• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.1-7
• /
• 2002

During the preliminary design phase of aircraft development, it is necessary to evaluate many potential engine/airframe combinations to determine the best solution to given set of mission requirements and it is very important to establish a methodology to calculate precisely engine installed performance. It was carried out to calculate turbofan engine installed performance of a supersonic aircraft for a given engine/aircraft configuration. Thus "Thrust minus drag accounting system" was introduced to identify and calculate the elements of installed thrust or installed propulsive force by using the database based on wind tunnel test data. This paper describes the calculated results of installed thrust of turbofan engine for a supersonic aircraft. aircraft.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.936-944
• /
• 2019

Submarines, which have been called an invisible force, are strategic underwater weapon systems that perform missions such as anti-surface warfare, anti-submarine warfare, and high payoff target strikes with the advantage of underwater covertness. A submarine should be able to withstand the hydrostatic pressure of the deep sea. In this respect, the submarine pressure hull, as the main structural system to resist the external pressure corresponding to the submerged depth, should ensure the survivability from hazards and threats such as leakage, fires, shock, explosion, etc. To do this, the initial scantling of the submarine pressure hull must be calculated appropriately in the concept design phase. The shape of the aft transition ring varies according to its connection with the submarine aft end conical structure, pressure hull cylindrical part, and non-pressure hull of the submarine; the design of the aft transition ring should not only take into account stress flow and connectivity but also the cost increase due to the increased man-hours of its complex geometry. Therefore, trade-off studies based on the four different shapes of the aft transition ring are carried out considering both the review of the structural strength through nonlinear finite element analysis (FEA) and economic feasibility by reviewing the estimations of the manufacturing working days and material costs. Finally, the most rational structural aft transition ring shape for a submarine amongst four reviewed types was proposed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.706-711
• /
• 2015

The fighter aircraft uses several different loading configurations for air-to-surface and air-to-air combat missions. To maintain wings-level flight with an asymmetric weapon configuration, a pilot controls a roll trim system. However, it is difficult to apply an accurate roll trim input for wings-level flight in the actual flight under disturbance. The inaccurate roll trim input degrades the performance of the roll autopilot system. In this paper, to solve this problem, an integrator was additionally designed in the command part of the roll autopilot system. The initial transient response was improved by scheduling the limiter to restrict the roll attitude error. As a result of the evaluation of the simulation for the designed flight control law, the roll attitude following performance was found to be improved in the autopilot system operation under the inaccurate roll trim condition.

• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.46-58
• /
• 2018

A two-axis gimbal-type X-band antenna is widely used to transmit bulk image data from high-resolution observation satellites. However, undesirable microvibrations induced by driving the antenna should be attenuated, because they are a main cause of image-quality degradation of the observation satellite. In this study, a pseudoelastic memory alloy (SMA) gear was proposed to attenuate the microvibrations by driving the antenna in an azimuth angle. In addition, the proposed gear can overcome the limitations of the conventional titanium blade gear, which is not still enough and is vulnerable to plastic deformations under excessive torque. To investigate the basic characteristics of the proposed SMA mesh washer gear, a static load test was performed on the thickness of the SMA mesh washer and the rotation of the gear. Moreover, The microvibration measurement test demonstrated that the SMA mesh washer gear proposed in this study is effective for microvibration attenuation.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.48-51
• /
• 1992

항공기 비행품질에 영향을 주는 설계분야는 크게 3가지로 항공기 형상, 조종체계 및 조종실 배치로 분류됩니다. 이들 3가지 설계분야 중에서 조정실의 운용자 인간공학적인 요구 사항을 고려하지 않으면 항공기 운용성 품질중에 3분의 1이 감소될수 있습니다 항공기를 개발할때에 개발자는 그 항공기를 운용하는 운용자의 인체, 생리, 심리, 습관 등을 고려해, 항공기 조종실의 인간공학적 최적화 설계 및 배치를 개발초기단계부터 적용해야 합니다. 항공기의 조종실의 인간공학적 최적화 설계 및 배치를 개발초기단계부터 적용해야 합니다. 항공기의 조종실 품질은 조종사가 항공기 비행 임무를 수행할 때에 항공기 비행을 위한 용이한 정보 인식, 용이한 정보 결심 및 용이한 조종의 특성을 조종사에게 제공할 때 항공기 비행 품질이 좋아질 것입니다

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.19-22
• /
• 2015

Human powered aircraft (HPA) is an airplane that uses only human power for its propulsion. The human power as a power resource and an engine produce the available power that is very crucial to the success of the HPA. In the present paper, the human power characteristics for completing the mission profile are discussed focusing on the take-off and climbing performance. The mission profile is designed by using an athlete's power generation. It is believed that present analysis can be helpful for the mission profile design and athletes exercise program development for the HPA competitions.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.437-441
• /
• 2013

항공기의 날개에 걸리게 되는 하중은 설계단계에서 고정되기 때문에 이륙과 착륙 같은 특수한 상황에서는 Flap이나 슬렛 등의 고양력 장치를 이용하여 날개 단면 형상을 변화시킴으로서 양력계수의 변화를 유도하고 그에 따라 각 임무별 최적의 공력 성능을 제공할 수 있게 된다. 따라서 본 논문은 에어포일의 보다 효율적인 양력을 위해 slotted flap사이에 양력 향상 Tab을 설치하여 EDISON-CFD을 이용하여 분석하였다. 그리고 그 효과와 익형에 얻어지는 양력계수를 비교하였다. 에어포일의 Slotted Flap에 양력 향상 Tab의 유무에 따른 유동 장을 분석하여 양력을 수치 해석 적으로 비교해 보았다. 결과에서 얻어진 상수를 비교하였고 양력 향상 Tab의 효과를 분석해 보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.345-347
• /
• 2015

인공위성은 다양한 센서장치, 구동장치, 전자장치들로 구성되어 있으며, 위성을 제어하는 컴퓨터 장치는 이들 장치들과 다양한 종류의 통신 버스로 연결되어있다. 정의된 프로토콜에 따라 명령을 전송하고 장치들의 상태 정보를 수집하여 위성을 운영한다. 위성에서 많이 사용되는 대부분의 상용 센서나 구동장치들은 표준화된 버스 (ex, 1553B, CAN, UART, etc ...) 인터페이스를 지원한다. 그러나 위성의 임무나 설계에 맞게 특수하게 제작된 장치의 경우는 범용의 버스보다는 용도에 적합한 프로토콜이 설계되고 제작된다. 본 논문에서는 2018년 발사 예정인 정지궤도복합위성 컴퓨터 장치 (GMU) 내의 프로세스 모듈과 시스템의 이상상태를 감지하여 GMU의 운용 모드 및 형상의 변경을 담당하는 MRE 모듈사이의 통신을 담당하는 IMGL 설계를 소개하고 IMGL 운영을 담당하는 소프트웨어 설계 및 구현 내용을 기술한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.1
• /
• pp.97-104
• /
• 2014

In this study, preliminary thermal sizing was performed with the aim of developing a fuel supply and cooling system design to solve the heating problems in high-speed vehicles. First, an analysis model was used to satisfy an optional mission profile. The heat loads were computed under boundary conditions. The results were verified using the precedent design case. Then, fuel consumption rates were estimated for the analysis trajectory. Accordingly, the cooling capacity in the system was calculated using the heat sink capacity of the endothermic fuel. Lastly, the fulfillment of the design requirements was confirmed in comparison to the cooling needs.