• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.11-18
• /
• 2024

Recently, there have been attempts to claim the hair moisturizing effect for a hair care product, however there has not yet been an official evaluation method because heating temperature for hair has not been established. This study was conducted to establish a quantitative evaluation for hair water content. In order to observe the behavior of water inside hair, heat was applied to hair with various temperatures using thermogravimetric dry residue. As the heating temperature increased, the amount of moisture released from the hair increased. As a result of evaluating hair using a differential scanning calorimeter (DSC), a unique phenomenon in which a rapid endothermic reaction occurs around 75 ℃ was observed. This phenomenon was also observed in different ethnic hair. In hair that damaged the hair cuticle barrier with oxidation and heat, this rapidly rising endothermic reaction temperature occurred at 77 ℃, which was slightly higher, and 73 ℃ was observed when this hair was applied with polar oil, conditioning polymer, or keratin protein. To determine how this reaction affects the hair surface, friction test was performed using an atomic force microscope. When heated above 75 ℃, cuticle friction increased, however when heated above 90 ℃, there was no change in hair cuticle friction. Finally, it was confirmed that around 75 ℃ is the critical temperature at which desorption of water bound to the hair occurs. It is suggested that a heating temperature of 75 ℃ is the optimal temperature for detecting and quantifying the moisture content of hair, and that approximately 10% detected at 75 ℃ can be a standard value for hair moisture content.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.370-374
• /
• 1994

The effect of water activity(Aw) and storage temperature on retrogradation of pregelatinized corn starch was investigated at various temperature of $4^{\circ}C$, $20^{\circ}C$ and $30^{\circ}C$. Samples stored at different water activity, i.e., 0.43, 0.52, 0.75, 0.83, 0.88 and 0.93 by means of saturated salt solutions. The rate of retrogradation was determines. by enzymic digestibility, and evaluated by Avrami equation. The degree of retrogradation during storage showed a great difference around Aw 0.8. At Aw 0.52 and 0.75 at all temperatures, retrogradation occurred slightly. The effect of water activity on retrogradation was much greater at $4^{\circ}C$ than 300. And at Aw 0.43, the degree of retrogradation after 3-week storage was smaller than 3.9%. The critical water activity of retrogradation was inferred as Aw 0.43. At each temperature, the degrees of retrogradation of gelatinized corn starch after 24-day storage were 30% at Aw 0.8 and Aw 0.9, and greater than 50% at the Aw above 0.9. At Aw below 0.8 the degree of retrogradation was about 20%. The rate constants of retrogradation according to Aw showed small differences at $20^{\circ}C$ and $30^{\circ}C$, but showed a great difference at $4^{\circ}C$. The value of exponent of Avrami was 1.0 regardless of temperature and water activity. And the rate constants of retrogradation increased with increasing Aw, but decreased with increasing temperature.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.238-245
• /
• 1999

Antioxidative effects of the water or ethanol extracts from Rhus verniciflua Stokes (RVS) were measured by protection against hydroxyl radicals in mouse brain tissue culture. In the water extracts from RVS, cell viabilities were estimated 60.0, 66.0, 72.0, 84.0 and 90.0% at addition of 1, 2, 4, 7 and $10{\mu}L$, respectively, compared with GO (20 mU/mL) alone. The cell viability in the ethanol extracts was similarly with water extracts. In the antitumor effects, the results showed that percentages of the HeLa cell death were approximately 24% for 12 hrs, 57% for 48 hrs at addition of 10%/well ethanol extracts respectively. To know inhibition of tumor growth, in vivo, mice (BALB/c) were inoculated with 0.25 mL CT-26 $(1{\times}10^6\;cells/mL)$ subcutaneously. After the generation of tumor, the results of RVS extracts (ethanol, water) injection showed generally that the tumor size in BALB/c was reduced. For physicochemical characterization of the RVS extracts, purified substances of water or ethanol extracts were analized with SDS-PAGE and ICP spectrometer. In electrophoresis, gel showed 2 bands (210, 230 KDa). The results of ICP verified that RVS extracts contain $Cu^{2+}$ in both samples. Conclusively, this substance might be a laccase which has a biological effective function, as a natural bioactive substance.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.30-44
• /
• 2001

In this study limnological characteristics of Lake Juam was surveyed from June 1993 to May 1994 in order to provides important information regarding water resources. Secchi disc transparency, epilimnetic chlorophyll a (chi-a), total nitrogen (TN), total phosphorus (TP) concentration and primary productivity were in the range of $2.0{\sim}4.5\;m$, $0.9{\sim}13.6\;mgChl/m^3$, 0.78$\{sim}$2.32 mgN/l, $11{\sim}56\;mgP/m^3$, $270{\sim}2.160\;mgCm^{-2}\;day^{-1}$, respectively. On the basis of TP, Chl-a and Secchi disc depth, the trophic state of Lake Juam can be classied as mesotrophic lake. The phosphorus inputs from non-point sources are concentrated in heavy rain episodes during the monsoon season. As a result, phosphorus concentration are higher in summer than in winter. TP loading from the watershed were estimated to be $0.9\;gPm^{-2}yr^{-1}$, which correspond to a boundary of the critical loading ($1.0\;gPm^{-2}yr^{-1}$) for eutrophication. From the results of the algal assay, both phosphous and nitrogen act as limiting nutrients in algal growth. The seasonal succession of phytoplankton community structure in Lake Juam was similar to that observed in other temperate lakes. Diatoms (Asterionella formosa and Aulacoseira granulate var. angustissima)fujacofeira BraHuJafa uar. aHgusHrsiaia) weredominant in spring and winter, cyanobacteria) were dominant in warm season. The organic carbon, nitrogen and phosphorus content of lake sediment were $9.5{\sim}14.0\;mgC/g$, $1.01{\sim}1.82\;mgN/g$ and $0.51{\sim}0.65\;mgP/g$, respectively. The allochthonous organic carbon loading from the watershed and autochthonous organic carbon loading by primary production of phytoplankton were determined to be 1,122 tC/yr and 6,718 tC/yr, respectively. To prevent eutrophication of Lake Juam, nutrient management of watershed should be focus on reduction of fertilizer application, proper treatment of manure, and conservation of topsoil as well as point source.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.111-124
• /
• 2010

To monitor the environment of land surface change is considered as an important research field since those parameters are related with land use, climate change, meteorological study, agriculture modulation, surface energy balance, and surface environment system. For the change detection, many different methods have been presented for distributing more detailed information with various tools from ground based measurement to satellite multi-spectral sensor. Recently, using high resolution satellite data is considered the most efficient way to monitor extensive land environmental system especially for higher spatial and temporal resolution. In this study, we use two different spatial resolution satellites; the one is SPOT/VEGETATION with 1 km spatial resolution to detect coarse resolution of the area change and determine objective threshold. The other is Landsat satellite having high resolution to figure out detailed land environmental change. According to their spatial resolution, they show different observation characteristics such as repeat cycle, and the global coverage. By correlating two kinds of satellites, we can detect land surface change from mid resolution to high resolution. The K-mean clustering algorithm is applied to detect changed area with two different temporal images. When using solar spectral band, there are complicate surface reflectance scattering characteristics which make surface change detection difficult. That effect would be leading serious problems when interpreting surface characteristics. For example, in spite of constant their own surface reflectance value, it could be changed according to solar, and sensor relative observation location. To reduce those affects, in this study, long-term Normalized Difference Vegetation Index (NDVI) with solar spectral channels performed for atmospheric and bi-directional correction from SPOT/VEGETATION data are utilized to offer objective threshold value for detecting land surface change, since that NDVI has less sensitivity for solar geometry than solar channel. The surface change detection based on long-term NDVI shows improved results than when only using Landsat.

• Journal of KIISE:Software and Applications
• /
• v.30 no.5_6
• /
• pp.444-453
• /
• 2003

Recently, a great interest of bio-technology(BT) is concentrated and the image analysis technique for electrophoresis gels is highly requested to analyze genetic information or to look for some new bio-activation materials. For this purpose, the location and quantity of each band in a lane should be measured. In most of existing techniques, the approach of peak searching in a profile of a lane is used. But this peak is improper as the representative of a band, because its location does not correspond to that of the brightest pixel or the center of gravity. Also, it is improper to measure band quantity in most of these approaches because various enhancement processes are commonly applied to original images to extract peaks easily. In this paper, we adopt an approach to measure accumulated brightness as a band quantity in each band region, which Is extracted by not using any process of changing relative brightness, and the gravity center of the region is calculated as a band location. Actually, we first extract lanes with an entropy-based threshold calculated on a gel-image histogram. And then, three other methods are proposed and applied to extract bands. In the MER method, peaks and valleys are searched on a vertical search line by which each lane is bisected. And the minimum enclosing rectangle of each band is set between successive two valleys. On the other hand, in the RG-1 method, each band is extracted by using region growing with a peak as a seed, separating overlapped neighbor bands. In the RG-2 method, peaks and valleys are searched on two vertical lines by which each lane is trisected, and the left and right peaks nay be paired up if they seem to belong to the same band, and then each band region is grown up with a peak or both peaks if exist. To compare above three methods, we have measured the location and amount of bands. As a result, the average errors in band location of MER, RG-1, and RG-2 were 6%, 3%, and 1%, respectively, when the lane length is normalized to a unit value. And the average errors in band amount were 8%, 5%, and 2%, respectively, when the sum of band amount is normalized to a unit value. In conclusion, RG-2 was shown to be more reliable in the accuracy of measuring the location and amount of bands.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.223-232
• /
• 1998

The main experiment related to this report was undertaken to assess the effects of two rates of $Ca(OH)_2$ (0, 250 kg/10a only at establishment) and five rates of $N-P_20_5-K_20$ (0-0-0, 0-10-10, 6-15-15, 12-20-20, 24-25-20 kg/10a/year) on the pasture establishment, forage yield and quality, and vegetation etc. After this 10-year main e experiment pasture had been used to assess the effects of the above treaments on the soil characteristics in oversown hilly pasture of a grass-clover sward. soil properties of mutual ratios of exchangeable cations at d different soil depth, and the visible characteristics of soil conservation obtained are summarized as follows; 1. Compared with the properties of soil fertility and the level for the likelihood grass tetany, the mutual ratios of exchangeable cations in soils; Ca:Mg:K(% of CEC), Ca:Mg:K(K=I), $K/\sqrt{Ca+Mg}$, Mg/K, K/Mg, and Ca/Mg, were discussed at different soil depth. Before and after experiment, these ratios were generally unbalance and unsuitable, and were rather worsened in the order of Mg>Ca>K under the conditions of liming and NPK fertilization without Mg. 2. The ratios of Ca and Ca/Mg were increaby liming, whereas it of $K/\sqrt{Ca+Mg}$ was redused. The ratios of K and $K/\sqrt{Ca+Mg}$ in control and the heavy fertillization of NPK(especially N) were rather lowered than those in the low and medium fertilizations of NPK. 3. The prperties of consevation were closely related with the forage productivity/vegetation rates, as affected by liming and the application rates of NPK. In control of NPK, It was shown to be the worst soil conservation; severly eroded(3rd grade), exporsure of subsoil, redish brown in soil colour, and 18.8% of cobble and stony in covering rate. 4. The improvement of soil conservation was greatly enhanced by increasing the NPK rate. In the medium and heavy fertilizations of NPK, it was shown to be the favorable improvement of soil conservation; slightly eroded(lst grade), covered with humus layer/grass residues in surface soil, dark brown in surface soil colour, under 1% of cobble and stony in covering rate. The increasing of legume yield/vegetation rate by liming rather enhanced the soil conservation of grassland.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.375-380
• /
• 2003

This study was carried out 1) to investigate the pH effect on solubilization of phenanthrene by biosurfactant in aqueous system and 2) to evaluate the pH effect on the biodegradation rate of phenanthrene in the presence and the absence of the biosurfactant by phenanthrene degraders. Tween 80, which is a chemically synthesized surfactant, showed greater solubilizing capacity than rhamnolipid. The solubilization capacity can be expressed as a MSR(molar solubilization ratio=moles of organic compounds solubilized per mole of surfactant). The calculated MSR of Tween 80 and rhamnolipid were 0.1449 and 0.0425 respectively. The kinetic study of phenanthrene solubilization by rhamnolipid showed that solubilization mechanism could reach equilibrium within 24 hours. Addition of 240 ppm rhamnolipid solution, which concentration is 4.3 times of Critical Micelle Concentration(CMC), caused 9 times solubility enhancement compared to water solubility. The highest solubilities were detected around a pH range of 4.5-5.5. Changes in apparent solubility with the changes in pH are possibly related to the fact that the rhamnolipid, an anionic surfactant, can form different structures depending on the pH. Two biodegradation experiments were performed in the absence and the presence of rhamnolipid, with the cell growth investigated using a spread plate method. The specific growth rates at pH 6 and 7 were higher than at the other pH, and the HPLC analysis data, for the total phenanthrene loss, confirmed the trends in the $\mu$(specific growth rate) values. In presence of rhamnolipid, maximum $\mu$ values shifted from around pH 5 which showed maximum enhancement of solubility in the abiotic experiment, compared to the $\mu$ values obtained without the biosurfactant. In this study, the increase in the observed specific grow rate(1.44 times) was not as high as the increase in solubilization(5 times). This was supported by the fact all the solubilized phenanthrene is not bioavailable to microorganisms.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1248-1254
• /
• 1997

To measure antioxidative activities, the various extracts from RVS (Rhus Verniciflua Stokes) were tried out with either DPPH or thiocyanate method. Also we used the GO (Glucose Oxidase) 20 mU/mL hydroxyl radical system in mouse whole brain cell culture. Chloroform, n-hexane or ethanol were used as extract solutions which had different polarity respectively. In DPPH and thiocyanate method, the antioxidative activities of the crude ethanol extracts were stronger than other extracts. The crude ethanol extracts were fractionated 5 peaks by glass column. Among of them, antioxidative activity of peak II $(P_{II})$ was shown stronger than other fractions, a little for peak III $(P_{III})$ and peak IV $(P_{IV})$, and none for peak I $(P_I)$ and Peak V $(P_V)$. In the antioxidative effects of crude ethanol extracts (30 mg/mL), cell viabilities were evaluated $1\;{\mu}L\;(297\;{\mu}g/mL)$, $2\;{\mu}L\;(588\;{\mu}g/mL)$ of crude ethanol extracts 59%, 68% respectively. $10\;{\mu}L\;(2,727\;{\mu}g/mL)$ addition of crude ethanol extracts had 95% cell viabilities, 0.01% significant, comparing control. In addition, the compounds related to antioxidative effect of crude ethanol extract might be glycoproteins by means of SDS-PAGE. Comparison to antioxidative effects between several antioxidants (ascorbic acid, ${\alpha}-tocopherol$, catalase) $273\;{\mu}L/mL$ addition of crude ethanol extracts corresponds to $1\;{\mu}g/mL$ catalase in antioxidative effects.