• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.35-41
• /
• 2014

A rotordynamic analysis is performed for a turbopump of 7 ton class liquid rocket engine considering bearing housing structural flexibility. Stiffness and damping characteristics of ball bearings and pump noncontact seals are reflected in a rotordynamic model. A dynamic model of bearing housing with lumped mass and stiffness is also applied to the rotordynamic analysis. Rotor critical speed and onset speed of instability are predicted from synchronous rotor mass unbalance response and complex eigenvalue analyses. The bearing housing structural flexibility effect on rotordynamic characteristics is investigated for both of bearing loaded and unloaded conditions respectively. From the numerical analysis, it is found that the effect of the housing structural flexibility significantly reduces the rotor critical speed and onset speed of instability.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.205-210
• /
• 2007

A LOX pump rotordynamic design was performed for a 75 ton thrust liquid rocket engine. Axial positions of an inducer, an impeller and bearings on a shaft are decided on the basis of the experience achieved by previously developed turbopump which has the similar layout. The result of pump hydraulic design was reflected in the present study to decide axial length of the inducer and impeller. A distance from the rear bearing to the impeller was considered as a design parameter for load distribution of the bearings. Asynchronous eigenvalue analysis was performed as a function of rotating speeds and bearing stiffness to investigate critical speed of the LOX pump. From the numerical analysis, it is found that the LOX pump with the proper bearing loads safely operates as a sub-critical rotor of which critical speed is high enough compared to the operating speed 11,000 rpm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.127-134
• /
• 2008

The aerodynamically excited vibration and natural frequency of rotating disks are analytically studied in this paper. The theoretical analysis uses a fluid-structure model where the aerodynamic effects are represented in terms of elastic, lift and drag forces. The explicit expressions on natural frequencies of the air coupled disk are obtained as functions of the aerodynamic coefficients. for the three cases where the disk rotates in three different cases (in vacuum, in open air without enclosure, and close to rigid wall). The theoretical results give that the natural frequencies of rotating disks in air are smaller than those in vacuum, because the effect of the added fluid mass decreases the frequencies. This paper also proposes an analytical method to predict the flutter speed of a rotating disk.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.135-142
• /
• 2008

Experimental studies on the aerodynamic coupling effect on natural frequencies, critical speed and flutter instability of rotating disks are investigated in this paper. The theoretical analysis uses a fluid-structure model where the aerodynamic effects are represented in terms of elastic, lift and damping and stiffness components. The experiments performed using a vacuum chamber and ASMO/DVD disks rotating in vacuum, open and enclosure in several gaps with stationary wall give three main results. One is that the aerodynamic effect by the surrounding air reduces the natural frequencies and critical speeds of the vibration modes. The second is that natural frequency of disks rotating in open air is larger than that in enclosure. Finally, it is shown that the disk vibration is reduced as the gap between the disk and the rigid wall decreases.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.263-268
• /
• 2002

본 연구는 고추분쇄용 세라믹 롤 분쇄기를 이용하여 고춧가루 생산시, 분쇄효율을 향상시키고자 기존의 롤 분쇄속도 40rpm(0.352m/s)에서 80rpm(0.704%)으로 증가시키고, 기존의 롤 회전비 2:1에서 5:1로 증가시켜 고추분쇄시 전단력 증가로 분쇄능을 향상시켰고, 연구 내용의 주요 결과를 요약하면 다음과 같다. 1. 세라믹치형롤 분쇄속도 40rpm(0.352m/s)에서는 롤 회전비 2:1에서 1,190$\mu\textrm{m}$ 입자가 32.7%, 590$\mu\textrm{m}$ 입자가 19.7%였고, 롤 회전비를 5:1로 증가시 590$\mu\textrm{m}$ 입자가 30.9%, 420$\mu\textrm{m}$ 입자가 17.2%로 중간 미분쇄 영역의 분포가 증가하여 미분쇄 효율이 향상됨을 알 수 있었다. 2. 분쇄물의 롤 통과횟수에 따른 분쇄능은 세라믹치형롤 모두 분쇄속도 80rpm(0.704m/s)에서 분쇄물의 미분쇄능이 향상되었고, 분쇄생성물의 임계처리 횟수가 3~4차임을 분석할 수 있었다. 3. 보통 고춧가루를 생산하는데 분쇄속도 40rpm(0.352m/s), 80rpm(0.704m/s), 두 롤의 회전비 2:1, 3:1, 4:1하에서는 생산되지 않았으나, 롤 회전비 5:1에서는 분쇄속도 40rpm(0.352m/s)일 경우 7차 분쇄후에, 분쇄속도 80rpm(0.704m/s)일 경우 5차분쇄후에 생성되어 분쇄처리횟수가 2회정도 단축되어 전단력 증가로 인하여 분쇄능이 향상된 것으로 분석되었다. 4. 기존의 고춧가루 분쇄조건인 분쇄속도 40rpm(0.352m/s), 롤 회전비 2:1보다 본 연구에서 개발한 분쇄속도 80rpm(0.704m/s), 롤 회전비 5:1인 분쇄조건이, 분쇄처리 횟수 단축 등이 분석됨으로서 섬유질이 많이 포함된 고춧가루 등의 재료가공 분쇄기술이 향상된 것으로 분석되었다.. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$0.24(100%)에 비하여 I3C 저농도 투여 실험군(Group 1; 0.85$\pm$0.23; 61%, P<0.01), 그리고 I3C 고농도 투여 실험군(Group 2 ; 1.32$\pm$0.29 ; 94%)의 순으로 감소하였다. 선종의 크기별 종양의 발생개수의

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.171-176
• /
• 2002

이 논문은 MVR(Machinery Vapor Recompressor) Impeller Blade의 파손으로 발생한 사고원인 조사Um 관한 것이다 MVR의 고장의 원인을 밝히기 위해서 육안 분석(visual examination), 실체현미경 분석(Stereoscopic examination), SEM 분석 (SEM examination)을 한 결과 주조결함으로 인한 Surface Crack이 장기간 지속되어 Initial Crack이 생성된 뒤에 이 부위에 응력이 집중되면서 Fatigue Crack이 임계 Crack 길이까지 진행되었다. 여기에 Impeller 회전속도의 상승으로 인한 과부하가 부가되어 MVR의 Blade가 파손된 것을 알 수 있었다.(중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.585-589
• /
• 1999

In order to grow $Bi_4Ge_3O_{12}$ crystals by the Czochralski method equipped with the auto-diameter control system, we used the resistance heater of our own design. We measure the temperature gradients under-arious thermal configurations. The relation between the critical rotation rate corresponding to the flat interface and the temperature gadient was investigated, and the importance of the axial temperature gradient was pointed out. The results from this work were compared with those obtained by other authors when RF heating was used. The optimal conditions for the crystal growth were determined as follows; under $O_2$ atmosphere with the pulling rate fixed at 2 mm/hr, rotation rate changed from 30 to 23 rpm as the crystal growth proceeded, radial and axial temperature gradients were 50 and $40^{\circ}C$/cm near melts respectively, and the composition was chemically stoichiometric.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.163-168
• /
• 1989

In this paper, Rayleigh wave velocity has been measured by detecting the backscattered signal generating near the Rayleigh critical angle in the elastic medium. The rotating system has been made for the measurment of Rayleigh angle. It has been shown that the measured velocity for the stainless steel, brass aluminum, copper has been good agreement with the theoretical value. The method of non-destructive evaluation using backscattering signal has been presented and the c-scan acoustic image for internal of IC sample has been displayed.

• Journal of KSNVE
• /
• v.11 no.3
• /
• pp.437-442
• /
• 2001

In this study, the fracture phenomena of optical disks are discussed by theoretical and experimental approaches and then some recommendations are presented to prevent the fracture. Linear equations of motion are discretized by using the Galerkin approximation. From the discretized equations, the dynamic responses are computed by the generalized- time integration method. As a fracture criterion for optical disks, the critical crack length is presented. From experimental methods, the fracture procedure is analyzed. The fracture occurs when disks have crack on the inner radius of the disks. Since the crack growth and the fracture result from the stress concentration on the tip of the crack, a measure should be taken to overcome the stress concentration. This problem can be resolved by the structural modification of a disk. This study proposes 3 types of improved optical disks.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.537-544
• /
• 2009

In order to increase the critical speed of rotating disks of which functional material could not be changed such as in optical and magnetic data storage disks, a new disk with a rim reinforced by composite material is proposed and its concept is verified by numerical analysis. Stress distributions are found for the rotating disk composed of two annular disks of which materials are isotropic inside and orthotropic outside. Dynamic equation is formulated in order to calculate the natural frequency and critical speed. For the solution of lateral vibration, a rotational symmertry condition is applied along circumferential direction and a finite element interpolation with Hermite polynomial is performed along the radial direction to obtain a proper solution. According to the results, reinforcing a disk at rim makes critical speeds drastically increased, and induces a buckling phenomenon in mode (0,0) which occurs over the lowest critical speed.