• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.202-208
• /
• 2001

Under the constant daylength of 13 hours and growth temperatures of 15$^{\circ}C$ to 27$^{\circ}C$, the final number of loaves (FNL) on the main culm was constant as 15 regardless of temperature in rice variety 'Kwanganbyeo'. Leaf appearance rate (LAR) increased with rising temperature and decreased with phenological development. Threshold temperature (T$_{o}$) was not constant across growth stages, but increased with phenological development. Effective accumulated temperature (EAT), which is calculated by the summation of values subtracting T0 from daily mean temperature, is closely related with number of leaves appeared (LA). LA was fitted to bilinear, quadratic, power and logistic function of EAT. Among the functions, logistic function had the best fitness of which coefficient of determination was $R^2$=0.995. Therefore, LAR prediction model was established by differentiating this function in terms of time: (equation omitted). where dL/dt is LAR, T$_1$ is daily mean temperature, L is the number of leaves appeared, and a, b, and c are constants that were estimated as 41.8, 1098.38, and -0.9273, respectively. When predictions of LA were made by LAR prediction model using data independent of model establishment, the observed and predicted LA showed good agreement of $R^2$$\geq$0.99.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.31-32
• /
• 2002

임계노즐(critical nozzle)은 유동을 유로 최소단면부에서 초크시켜, 질량유량을 계측하기 위한 일종의 유체기구로, 최근 다양한 분야에서 널리 활용되고 있다. 압축성 기체역학의 관계식에 의하면, 임계노즐을 통하는 기체유동의 이론적인 질량유량은 노즐 목의 직경, 노즐 상류의 온도와 압력 그리고 기체의 비열비 등의 함수로 주어진다 그러나 실제 유동에서는 점성과 열전달 등의 초과로 인하여, 이론적 질량 유량과 실제유량의 비 즉 유출계수(discharge coefficient)의 값은 1.0으로 되지 않는다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.171-174
• /
• 2001

초임계유체(supercritical fluid, SCF)는 친환경적 용매로서 고분자 합성과 기능화를 비롯하여 RESS(rapid expansion of supercritical solution)와 초임계염색 등의 섬유공정 분야에서 연구자들의 흥미로운 관심을 받아 오고 있다. 초임계유체는 기체와 액체의 중간적인 특성을 가지면서도 가스와 같이 우수한 확산력을 가지며 또한 아주 낮은 점도를 갖는다. SCF 중에서 비교적 온화한 조건(31.1℃의 임계온도, 73.8기압의 임계압력, Figure 1)에서 초임계상태를 가질 수 있는 이산화탄소가 가장 많이 이용되고 있는데 이는 자원이 풍부하며 쉽게 회수하여 사용할 수 있어 응용 면에서 유리하다. (중략)

• Composites Research
• /
• v.12 no.3
• /
• pp.55-65
• /
• 1999

In this paper, the thermal buckling and postbuckling behaviour of composite beam with embedded shape memory alloy (SMA) wires are investigated experimentally and analytically. The results of thermal buckling tests on uniformly heated, clamped, composite beam embedded with SMA wire actuators are presented and discussed in consideration of geometric imperfections, slenderness ratio of beam and embedding position of SMA wire actuators. The shape recovery force can reduce the thermal expansion of composite laminated beam, which result in increment of the critical buckling temperature and reduction of the lateral deflection of postbuckling behaviours. It is presented quantitatively on the temperature-load-deflection behaviour records how the shape recovery force affects the thermal buckling. The cross tangential method is suggested to calculate the critical buckling temperature on the temperature-deflection plot. Based on the experimental analysis, the new formula is also proposed to describe the critical buckling temperature of a laminated composite beam with embedded SMA wire actuators.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.06a
• /
• pp.48-49
• /
• 1995

전자소자의 축소화에 따라 electromigration은 점차 반도체 디바이스의 주요 결함 원 인으로 부각되고 있다. 본 실험은 현재 배선 재료로 널리 사용되고 있는 Al-1%Si 금속박막 배선의 electromigration에 대한 온도 및 배선길이 의존성에 관하여 연구하였다. ppLCC(pplastic Leaded Chipp Carrier) ppackage된 ppSG(8000$\AA$)/SiO2(1000$\AA$)/Al-1%Si(7000 $\AA$)/SiO2(5000$\AA$)/pp-typpe Si(100)의 보호막처리된 시편과 Al-1%Si/SiO2(5000$\AA$)/pp-typpe Si(100)의 보호막처리되지 않은 시편등을 standard pphotolithograpphy 공정을 이용하여 각각 제작하였다. 선폭 3$mu extrm{m}$, 길이 100, 400, 800, 1600$\mu\textrm{m}$의 등의 Al-1%Si 박막배선구조를 사용하 였다. 가속화실험을 위해 인가된 D.C 전류밀도는 4.5$\times$106A/cm2이었고 실온에서 10$0^{\circ}C$까지 의 분위기 온도에서 electromigration를 실행하였다. 박막배선길이에 따른 MTF(Mean Time-to-Failure)는 임계길이 이상에서 포화되는 경향을 보이며 임계길이는 Al-1%Si 박막 배선에서 분위기온도에 따라 길이 400$\mu\textrm{m}$과 800$\mu\textrm{m}$범위에서 나타났다. 각 시편에서 electromigration에 대한 활성화에너지도 MTF의 특성과 유사하게 임계길이 이상에서 포화 되는 특성을 타나내었다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.327-333
• /
• 1995

전자소자의 축소화에 따라 박막배선에서의 electromigration은 점차 극소전자 디바이스의 주요 결함원인으로 부각되고 있다. 본 실험에서는 현재 박막 배선 재료로 가장 널리 사용되고 있는 AI-1%Si 금속박막배선의 electromigration에 대한 온도 및 배선길이의 의존성에 관하여 연구하였다. PSG($8000AA$)/SiO2(1000$\AA$)/AI-1%Si(7000$\AA$)/SiO2(5000$\AA$)/p-Si(100)의 보호막처리되지 않은 시편 등을 standard photolithography 공정을 이용하여 각각 제작하였다. 선폭 3$\mu$m, 길이 100, 400, 800, $\1600mu$m등의 AI-1%Si 배막배선구조를 사용하였다. 가속화실험을 위해 인가된 d.c.전류밀도는 4.5X106A/$ extrm{cm}^2$이었고 실온에서 $100^{\circ}C$까지의 분위기 온도에서 electromigration test를 진행하였다. 박막배선의 길에에 따른 MTF(Mean-Time-to-Failure)는 임계길이 이상에서 포화되는 경향을 보이며 이는 보호막층의 유무에 관계없이 나타난다. 선폭 $3\mu$m인 AI-1%Si 박막배선에서 임계길이는, 보호막처리된 시편은 $800\mu$m, 보호막처리되지 않은 시편은 $400\mu$m 배선길이에서 나타난다. 이러한 포화의 경향은 낮은 온도에서 더욱 명확해지는 특성을 보인다. 각 시편에서 electromigration에 대한 활성화에너지도 MTF의 특성과 유사하게 임계길이 이상에서 포화되는 특성을 보인다.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.91-97
• /
• 2006

This study was executed to review feasibility on the calculation of critical velocity with a reduced model of an actual tunnel in order to establish the optimum fire protection system for a fire in road tunnels. In a scaled model about 1/29 of an actual tunnel based on the Froude scaling, critical velocity was calculated by visualizing smoke flow and analyzing correlation with temperature. In the experiment, critical velocities at which smoke backflow length became zero showed a small difference within about 5% compared to results calculated by the Kennedy formula, and the relation between smoke flow and temperature distribution appeared similarly without getting greatly influenced by changes in fire intensity.

• Nuclear Engineering and Technology
• /
• v.17 no.3
• /
• pp.193-199
• /
• 1985

Iodine-induced stress corrosion cracking tests of Zircaloy-4 cladding were undertaken using the modified infernal pressurization method. The effects of iodine concentration and applied stress were studied. The critical iodine concentration for SCC was found to be about 0.2 mg/$\textrm{cm}^2$ at 603$^{\circ}$K. The threshold stress was dependent on the test temperature and the mechanical properties of the specimen. The fracture surface showed that the crack propagated stepwise iron one grain to others until the material was unstable and then ruptured mechanically. The initial region showed the transgranular feature and the wedge-shaped cracks. As the crack proceeded, the transgranular and ductile-tearing mired feature appeared in the middle region.

• Journal of the Korean Chemical Society
• /
• v.58 no.6
• /
• pp.528-534
• /
• 2014

In some binary solution, closed miscibility loop of temperature-composition phase diagram occurs where both an upper critical solution temperature and a lower critical solution temperature exist. It is known that this phenomena occurs if specific interaction between molecules exists. There are several ways describing the specific interaction. In this work it is assumed that the total number of specific interactions is distributed according to binomial distribution. In this case, exact mathematical conditions for closed miscibility loop phase behavior are derived when the specific interaction is applied to regular solution theory, quasichemical theory and Flory-Huggins lattice theory. And we investigated the effect of parameters on the phase diagram. The phase diagram of water-nicotine is calculated and compared with experimental data.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.443-450
• /
• 2006

Micelles have been used in many applications. In these applications it is of prime importance to know how the critical micelle concentration (CMC), above which the micelles are formed, depends on temperature. Up to date polynomial functions of temperature have been used to describe temperature dependence of CMC. In this article it is shown that such polynomials are inadequate tools to express thermal behavior of CMC. Hence, new equations of CMC(T) have been derived on the basis of rigorous thermodynamic equations and experimental observations on CMCs. The new equations fit CMC data excellently, and further they lead to a power law for the CMC. The exponent of the power-law expression is 2 irrespective of surfactant systems, which points to the generality of newly found equations.