• Title/Summary/Keyword: 임계전압

Search Result 136, Processing Time 0.039 seconds

The Effect of HiPIMS Conditions on Microstructure of Carbon Thin Film (카본 박막의 미세조직에 미치는 HiPIMS 공정조건의 영향)

  • Yang, Jae Woong
    • Journal of the Korean Applied Science and Technology
    • /
    • v.34 no.4
    • /
    • pp.1017-1024
    • /
    • 2017
  • Carbon thin films were deposited by HiPIMS(High Power Impulse Magnetron Sputtering). The properties and microstructures of carbon thin film were investigated with power, pressure, bias voltage and duty cycle. As the HiPIMS power increased, the deposition thickness increased and the surface tended to be rough. The increase in pressure also tended to make the surface rough, but the deposition thickness was not proportional to the pressure. As the bias voltage increased, the surface roughness became worse, the deposition thickness increased and then decreased from the critical bias voltage. Changes in the duty cycle have caused problems such as arcing, which is affected by the chamber structure and the size of the target. The $sp^2/sp^3$ fractions of thin films were estimated by XPS and it was confirmed that the fraction of thin films made by HiPIMS were larger than the fraction of thin films made by DC sputtering.

A Controller Study and Design for Precise Piezo Actuator (정밀 위치제어를 위한 Piezo Actuator의 제어기 연구 및 제작)

  • Lee, Se-Rin;Kim, Cheol-Oh;Lim, Kye-Young
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.1764-1765
    • /
    • 2011
  • 피에조 액추에이터는 세라믹 소재의 압전 특성을 이용한 전기식 액추에이터로, 이에 사용되어지는 세라믹스는 전자분야의 기초재료로 다양한 연구가 이루어지고 있다. 통신기기, 의료기기, 초정밀 액추에이터, 초음파 모터 등 각종 정밀 센서와 측정 계측기기와 같이 가정용에서부터 첨단 기술 분야 까지 광범위하게 이루어지고 있다. 이와 같이 첨단 기술 분야에 각광 받고 있는 압전 소재 제품중, 본 논문에서는 국내 개발 및 시장 진입이 어려운 초정밀 액추에이터를 선택 하였으며, 전압 이송소자를 활용하기 위한 연구소단위의 연구내용을 기술하였다. 즉, 정밀 제어에 영향을 미치는 피에조의 히스테리시스를 포함한 개루프 특성을 모델링하고, 컴퓨터 시뮬레이션으로 액추에이터의 동작을 검증한 후 PID제어기를 적용하여, 이에 따른 결과와 함께 제어기를 제작하였다.

  • PDF

Implementation of DMX512 Receiver using Constant Current LED Driver (정전류 LED 구동방식을 사용한 DMX512 수신 장치 제작)

  • Kim, Cheol-Oh;Lim, Kye-Young
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2009.10a
    • /
    • pp.121-124
    • /
    • 2009
  • 전 세계적인 에너지 절약 정책에 대응하여 새로운 고효율 LED 및 드라이버 IC의 출시가 활발하다. 단색 또는 칼라 LED를 사용하여 경관조명, 무대조명, 음악분수 등에 많이 활용되는데 다양한 전압 및 LED 구동 방식 등에 따라 LED의 수명과 비용이 달라질 수 있다. 또한 LED의 밝기 및 색상 등을 조절하여 멋진 연출을 위해 마이크로컨트롤러의 사용이 필수적이고, 다수의 장치를 함께 연동하는 경우에는 이들을 통신으로 연결하여 사용하는데, 본 논문에서 조명 장치에 표준으로 많이 사용하는 DMX512 통신 프로토콜, 몇 가지 정전류 구동 방식에 대해서 살펴보고, 저가격의 마이크로컨트롤러를 사용하여 DMX512 수신 장치를 구현해 보았다.

  • PDF

Characteristics of an HTS Winding for a large current application (대전류 인가용 고온 초전도 권선의 특성 시험)

  • Hwang, Young-In;Lee, Seung-Wook;Kim, Woo-Seok;Lee, Ji-Kwang;Choi, Kyeong-Dal
    • Proceedings of the KIEE Conference
    • /
    • 2007.04c
    • /
    • pp.39-40
    • /
    • 2007
  • 대용량 고온 초전도 변압기에 적용하기 위한 1,500 A 급 초전도 병렬 선재를 제작하여 특성시험을 하였다. 병렬 선재는 21가닥의 BSCCO 선재를 250 mm 간격으로 전위한 뢰벨(Roebel)바 형태로 제작하였다. 특성시험을 통해 병렬 선재 제작기술을 확보하였다. 24 가닥의 병렬 선재를 이용하여 전압 분배나 절연 특성이 좋아 고전압 변압기에 채택할 수 있는 1,000 A급 연속 디스크 권선을 제작하였다. 전위를 고려하여 만든 병렬 선재로 제작한 1,000 A급 연속 디스크 권선의 임계전류와 교류손실을 측정하였다.

  • PDF

Numerical Simulation of AlGaN/GaN HEMT (AlGaN/GaN HEMT의 수치해석 시뮬레이션 연구)

  • Ha, Min-Woo;Choi, Kangmin;Kwag, Jaewon
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1124-1125
    • /
    • 2015
  • 밴드-갭이 큰 반도체는 실리콘에 비하여 다양한 전기 물성 장점을 가져 고주파수 증폭 소자나 차세대 전력 반도체 소자로 각광을 받고 있다. 다양한 와이드 밴드-갭 반도체 중 AlGaN/GaN 이종접합 반도체는 채널의 높은 전도성과 높은 임계 전계로 인하여 우수한 전기적 특성을 가진다. 최근 발전된 수치해석 시뮬레이션을 이용하여 AlGaN/GaN 고전자 이동도 트랜지스터 (high-electron-mobility transistor, HEMT)의 설계연구를 진행하였다. AlGaN 장벽층의 두께가 증가할수록 채널의 전자 면 농도가 증가하도록 설계하였다. 또한 게이트 필드 플레이트 설계를 통하여 AlGaN/GaN HEMT의 역방향 전계 피크를 1개에서 2개로 증가시켜 항복전압을 368 V에서 최대 822 V로 개선하였다. 수렴문제를 개선한 수치해석 시뮬레이션은 RF power AlGaN/GaN HEMT의 설계에 유용하다.

  • PDF

A Study on the Propagation Phenomenon of Neural Stimulated Potential using Distributed Electrical Circuit (뉴런의 분포정수 회로화에 의한 자극전위의 전도현상 연구)

  • Che, Gyu-Shik
    • Journal of Advanced Navigation Technology
    • /
    • v.15 no.2
    • /
    • pp.256-263
    • /
    • 2011
  • The nerve impulse is induced by the stimulation of neuron or axon, and this stimulated voltage decays along the propagation distance and time if it is subtreshold potential. This behavior can be estimated using the electrical equivalent circuit because it is very similar to propagation phenomenon of electrical circuit to which Ohm's law is applied. Therefore, I calculated various biometric parameters of body, and then analyzed the propagation behavior of stimulated potential voltage using the distributed parameters of electrical circuit in this paper.

Superconducting property of ${YBa_2}({Cu_2.9}{N_0.1})_7-{\delta}$ (${YBa_2}({Cu_2.9}{N_0.1})_7-{\delta}$의 초전도 특성)

  • 한병성;한태희;황종선
    • Electrical & Electronic Materials
    • /
    • v.5 no.3
    • /
    • pp.278-283
    • /
    • 1992
  • 123 초전도체에 마그네틱 모멘트가 큰 Ni불순물을 도핑하여 제작한 $Y_{1}$ Ba(C $u_{2.9}$ $N_{0.1}$) $O_{7-{\delta}}$ 초전도체의 X-ray diffraction pattern, susceptibility, 온도변화등에 따른 전류-전압관계, 임계온도 등에 대하여 연구하였다. 제작된 시료는 매우 뚜렷한 orthorhombic 피크를 가진 123상을 나타내고 있었다. N=0.1의 시료에서는 적은 양의 Ni 불순물과 단면적인 무정형상태의 잘 반응된 YBa(Cu, Ni)$_{3}$ $O_{7-{\delta}}$의 orthorhombic구조를 나타내고 있다. 전반적인 실험 결과로 부터 Ni는 Y-Ba-Cu-O 초전도 시스템에서 초전도에 중요한 역할을 담당하지 않는다는 결론을 얻었다.얻었다.다.

  • PDF

절연매체로서의 $SF_{6}$가스

  • 곽영순
    • 전기의세계
    • /
    • v.29 no.6
    • /
    • pp.344-348
    • /
    • 1980
  • $SF_{6}$가스의 절연파괴특성 및 화학적특성에 관한 것을 종합해보면, 첫째, $SF_{6}$의 방전은 1개의 전자 avalanche중의 전자수가 임계치 Norit가 $10^{8}$정도에서 streamer에의 전이가 일어나므로서 이루어지며, 둘째, $SF_{6}$의 (.alpha.-.eta.)/.rho.와 E/.rho.의 관계는 .alpha.=.eta.근방에서 직선으로 상승되어 절연파괴에 극히 중요한 뜻을 가지며, 셋째, 두번째의 .alpha.=.eta.에 있어서의 구배는 보통의 기체보다 수 10배크기 때문에 최대전계를 부여하는 전극근방만이 공극의 방전개시를 지배하며, 넷째, 전기기구에 있어서 $SF_{6}$가스의 화학적변화의 energy원으로서는 arc, corona, 열을 들 수 있으며 특히 $SF_{6}$가스중과 공기중과의 내 Corona성을 구하기 위한 인가전압일내 Corona수명시간은 $SF_{6}$가스중이 공기중보다 길다는 것이다.

  • PDF

On-Line Calculation of the Critical Point of Voltage Collapse Based on Multiple Load Flow Solutions (다중조류계산을 이용한 전압붕괴 임계점의 On-Line 계산)

  • Nam, Hae-Kon;Kim, Dong-Jun
    • Proceedings of the KIEE Conference
    • /
    • 1993.07a
    • /
    • pp.134-136
    • /
    • 1993
  • This paper presents a novel and efficient method to calculate the critical point of voltage collapse. Conjugate gradient and modified Newton-Raphson methods are employed to calculate two pairs of multiple load flow solutions for two operating conditions, i.e., both +mode and -mode voltages for two loading conditions respectively. Then these four voltage magnitude-load data sets of the bus which is most susceptible to voltage collapse, are fitted to third order polynomial using Lagrangian interpolation in order to represent approximate nose curve (P-V curve). This nose curve locates first estimate of the critical point of voltage collapse. The procedure described above is repeated near the critical point and the new estimate will be very close to the critical point. The proposed method is tested for the eleven bus Klos-Kerner system, with good accuracy and fast computation time.

  • PDF

The Analysis of beam tile pattern properties of the base station array antenna (기지국 배열안테나의 빔틸트 패턴특성 분석)

  • Choe, Jeon-hwan;Lim, Gye-jae
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.3 no.4
    • /
    • pp.76-82
    • /
    • 2010
  • For the purpose of controlling the beam tilt angle of the base station sector array antenna, phase shifter is used. Phase angles of this antenna depending on the tilt angles are designed, and the patterns on the vertical and horizontal planes are simulated and analyzed for the evaluation of base station antenna. This analysis is used in the optimal design of base station antenna because of maximum cell coverage and incremented traffic capacity, decreased interference.

  • PDF