• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.30-37
• /
• 2003

In this paper, a discrete wavelet transform (DWT)-based watermarking system is proposed. The main feature of proposed system is that the embedding system uses adaptive thresholds to control the trade-off between the qualify of the watermarked image and the capacity of the watermark, and the trade-off between the quality and robustness of the watermarked image. Also, the extracting system rebuilds threshold according to various attacks and decides a watermark bit from the least distorted coefficient after measuring the distortion of coefficient. Finally, a new measure to detect the uniqueness of watermark is proposed. The experimental result shows that the proposed watermarking system is robust against conventional signal processing and intentional attacks.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.2
• /
• pp.19-29
• /
• 2019

We develop a complete system that includes data collection, signal processing, and real-time interaction for effective neurofeedback training. Our system supports a sophisticated technique to find threshold values which are quite important for effective neurofeedback system. A therapist specifies a target success rate of positive feedback, allowable error and time. The system computes a current success rate and compare it with the target one. If the difference between two rates exceeds the allowable error for allowable time, we find an optimum threshold value to obtain the target success rate by using numerical optimization technique. We conduct several experiments by varying input parameters: target success rate, allowable error and time, and demonstrate the effectiveness of our technique by showing the desired target success rate is stably obtained and systematically controlled by input parameters.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.170-181
• /
• 2015

A research on extracting croplands located nearby coastal areas using the spatial information data sets is the important task for managing the agricultural products in coastal areas. This research aims to extract the various croplands(croplands on mountains and croplands on plain areas) located nearby coastal areas using the KOMPSAT-2 imagery, the high-resolution satellite imagery, and the airborne topographic LiDAR(Light Detection And Ranging) data acquired in coastal areas of Uljin, Korea. Firstly, the NDVI(Normalized Difference Vegetation Index) imagery is generated from the KOMPSAT-2 imagery, and the vegetation areas are extracted from the NDVI imagery by using the appropriate threshold. Then, the DSM(Digital Surface Model) and DEM(Digital Elevation Model) are generated from the LiDAR data by using interpolation method, and the CHM(Canopy Height Model) is generated using the differences of the pixel values of the DSM and DEM. Then the plain areas are extracted from the CHM by using the appropriate threshold. The low slope areas are also extracted from the slope map generated using the pixel values of the DEM. Finally, the areas of intersection of the vegetation areas, the plain areas and the low slope areas are extracted with the areas higher than the threshold and they are defined as the croplands located nearby coastal areas. The statistical results show that 85% of the croplands on plain areas and 15% of the croplands on mountains located nearby coastal areas are extracted by using the proposed methodology.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.671-672
• /
• 2011

비 신뢰적이고 비 대칭적인 무선 링크를 갖는 무선센서네트워크에서 데이터전송이 성공했음에도 ACK 메시지 전송 실패로 발생하는 불필요한 데이터 재전송을 피해 에너지 효율을 높이는 전송기법들이 제안되었다. 이러한 전송기법의 하나인 Probability-based Data Forwarding(PDF)기법에서 기대 전송 횟수 임계치를 설정해 임계값만큼 데이터를 재전송 하였다면 더 이상 재전송하지 않음으로 불필요한 에너지 낭비를 줄인다. 하지만 PDF 는 데이터 전송 횟수만을 고려함으로, 여전히 ACK 메시지의 신뢰성 있는 전송을 보장하지 못한다. 따라서 본 논문은 에너지 효율적인 PDF 기법에 비 대칭적 무선 노드의 특성을 고려하여 ACK 메시지 전송 시 사용되는 역방향 링크의 신뢰성이 낮다면 높은 신뢰성의 역방향 링크를 갖는 노드들을 선택하여 멀티 홉으로 송신 노드에게 ACK 메시지를 전송하는 기법을 적용한다. 이를 통해 불필요한 데이터 전송을 줄여 에너지의 낭비를 줄이고 무선센서네트워크의 수명을 연장한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.218-225
• /
• 2005

Although Snoop protocol can enhance TCP throughput efficiently in a wired-cum-wireless environment, it has a problem in performing local packet retransmissions under a burst error-prone wireless link. AT-Snoop protocol is proposed to cope with this Snoop protocol's problem by adopting adaptive timer. In this paper, TCP throughputs of AT-Snoop protocol have been analyzed with varying wireless link conditions and the ways of setting parameters of AT-Snoop protocol for higher TCP throughput are found out through computer simulations. From the simulation results, AT-Snoop protocol's two parameters, local retransmission threshold value and local retransmission timeout value, are closely related with the fading changing rate. To get higher TCP throughput, local retransmission threshold value and local retransmission timeout value should be set to a little bit larger values than average WSRTT(Wireless Smoothed Round Trip Time) and mean bad period of the wireless link, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.33-39
• /
• 2018

An additive noise reduction algorithm for a mass spectrum analyzer is proposed. From the measured ion signal, we first used an estimated threshold from the mode of the measured signal to eliminate background noises with the white Gaussian characteristics. Also, a signal block corresponding to each mass index is constructed to perform a second order curve fitting and a linear approximation to signal block. In this process, the effective signal block composed of only the ion signal can be reconstructed by removing the impulsive noises and the sample signals which are insufficient to be viewed as normal ion signals. By performing curve fitting on the effective signal block, the noise-free mass spectrum can be obtained. To evaluate the performance of the proposed method, a simulation was performed using the signals acquired from the development equipment. Simulation results show the validity of the threshold setting from the mode and the superiority of the proposed curve fitting and linear approximation based noise canceling algorithm.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.446-452
• /
• 2016

The aircraft has to be considered for safety very importantly because of peculiarity of flight in the air, so it should be retained through proper inspection and maintenance not only in production phase but also in operating phase. Recently, it is using the latest technology as engineering approach not depending on human factor to determine on maintenance needs, and domestic production rotary aircraft also has the health & usage monitoring system to measure and to monitor major components. However, continued vibration exceedance phenomenon occurred in production and operation phase because of inappropriate thresholds, and it confirmed as false alarm which is not necessary to repair. In this paper, it is described that operational concept of HUMS, and especially it contains a study result for efficiency of aircraft operation and ultimately the improvement of flight safety by optimizing HUMS thresholds to determine efficiently necessity of maintenance under limited conditions and by establishing inspection/maintenance procedures when the re-designated thresholds exceedance occurred.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.73-78
• /
• 2019

Due to frequent topology changes in wireless networks, inter-node link disconnection and path re-establishment occur, causing problems such as overloading control messages in the network. In this paper, to solve the problems such as link disconnection and control message overload, we perform path setup in three steps of the neighbor node discovery process, the route discovery process, and the route management process in the wireless network environment. The link stability value is calculated using the information of the routing table. Then, when the zone master monitors the calculated link value and becomes less than the threshold value, it predicts the link disconnection and performs the path reset to the corresponding transmitting and receiving node. The proposed scheme shows a performance improvement over the existing OLSR protocol in terms of data throughput, average path setup time, and data throughput depending on the speed of the mobile node as the number of mobile nodes changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.497-504
• /
• 2005

We propose an efficient video watermarking scheme using re-estimation and minimum modification technique of motion vectors. Conventional methods based on motion vectors do watermarking using modification of motion vectors. However, change of motion vectors results in the degradation of video quality. Thus, our scheme minimizes the modification of the original motion vectors and replaces an original motion vector by the adjacent optimal motion vector using re-estimation of motion vectors to avoid degradation of video quality. Besides, our scheme guarantees the amount of embedded watermark data using the adaptive threshold considering for an efficient video watermarking. In addition, this is compatible with current video compression standards without changing the bitstream. Experimental result shows that the proposed scheme obtains better video quality than other previous algorithms by about $0.6{\sim}1.3\;dB$.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.287-292
• /
• 2012

In this study, Multi-Channel Magnetic Flux Leakage(MFL) sensor - based inspection system was applied to monitor the condition of cables. This inspection system measures magnetic flux to detect the local faults(LF) of steel cable. To verify the feasibility of the proposed damage detection technique, an 8-channel MFL sensor head prototype was designed and fabricated. A steel cable bunch specimen with several types of damage was fabricated and scanned by the MFL sensor head to measure the magnetic flux density of the specimen. To interpret the condition of the steel cable, magnetic flux signals were used to determine the locations of the flaws and the level of damage. Measured signals from the damaged specimen were compared with thresholds set for objective decision making. In addition, the magnetic flux density values measured from every channel were summed to focus on the detection of axial location. And, sum of flux density were displayed with threshold. Finally, the results were compared with information on actual inflicted damages to confirm the accuracy and effectiveness of the proposed cable monitoring method.