• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1817-1823
• /
• 2012

On the matter in line with NCW(Network Centric Warfare) and information age, the military is on an efficient-expanding trend as sharing with status and information promptly through the various and complex exchange of messages and the voice communication between operators, using a highly efficient operating console. The recording devices that record an operational situation to plan a new operation through the mission analysis and result reviews after finishing military operation or training are developed and operated. Recording method is classified into two groups. one is the direct recording of video data for screen, another is the recording of an exchange of data. This study proposes the new data-oriented recording method to reduce the readiness time for replay and the improvement scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.357-360
• /
• 2011

On the matter in line with NCW(Network Centric Warfare) and information age, the military is on an efficient-expanding trend as sharing with status and information promptly through the various and complex exchange of messages and the phone communication between operators, using a highly efficient operating console. The recording devices that record an operational situation to plan a new operation through the mission analysis and result reviews after finishing military operation or training are developed and operated. Recording method is classified into two groups. one is the recording of display shots, another is the recording of an exchange of messages. This study proposes the new data-oriented recording method to reduce the readiness time of replay and the improvement scheme.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.1-9
• /
• 2017

The ICS, Intercom is the equipment which mixes and distributes the audio signal from other LRUs and plays the Voice Messages. Henceforth, it is of immense contributory importance to the pilots. Especially, the audio routing, which controls On/Off mode of each audio channel, is significant in executing a pilots' mission. But the audio routing process is quite complicated as it has the interface combination of many control signals. Underthecondition, the exceptional handling becomes difficult, which decreases maintainability and productivity. In the present work, to prevent such a situation, the author suggests amethodology,whichwillhavealower impact when the software is changed and provides high maintainability and productivity for audio routing processing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.648-653
• /
• 2014

Fly-wheel, gimbal antenna, mechanical gyro and cryocooler with moving parts generate a micro-vibration during their on-orbit operation. For the acquisition of high quality image of observation satellite, additional technical efforts are required to reduce the micro-vibration level from the vibration sources. In this study, we proposed a passive isolation system combined with a tuned mass damper-type energy harvester to generate electrical energy from the micro-vibration which has always been subjected to useless isolation objectives. The feasibility of the system has been investigated through the numerical simulation.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2023

P-3C/K aircraft for maritime patrols that Republic of Korea Navy is using, is equipped with a variety of sensors and communication devices. Collected data from the aircraft is managed as tactical information by flight operators and stored. When the flight mission is completed, this information is transferred to tactical support center on the ground and played back or used for follow-up work through a analysis tool. During a flight mission, there are tens of thousands of detection objects within an hour in KADIZ (Korea air defense identification zone). In contrast, in TSD (tactical situation display), which displays a map when using the analysis tool, all detected objects are expressed as symbols. The increase in display symbols has a significant impact on the TSD image updating and consequently interferes with the smooth operation of operators. In this paper, we propose applying multiple threads and multiple layers to improve the performance of existing TSD. And the performance improvement is proven through the execution results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.163-170
• /
• 2011

Applicability of regenerative cooling in 2,500 N-class bipropellant thruster using hydrogen peroxide and kerosene was considered for improvement performance and application in various missions. Calculation was performed by one dimensional approach using hydrogen peroxide as a coolant. In designed regenerative cooling thruster, heat flux at nozzle throat was estimated at 18 ~ 20 $MW/m^2$. Designed cooling channel width and height were 2.5 mm and 0.5 mm, respectively. Based on designed cooling channel configuration, flat plate model was manufactured and tested for estimation of pressure drop in cooling channel, and CFD analysis was compared with the test result. The maximum error between CFD analysis and experimental result was approximately 13% and average error was approximately 5%.

• Journal of the Korean Geographical Society
• /
• v.51 no.1
• /
• pp.57-75
• /
• 2016

University has various resources such as intellectual human resource, spatial resource and facilities, and economic resource. At the same time, universities are, in general, found upon fundamental mission of public service, as well as teaching and research. Recently in Korea, it has been argued that we should make use of such resource of universities in the process of urban regeneration through university-community partnership. Yet, these arguments are lack of concreteness: 'which' kind of resource for 'what' kind of problem, and 'how'. Therefore, this research examined the case of university-community partnership in Japan and tried to find of some implications to Korean society. The reason for examining Japanese case is because Japan has experienced similar problems that Korea face such as aging population, decrease in the number of student, deteriorations of existing urban area; there are respectable amount of similarities between Japan and Korea in political, social and economic context; and because Japan has proceeded regeneration of communities through university-community partnerships.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.40-48
• /
• 2016

Micro-vibration induced by on-board appendages that have mechanical moving parts has always been treated as an useless objective that has to be isolated, in order to comply with a high-resolution mission requirement of the observation satellite. In this study, we proposed a tuned mass damper energy harvester combined with a conventional passive vibration isolator for exhibiting dual functions of both electrical energy harvesting and micro-vibration isolation. The feasibility of the proposed dual-function complex system has been demonstrated through the comparison with numerical simulations, based on the results of basic characteristic tests, and experiments of the harvested power and micro-vibration.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.4
• /
• pp.77-84
• /
• 2015

Recently, as the needs for eco-friendly aero propulsion system increase gradually, many study works have been conducted to develop the hybrid propulsion system for High Altitude Long Endurance(HALE) UAV. In this study, we analyzed both suitable energy distribution and management methodology among the total energy collected from solar cell and the total required energy of aerial vehicle and required energy of the regenerative fuel cell(RFC) for driving in the night time and optimized the energy balance mechanism based on the ascribed mission profile.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.81-88
• /
• 2024

The payload BioCabinet of CAS500-3 is designed for 3D stem cell differentiation, culture, and analysis utilizing bio 3D printing techniques in space. The 3D printing technique was initially developed for orbital use; however, it lacks separate validation for extreme launch vibration environments, necessitating a design that mitigates the launch load on the payload. This paper proposes a passive vibration isolator with a low-stiffness elastic support structure and high damping characteristics to reduce the launch loads affecting the BioCabinet. We explore the high-damping characteristics through the superelastic effects of SMA (Shape Memory Alloys) and a multi-layered structure incorporating viscoelastic tape. The effectiveness of the proposed vibration isolation system was confirmed via launch vibration tests on a qualification model.