• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.152-160
• /
• 2013

The purpose of this study is to enhance the mechanical strength of specimens containing fly ash from fluidized bed type boiler, which the recycling rate will be eventually increased. Specimens containing fly ash in a certain portion were made and aged for 3, 14, and 28 days. Specimens were carbonated under the supercritical condition at $40^{\circ}C$. The carbonation process under the supercritical condition was performed to enhance the mechanical property of specimens by filling the voids and cracks existing inside cement specimen with $CaCO_3$ reactants. The additional aging effect after the supercritical carbonation process on mechanical strength of specimens was also investigated by comparing the compressive strength with and without 7 day extra aging. Under the supercritical condition and additional 7 day aging specimens were very effective for enhancement of mechanical strength and compressive strength increased by 44 %.

• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.95-105
• /
• 2008

In this paper, we propose the DAMMC(Distributed Authentication Model using Multi-level Cluster) for wireless sensor networks. The proposed model is that one cluster header in m-layer has a role of CA(Certificate Authority) but it just authenticates sensor nodes in lower layer for providing an efficient authentication without authenticating overhead among clusters. In here, the m-layer for authentication can be properly predefined by user in consideration of various network environments. And also, the DAMMC uses certificates based on the threshold cryptography scheme for more reliable configuration of WSN. Experimental results show that the cost of generation and reconfiguration certification are decreased but the security performance are increased compared to the existing method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.414-420
• /
• 1985

The melting phenomenal of the horizontal cylindrical ice-bar submerged in water are experimentally investigated for the temperature range from 2.5.deg. C to 15.deg. C. The shapes of the melting ice-bar are recorded by the Photo-elasticity Apparatus with modification of the test section. The shadowgraphs of the melting ice-bar show that water adjacent to the bar flows upward for the temperature range from 2.5.deg. C to 5.6.deg. C while above the temperature of 5.6.deg. C the flow is downward direction. The local and average Nusselt numbers become minimum at 5.6.deg. C which is considered as a critical temperature and the Nusselt numbers increase as temperature difference from the critical temperature increase.

• Solar Energy
• /
• v.19 no.3
• /
• pp.29-41
• /
• 1999

Three-dimensional natural convective heat transfer in a vertical channel with a protruding single module was investigated experimentally. The particular interest was in the removal of thermal energy from the module by convective heat transfer. Hence radiative and conductive heat losses were estimated by using thermocouples and heat flux sensor respectively. The flow fields in the channel were visualized by means of a smoke-method. Also, local temperatures were measured by thermocouples inside the channel, along the vertical wall and module surface. It is found that convective heat transfer was promoted at the lower comer of the module and was decreased at the upper comer due to a recirculation zone. A general correlation of the critical channel ratios was found as a function of Rayleigh number. For the range of $8.28{\times}10^3<Ra^*_c<3.48{\times}10^6$, a useful correlation for the mean Nusselt number was proposed as a function of modified channel Rayleigh number.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.303-303
• /
• 2013

표면에 부착된 나노/마이크로 입자는 다양한 분야에서 오염물질로 작용한다. 특히 형상이 미세하고 공정 단계가 복잡한 반도체 및 디스플레이 등의 전자 소자 공정에서 미치는 영향이 크다. 따라서 입자상 오염물질의 제거에 관하여 상용화된 습식 세정 방법이 다양하게 존재하지만 표면 손상, 화학 반응, 부산물, 세정 효율 등 여러 가지 문제점이 있어 새로운 세정 방법이 요구된다. 이에 건식 세정 방법, 그 중에서도 입자의 충돌을 통해 제거하는 방법인 에어로졸 세정, 필렛 세정 등이 개발되었으나 마이크로 크기로 생성되는 입자로 인하여 형상의 손상이 크다. 따라서 본 연구에서는 나노 단위로 기체/고체 혼합물만 생성하여 세정하는 가스 클러스터 세정 방법을 이용하여 이러한 문제점을 해결하고자 하였다. 클러스터 세정 장비를 이용한 표면 처리는 충돌에 의한 제거에 기반한다. 따라서 생성 및 가속되는 클러스터로부터 대상으로 전달되는 운동량의 정도가 세정 특성에 영향을 미치며 이는 생성되는 클러스터의 크기에 종속적이다. 생성 클러스터의 크기 분포는 분사 거리, 유량, 분사 각도, 노즐 냉각 온도 등의 변수에 관한 함수이다. 따라서 본 연구에서는 $CO_2$ 클러스터를 이용한 세정 특성을 정의 및 제어하기 위하여 생성되는 클러스터 특성에 관하여 이론적, 수치 해석적, 실험적 연구를 수행하였다. 먼저, $CO_2$의 물리적 특성 및 이를 이용한 특정 크기 오염 물질을 제거하는데 요구되는 임계 클러스터 크기 계산을 이론적으로 구하였다. 이는 오염물질의 부착력과 클러스터의 운동량 전달에 의한 제거력의 비교를 통해 이루어졌다. 두 번째로 클러스터 크기분포를 수치 해석적으로 예측하기 위하여 각 조건에 대하여 유동해석을 수행하고 이를 통해 구해진 노즐 내 기체의 냉각 속도를 GDE (General Dynamic Equation) 계산에 대입하여 구하였다. 마지막으로 PBMS(Particle Beam Mass Spectrometer)를 이용하여 실험적으로 클러스터 크기분포를 각 조건에 대하여 구할 수 있었다. 또한 크기 분포 경향에 대한 간접적 확인을 위하여 포토레지스트가 코팅된 웨이퍼에 클러스터의 충격으로 생성된 크레이터 크기의 경향을 분석하였다. 이와 같은 방법에 의하여 생성되는 클러스터는 노즐의 유량 증가, 온도 상승에 각각 비례하여 작아지는 것을 확인할 수 있었다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.8
• /
• pp.408-418
• /
• 2017

Supercritical carbon dioxide ($sCO_2$) power system is emerging technology because of its high cycle efficiency and compactness. Meanwhile, PCHE (Printed Circuit Heat Exchanger) is gaining attention in $sCO_2$ power system technology because PCHE with high pressure-resistance and larger heat transfer surface per unit volume is fundamentally needed. Thermo-fluidic characteristics of $sCO_2$ in the micro channel of PCHE should be investigated. In this study, heat transfer characteristics of $sCO_2$ of various inlet conditions and cross-sectional shapes of single micro channel were investigated experimentally. Experiment was conducted at supercritical state of higher than critical temperature and pressure. Test sections were made of copper and hydraulic diameter was 1 mm. Convective heat transfer coefficients were measured according to each interval of the channel and pressure drop was also measured. Convective heat transfer coefficients from experimental data were compared with existing correlation. In this study, using measured data, a new empirical correlation to predict near critical region heat transfer coefficient is developed and suggested. Test results of single channel will be used for design of PCHE.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.58-64
• /
• 2006

Smoke extraction in tunnel fire is investigated experimently with thermal model. The object is a immersed tunnel, of which the partial extraction system exists between the tubes. The model tunnel is measured 12 m long, 0.5 m wide and 0.35 m high. The fire is simulated to pool fire and the size corresponds to full scale fire of 5 MW based on Froude modeling. The performance of partial extraction system is determined under two ventilations, natural and longitudinal ones. The results show that compared with longitudinal ventilation, the smoke extraction efficiency of natural ventilation is increased about 30% because of smoke stratification in tunnel. Also the efficiency is identical to the iso-thermal model. The results will be help for activation of the ventilation system in emergency such as in the event of tunnel fires.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.554-560
• /
• 2021

CRUD (chalk river unidentified deposits) is a porous material deposited on the surface of nuclear fuel during nuclear power plant operation. The CRUD is composed of metal oxides, such as iron, nickel, and chromium. It is essential to investigate the effects of the CRUD layer on the wall heat transfer between the nuclear fuel surface and the coolant in the event of a nuclear accident. CRUD only negatively affects the temperature of the nuclear fuel due to heat resistance because the effects of the CRUD layer on two-phase boiling heat transfer are not considered. In this study, the physical property models for the porous CRUD layer were developed and implemented into the SPACE code. The effects of boiling heat transfer models on the peak cladding temperature and quenching were investigated by simulating a reflood experiment. The calculation results showed some positive effects of the CRUD layer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.627-635
• /
• 2021

The fire damage and structural performance of a steel-concrete composite superstructure under a highway bridge exposed to fire loading was evaluated. To enhance the accuracy and efficiency of the numerical analysis, a proposed fluid-structure interaction fire analysis method was implemented in Ansys Fluent and Ansys Mechanical. The temperature distribution and performance evaluation of the steel-concrete composite superstructure according to the vertical distance from the fire source to the bottom flange were evaluated using the proposed analysis method. From the analysis, the temperature of the concrete slab and the bottom flange of the steel-concrete composite superstructure exceeded the critical temperature. Also, when the vertical distance from the fire source was 13 m or greater, the fire damage of the steel-concrete composite superstructure was found to within a safe limit.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.859-867
• /
• 1997

In order to utilize the processing wastes of squid, chitosans were manufactured from the pens of domestic squid, Todarbdes pacificus and foreign squid, Ommastrephes bartrami and then, its rheological properties were studied. The amounts of nitrogen and minerals of the domestic squid pens were $11.4\%\;and\;0.1\%$ respectively, whereas those of its chitosan were $7.5\%\;and\;0.2\%$. In case of foreign squid pen and chitosan, the amounts of nitrogen and minerals were $12.1\%,\;0.8\%\;and\;7.8\%,\;0.2\%$ respectively. Intrinsic viscosity $([\eta]) $ of domestic and foreign squid pen chitosans were decreased with increasing pH from 3.4 to 5.4 which might be due to the reduced repulsion in inter- of intra- chitosan molecules. Intrinsic viscosity of the domestic and foreign squid pen chitosans were decreased with increasing NaCl concentration thus indicated that the domestic and foreign squid pen chitosans were polyelectrolyte molecules and stiffness of squid pen thitosans were 0.11 similar to that of k-carrageenan. Flow type of squid pen chitosan solutions were pseudoplastic fluids without yield stress by the viscosity measurement. But the squid pen chitosan solutions showed newtonian fluid up to $0.15\~0.24\%$ concentration for domestic and $0.21\~0.24\%$ concentration for foreign at $10\~50\%$. Concentration dependence of consistency index in infinitive dilute domain (Kc) were higher in the dilute domain than entangled domain. Activation energies (Ea) of the squid pen chitosans were 3.7, 6.3, 3.6, 4.0 and 4.1 Kcal/g moi for domestic and 3.2, 3.1, 3.4, 3.8 and 3.6 Kcal/g mol for foreign at 0.1, 0.15, 0.25, 0.35 and $0.5\%$, respectively.