 2003

The operational orbit evolution of the KOMPSAT-l over 3 years was analyzed. During LEOP, four orbit maneuvers were performed to obtain the optimized orbit and eight safe-hold modes happened. The effects of unpredictable occurrence of the safe-hold mode and the highest solar activity on the orbit evolution during the mission life were analyzed. The comparison of orbital elements between long-term predicted orbit and determined orbit from observed data was also performed. The operational orbit started from the optimized one was evolved within the boundary of the designed mission orbit except altitude and it was verified the sun-synchronous orbit was successfully maintained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.877-888
• /
• 2022

Recently, as the CAPSTONE, a precursor mission for Lunar Gateway, was launched on a small launch vehicle for the purpose of demonstrating communications and navigation technology in the NRHO, large attention was brought to this event that enabled high-impact deep space mission using dedicated small launch vehicle and small spacecraft. In this study, we introduced the concept of a dual launch operation and examined the capability of the new concept in the exploration of the Moon, Mars and asteroid. It turned out a single launch is sufficient for the lunar low orbit mission up to around 247 kg, and the dual launch option can transport 215 kg and 183 kg to nearby destinations as such as Mars and astroid Apophis respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.59.2-59.2
• /
• 2021

현재 우리나라는 달탐사 개발 사업을 통하여 2022년 8월 발사를 목표로 달 궤도선인 KPLO와 과학임무 및 기술검증 임무를 수행하게 될 임무 탑재체, 임무 수행을 위한 각종 소프트웨어의 개발, 궤도/궤적의 설계 등 일련의 개발 과정을 순조롭게 수행하고 있다. 또한 달 궤도선인 KPLO와 이들 탑재체에 대한 운영과 관제를 수행하는 KPLO 심우주 지상국도 일정에 따라 개발 막바지에 접어들고 있다. 특히 KPLO 심우주 지상국에는 우리나라 대학과 정부출연연구소에 의해서 개발되는 과학탑재체 4기가 달 궤도에서 과학임무를 수행하여 얻게되는 달 탐사 과학자료, 즉, 과학임무자료를 달 탐사에 직접 참여하는 과학자들뿐만 아니라 일반인들도 교육 및 연구에 활용할 수 있도록 달 탐사 과학자료의 저장, 공개, 관리를 위한 Archive system인 KARI Planetary Data System(KPDS)도 함께 개발되고 있다. KPDS는 전문 연구자와 일반인들이 별도의 교육없이 인터넷을 통하여 쉽게 접속하여 KPLO의 과학탑재체가 획득한 달 탐사 과학자료를 검색하여 내려받아 사용할 수 있도록 서비스를 제공할 예정이다. 본 논문에서는 과학탑재체 개발기관 소속의 연구자가 달 탐사 과학자료에 대한 검보정 처리와 과학적 분석을 수행하기 위해서 텔레메트리 형태의 원본형태의 과학자료를 KPDS로부터 다운로드 받는 과정과 검보정 처리가 된 과학자료를 일반 사용자들이 내려 받아 사용할 수 있도록 과학자료가 공개되기까지 일련의 과정을 설명하고, 연구자 및 일반사용자가 직접 접하게 되는 KPDS의 주요한 사용자 환경에 대해서 설명한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.327-334
• /
• 2013

In August 2012 the first CanSat competition was hosted by the Satellite Research Center of KAIST under auspice of the Ministry of Education, Science and Technology. The present authors team won the first prize in the university session. In this paper the overall procedure of the CanSat project presented from the conceptual design stage to the final launch test. As the compulsory mission CanSat should send GPS data and attitude information to the ground station which in practice was performed via Bluetooth channel. In addition our CanSat is designed to trace the sun for the solar panels supplying electric power of satellite. IMU and servo motors are used for the attitude control in order that the solar sensor of the CanSat is always direct towards the sun. Launching of CanSat was simulated by dropping from a balloon at the height of around 150m via parachute. Launching test results showed that the attitude control of the CanSat and its solar sensing function were successful.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.505-513
• /
• 2021

We propose an autonomous mission management software design and verification technique for unmanned aerial vehicles to autonomously mitigate dynamic situation changes occurred in the inside and outside of an aircraft in compliance with the mitigation priority order. The proposed autonomous mission management software is designed in a modular architecture that consists of concurrently executing multiple threads. To verify it, we suggest three verification steps: 1) software integration by checking the expected request/response messages between the threads for all possible dynamic situation changes; 2) integration test to verify the software functionality; 3) performance test to verify the quantitative software performance. Especially, the software integration test environment is built and utilized to carry out the integration and performance tests.