• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.257-262
• /
• 2009

The unified power flow controller(UPFC) is one of the most effective devices in the FACTS family. This paper concerns about a filtering technique for reducing the computer calculation to determine the optimal location of UPFC in a power system. The sensitivities of the power generation cost for UPFC control parameters are evaluated. This technique requires that only one optimal power flow is run to get UPFC sensitivities for all possible transmission lines. To find out a optimal locating of a single UPFC in power system, an ideal transformer model which consists of a complex turns ratio and a variable shunt admittance was used. In this model, the UPFC control variables do not depend on UPFC input and output currents and voltages. The sensitivity method was tested on a 5-bus system derived from the IEEE 14-bus system and IEEE 14-bus system to establish its effectiveness.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.172-179
• /
• 2022

Unlike other processes such as washing, the ironing process in the laundry process is difficult to standardize and thus relies on manual labor. Unlike upper garments, pants have pleats at the waist as well as a crease line below the waist, Therefore, two separate ironing devices have been developed and used. However, in this method, problems such as additional worker input, space loss, and wrinkling of pants occur due to manual movement between processes, Consequently, a pants ironing device that combines the two equipments is required. The all-in-one pants ironing system described in this paper automatically sequentially irons the upper part and side of the pants regardless of the length, shape, and upper pleats of the pants. It also performs a self-diagnosis function while displaying the ironing progress on the user's monitor. As a result of this study, it became possible to double the amount of ironing and reduce power consumption by more than 20% compared to the case of using two independent equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.97-105
• /
• 2011

This paper proposes a new "Live Book Service" that is combined the analog contents such as paper books and digital contents with various digital multimedia elements, and this service can project the additional digital multimedia contents on the analog paper. Also, we developed a monolithic stand type system which is composed of camera and pico projector, so that it can demonstrate the proposed contents. We also devised the low computational cost algorithm in bare-hands recognition which can be used as the interface between the system and users. In addition, to recognize the bare-hands which can be used as the interface between the digital and users, we make the low cost algorithm. Therefore this can be the interaction between the system and users. As a result, our proposed system can be used as a useful tool for various e-book or u-learning fields that requires high efficiency and much immersion.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.400-401
• /
• 2008

배전공사의 경우 대부분 활선 및 무정전으로 시공하고 있으나 전력량계의 경우 실효나 소손 또는 증설 및 일부해지로 전력량계를 교체 작업 시 정전을 시킨 후 전력량계를 교체하고 있다. 전력량계교체 시 정전을 하여야 함으로 사가의 경우 생산성 저하, 주택의 경우 컴퓨터나 가전기기일시 사용 중지 등 고객의 일상생활에 불편을 초래되는 경우가 있다. 또한 전력량계 단자대와 본체가 일체형으로 구성되어 전력량계는 이상이 없더라도 단자대 부분이 불량인 경우 전력량계 내용 년수가 많이 남아 있음에도 전력량계 불용으로 폐품처리 함으로써 자재 활용능력이 떨어지고 예산이 낭비되고 있다. 이에 전력량계 교체 시 무정전 기자재 개발로 정전시간 단축으로 고객의 전기사용에 편리성 및 전력량계의 효율적인 운영을 기하고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.131-136
• /
• 2011

In this paper, we fabricate multi channel receiver for radar system. This receiver at X-band can be received 8 signal of an identical characteristic, dynamic range has more than 80[dB]. To process direct received signals, this system has the built-in two digital de-modulators which offer the minimum loss on the receiving signal path and has high stability by adding Built-In Test. The gain, noise figure, difference of amplitude and phase on the signal path is respectively 20${\pm}$2[dB], 19[dB], ${\pm}$2[dB], $10^{\circ}$ and below.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.203-207
• /
• 2010

In this paper, The design and implementation of Multi Channel Receiver is described in this paper. This Receiver system operates at X-band with processing received signal, more than 80[dB] dynamic range and wide-band signals at the same time. To process direct received signals, this system has the built-in Digital De-modulators which offer the minimum loss on the receiving signal pass and has high stability by adding Built-In Test (BIT). The performance of Multi Receiver is the following. The gain, noise figure, difference of amplitude and phase on the signal pass is respectively $14{\pm}2[dB]$, 19[dB], ${\pm}2[dB]$, and $10^{\circ}$ below.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.3
• /
• pp.13-23
• /
• 2021

In this paper, we proposed a framework that generates the trajectory of a single rigid body based on its COM configuration and contact pose. Because we use a smaller input dimension than when we use a full body state, we can improve the learning time for reinforcement learning. Even with a 68% reduction in learning time (approximately two hours), the character trained by our network is more robust to external perturbations tolerating an external force of 1500 N which is about 7.5 times larger than the maximum magnitude from a previous approach. For this framework, we use centroidal dynamics to calculate the next configuration of the COM, and use reinforcement learning for obtaining a policy that gives us parameters for controlling the contact positions and forces.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.41-46
• /
• 2022

This study analyzed the results and implications of the industry-university cooperation human resource nurturing process based on the I-O model for the Motion Graphics major and the Global Hotelier major in Baek seok University. In this study, based on the analysis of the human resources training performance through industry-university cooperation in the motion graphics and hotelier fields for 5 years, what kind of efforts were made for successful human resource training, and the level of performance was analyzed and improvement points were suggested. In this study, four strategies were set for successful industry-university-tailored human resource nurturing: student-industry matching through industry participation in education, industry-university integrated education, education quality advancement, and customized education infrastructure construction. As a result of the analysis, customized human resource training should first be developed through industry demand survey and a mirror-type practice room should be built to fit the corporate environment. Second, it was found that it is possible to be individual only if there is an active participation of industry experts throughout the curriculum such as subjects and non-subjects.

• Journal of the HCI Society of Korea
• /
• v.12 no.4
• /
• pp.37-44
• /
• 2017

Eye-typing is one kind of human-computer interactive input system which is implemented by location data of gaze. It is widely used as an input system for paralytics because it does not require physical motions other than the eye movement. However, eye-typing interface based on Korean character has not been suggested yet. Thus, this research aims to implement the eye-typing interface optimized for Korean. To begin with, design objectives were established based on the features of eye-typing: significant noise and Midas touch problem. Multilevel input system was introduced to deal with noise, and an area free from input button was applied to solve Midas touch problem. Then, two types of eye-typing interfaces were suggested on phonological consideration of Korean where each syllable is generated from combination of several phonemes. Named as consonant-vowel integrated interface and separated interface, the two interfaces are designed to input Korean in phases through grouped phonemes. Finally, evaluation procedures composed of comparative experiments against the conventional Double-Korean keyboard interface, and analysis on flow of gaze were conducted. As a result, newly designed interfaces showed potential to be applied as practical tools for eye-typing.

• The KIPS Transactions:PartA
• /
• v.14A no.6
• /
• pp.383-390
• /
• 2007

This paper describes the e-learning system for science and engineering mathematics using computer algebra system and Bayesian inference network. The best feature of this system is using one of the most recent mathematical dynamic web content authoring model which is called client independent dynamic web content authoring model and using the Bayesian inference network for diagnosing student's learning. The authoring module using computer algebra system provides teacher-user with easy way to make dynamic mathematical web contents. The diagnosis module using Bayesian inference network helps students know the weaker parts of their learning, in this way our system determines appropriate next learning sequences in order to provide supplementary learning feedback.