• Defense and Technology
• /
• no.5 s.243
• /
• pp.68-79
• /
• 1999

수도방위사령부예하 향토사단 등을 비롯한 각급부대에는 "인명구조소대"가 편성되어 있다. 현재 장비가 도입되어 있어 어느 정도 장비운용이 가능하고 나름대로 내규를 정하여 임무수행 준비를 하고 있다. 그러나 이러한 조직이 제기능을 발휘하기 위해서는 사전에 유관기관의 재난관리 도상연습에 관련자를 참석시켜 효과적인 운용방법과 상황조치 요령을 습득하게 하는 것이 필요하다고 생각된다. 물론 해당부대에서는 장비운용 요령을 철저히 숙달해야 한다

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.871-877
• /
• 2021

Aircraft defects are important matters directly related to the operation of the aircraft and the life of the pilot. The defects in the mission software that occur during aircraft control seriously affect the pilot's mission performance and safety. Therefore, the organization in charge of aircraft development or software defects are reinforced in the process to identify and eliminate defects in the early stages of development, and a lot of labor and time are spent, but due to the nature of the mission software, strong functional coupling with other avionics and high complexity, so there are restrictions on the identification and removal of software defects through the existing test method. This study analyzes the effect of securing mission software integrity and reducing test cost through data integrity verification by developing a tool that automates the verification of expected value of feedback data among communication data of mission computer interlocking equipment.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.46.4-47
• /
• 2009

인공위성은 지상에서 설계 제작된 후에 발사체에 탑재되어 궤도에 진입되어 위성에 부여된 고유임무를 수행하게 된다. 위성체가 임무를 수행하는 우주공간은 고진공 환경과 태양 복사열에 의한 고온 환경 및 극저온이 반복되는 가혹한 환경으로 특징지어진다. 때때로 위성체는 이러한 가혹한 우주환경의 영향으로 인해 주요 부품의 기능장애가 초래되기도 하며 이는 결국 임무의 실패로 이어지도 한다. 따라서 고진공과 극저온 환경으로 일컬어지는 우주환경을 지상에서 모사하여 위성체의 안정성 및 신뢰성을 시험하기 위해서 열진공 시험장비를 이용한 열진공시험을 수행한다. 한국항공우주연구원에서는 인공위성의 탑재체인 광학카메라의 국산화 개발을 위하여 우주공간의 고진공과 극저온 상태를 모사할 수 있는 $\varphi4m\timesL10m$ 규모의 광학탑재체 전용 열진공챔버를 국산화 제작하였다. 관측 위성용 광학카메라는 초고정밀 장비로서, 이를 테스트하기 위한 광학탑재체용 진공챔버는 특히 진동환경에 매우 민감한 하여 10-7 grms 이하의 진동레벨을 허용하고 있다. 그러나 진공용기는 지진 및 외부 환경으로부터의 시스템외부진동과 진공펌프 및 기타 장비들로부터의 내부 진동환경에 항상 노출되어 있으며, 가진 주파수가 구조물 자체의 고유진동수와 일치될 경우 공진이 발생하여 시스템에 큰 영향을 미칠 수 있으므로, 외부 진동 및 챔버 자체 진동이 광학계에 전달되지 않도록 진동차단장치가 필요하다. 이 논문에서는 광학탑재체 궤도환경시험용 챔버에 대한 진동차단장치의 개발 및 활용 예를 논의하고자 한다.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.133-143
• /
• 2023

This paper describes the system integration laboratory's requirement analysis, implementation, and verification for multiple-scenario unmanned aerial vehicle operation and control technology using a manned rotorcraft for Manned-Unmanned Teaming. System integration laboratory consists of manned rotorcraft flight simulation, unmanned aerial vehicle flight and mission equipment simulation, ground control system simulation for unmanned aerial vehicle control and change in the control authority between the ground control system and manned rotorcraft, and operation and control system for mission plan's writing and transmission. Each implemented simulation verified the requirements through software and hardware integration test.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.627-628
• /
• 2010

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.225-232
• /
• 2013

In this paper, the study was conducted on the subject of the hybrid electric vehicles used by the military, and optimized the propulsion system for fuel economy considering energy supply to the mission equipments. For the analysis of the vehicles, a method based on the geometry and some assumptions was applied with basic vehicle dynamics. The sources of energy supply in the military hybrid electric vehicles are an engine, a battery and an ultra-capacitor. The optimal operation point among an engine, a battery and an ultra-capacitor can be found by minimizing energy consumption of driving power train and mission equipments. In the study, it was possible to find the optimal propulsion system by comparing fuel efficiency of the vehicles during the driving cycle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.357-360
• /
• 2011

On the matter in line with NCW(Network Centric Warfare) and information age, the military is on an efficient-expanding trend as sharing with status and information promptly through the various and complex exchange of messages and the phone communication between operators, using a highly efficient operating console. The recording devices that record an operational situation to plan a new operation through the mission analysis and result reviews after finishing military operation or training are developed and operated. Recording method is classified into two groups. one is the recording of display shots, another is the recording of an exchange of messages. This study proposes the new data-oriented recording method to reduce the readiness time of replay and the improvement scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.451-458
• /
• 2019

Reliability in the course of weapons system development and operation is a key measure of the ability of a system to perform the required functions under specified conditions over a specified period of time, and the mission confidence for the assessment of mission fulfillment is an important indicator of victory or defeat in a battle. Mission reliability indicates the probability that a given task will succeed or fail in an event or environmental situation over a given period of time. The existing mission reliability was calculated after creating a confidence blow map with only physical connections based on the mission. However, as modern weapons systems evolve and advance, the related equipment structure becomes increasingly complex, making it impossible to express mission relevance when mission classification is required based on functional or physical connections. In this study, the mission reliability was calculated for a gun control system, which is part of a ship's combat system, by expressing the association between the physical and functional structures using the design structure matrix technique and the interface matrix technique. We expect the study results to be used as verification data for mission reliability.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.51-59
• /
• 2018

The Multi-Mission Unmanned Surface Vehicle(MMUSV), which is manufactured using glass Fiber Reinforced Plastic(FRP) material, is designed to perform a surveillance and reconnaissance on the sea. Various navigation sensors, such as RADAR, RIDAR, camera, are mounted on a mast to perform an autonomous navigation. And a dummy gun is mounted on the deck of the MMUSV for a target tracking and disposal. It is necessary to analyze a strength for structures mounted on the deck because the MMUSV performs missions under a severe sea state. In this paper, a strength analysis of the mast structure is performed on static loads and lateral external loads to verify an adequacy of the designed mast through a series of simulations. Based on the results of captive model tests, a strength analysis for a heave motion of the mast structure is conducted using a simulation tool. Also a simulation and fatigue test for a mounting part between the MMUSV and the dummy gun are performed using a specimen. The simulation and test results are represented that a structure of the mast and mounting part of the dummy gun are appropriately designed.he impact amount are performed through simulation and experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.935-943
• /
• 2020

This paper presents a methodology for evaluating suitability of a manned-unmanned aerial vehicle team for a complicated mission. The study identified vehicle performance, equipment performance and level of autonomy as the key factors that affect the mission effectiveness. A manned and an unmanned aircraft were compared, and their performance was quantized in these respects. SEAD was chosen as a representative manned-unmanned team mission. The SEAD mission was broken down to a sequence of tasks. Mission experts evaluated the importance of each mark item for the mission legs. Combining the results showed proper type of aircraft for each leg depending on the complexity, safety, and importance of the task. Finally, the whole mission plan was laid out as a time-based sequence which alleviate pilot workload significantly.