• Journal of the Korean GEO-environmental Society
• /
• v.17 no.2
• /
• pp.31-39
• /
• 2016

Vertical drain has usually been used to accelerate the consolidation of soft clay deposits with high moisture content. Busan thick clay deposits are subjected to artesian pressure from an aquifer in sand and gravel layers. However, effect of artesian pressure existing in drainage-installed soft ground on consolidation behaviors is not well known. This paper investigates the consolidation behavior of drainage-installed soft ground at the Nakdong river estuary with artesian pressure and without artesian pressure. A series of one-dimensional large size column test was carried out to find out the consolidation characteristics of clay. Test results indicated that total settlement of clay with artesian pressure was higher than that without artesian pressure because effective stress decreased due to upward flow. Dissipation rate of excess pore water pressure delayed and excess pore water pressure did not fully dissipate in clay layer with artesian pressure. Undrained shear strength of clay ground with artesian pressure was lower than that without artesian pressure.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.55-64
• /
• 2003

Desiccation of a soil is basically the removal of water by evaporation, which is controlled by evaporativity and evaporability. Surface evaporation improves the trafficability which is essential for the access of construction equipment in the area reclaimed with soft clay. The existing traditional methods for evaluating evaporation can not account for the deformation of reclaimed soft soils during evaporation. Therefore, a theoretical model for predicting the rate of evaporation from the surface of a deformable material is proposed. The model is based on a system of equations for coupled heat and mass transfer in unsaturated soils. The modified pressure plate extractor test and glass desiccator test were carried out to obtain the soil-water characteristic curve for a deformable soil. The column drying test was conducted to investigate one dimensional water flow, heat flow and evaporation in the surface. A finite difference program was developed to solve the coupled nonlinear partial differential equations, which permit the study of water, vapor and heat flows in the deformable soil. Comparison between measured and simulated values shows a reasonably good matching between the two.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.78-85
• /
• 2022

Natural white clay was treated with 6 M of H₂SO₄ and heated at 80℃ for 6 h under mechanical stirring and the resulting acid active clay was used as an adsorbent for the removal of Cs⁺ in water. The physicochemical changes of natural white clay and acid active clay were observed by X-ray Fluorescence Spectrometry (XRF), BET Surface Area Analyser and Energy Dispersive X-line Spectrometer (EDX). While activating natural white clay with acid, the part of Al₂O₃, CaO, MgO, SO₃ and Fe₂O₃ was dissolved firstly from the crystal lattice, which bring about the increase in the specific surface area and the pore volume as well as active sites. The specific surface area and the pore volume of acid active clay were roughly twice as high compared with natural white clay. The adsorption of Cs⁺ on acid active clay was increased rapidly within 1 min and reached equilibrium at 60 min. At 25 mg L^- of Cs⁺ concentration, 96.88% of adsorption capacity was accomplished by acid active clay. The adsorption data of Cs⁺ were fitted to the adsorption isotherm and kinetic models. It was found that Langmuir isotherm was described well to the adsorption behavior of Cs⁺ on acid active clay rather than Freundlich isotherm. For adsorption Cs⁺ on acid active clay, the Langmuir isotherm coefficients, Q, was found to be 10.52 mg g^-1. In acid active clay/water system, the pseudo-second-order kinetic model was more suitable for adsorption of Cs⁺ than the pseudo-first-order kinetic model owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal. The overall results of study showed that acid active clay could be used as an efficient adsorbent for the removal of Cs⁺ from water.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.103-110
• /
• 1997

This thesis is to investigate the one-dimensional consolidation behavior of soft marine clay with uniform surcharges by perfoming numerical and experimental works. Parametric experimental works of centrifuge model test were carried out changing test conditions of gravitational level in centrifuge, magnitude of surcharges and construction sequence of applying surcharges. Results of centrifuge model experiments were analyzed by using the numerical technique of explicit finite difference method based on the finite strain consolidation theory, being known to be appropriate to analyze the consolidational behavior of soft clay with a very high initial void ratio using the Lagrangian and the material coordinate systems. Test results were in relatively good agreements with analyzed results in terms of excess pore pressure dissipation and consolidation settlement with time and final void ratio distribution.

• Water for future
• /
• v.7 no.2
• /
• pp.75-82
• /
• 1974

본시험은 관개 및 배수 설계를 위한 기초자료 제공을 목적으로 토양수분 및 지하수위의 변화상태를 구명하고자 하는 것으로 카나다 퀴백(Quebec) 지방 저지대의 대표적인 2종의 태양인 점토와 사질로움 토양에 대해서 일차적으로 지표, 지하배수간의 토양수분과 지하수위의 변화를 연구분석한 것으로 그 결과를 요약하면 다음과 같다. 1. 2종의 토양(점토, 사질로움)에 있어서 공히 토양수분은 지표로부터 지하로 내려갈수록 증가되는 상태를 나타냈으면 이는 하층토로 내려감에 따라 팽창된 치밀한 토양 조직을 가지고 있음을 시사하며 2. 동기에 있어서는 지표로부터 12inch 깊이의 토양수분이 더 깊은 18inch나 24inch 깊이의 토양수분보다 증가된 상태를 유지하였다. 이는 토양내의 빙결막이나 지표면의 눈 또는 어름에 영향으로 생각되며 이 경향은 점토질 토양에서 보다 토양내 빙결막으로의 수분 이종을 조장해주는 투수 계수가 큰 사질로움 토양에서 더 높았다. 3. 양식험구 공히 지표에서 얕은 지하 0∼3inch 이내의 토양수분은 항우를 전후해서 급격한 변화를 가져왔다. 여기에서 수분의 급상승은 호우시나 표층토가 하층토의 토양수분에 영향을 주는 항우이전에 포장용수량(Field capacity)에 달했기 때문에 급항하는 지표면의 물 분자가 열에너지에 의해 증발산되고 천층에 산재한 초, 수근에 의해 소비되는 때문인 것으로 사료된다. 4. 지하수위하의 토양수분은 포화에 달하여 거의 일정할 것으로 기대되었지만 실제로 많은 변화를 가져왔다. 이들 변화에는 부분적으로 토양사극이 지하수위하이라도 채워지지 않았거나(Capillary pressure가 작을 시) 혹은 관측기간 중에 토양의 융기와 수축에 기인된다고 생각된다. 5. 지하배수구가 지표배수구에 비해 지하수위항하가 빨랐음은 물론 사질로움 토양에서는 보다 높은 투수계수로 인해서 지하수위의 항하가 점토질 토양에서 보다 훨씬 빨랐음을 보여주고 있다.표시할 수 있다.된다.acid $0.41{\sim}0.65%$, 오미자는 malic acid $1.51{\sim}3.90%$, citric acid $2.40{\sim}3.92%$로 주요 유기산이 있다. 타닌은 물보다 에탄올 추출물이 다소 함량이 높았으며 특히 오갈피는 $3.35{\sim}3.85%$로 매우 높은 함량이었다.a 6 cases, etc. 2. The retroperitoneal space including kidneys were the most commonly involved site (43.5%), of which Wilms' tumor was the commonest. 3. About 2/3 of tumors developed under the age of 6 and the commonest lesion was Wilms' tumor and the next being neuroblastoma, teratoma, ovarian cyst and so forth. 4. In all tumors except ovarian tumor and choledochal cyst, male was more frequently affected. 5. In plain abdomen 75% of neuroblastoma crossed the mid line while in Wilms' tumor only 2 cases (14%) showed midline cross. Calcific density was 입력불가 in all 6 cases of teratoma (100%) as dense and discrete ossification, in 3 case of neuroblatoma (38%) characteristically in diffuse stippled appearance and in one case

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.252-260
• /
• 2022

In Korea, low-quality kaolin has significantly greater reserves and superior economic efficiency than high-purity kaolin. However, the utilization is low because it does not match the demand conditions of the market, and it is difficult to find a suitable source of demand. The purpose of this study is to derive the possibility and optimal calcination temperature of domestic low-quality kaolin that can be used as a raw material for limestone plastic clay cement (LC³). Isothermal calorimetry, X-ray diffraction analysis, Thermogravimetric Analysis, and compressive strength tests were conducted to evaluate hydrate generation and mechanical properties of LC³ paste according to calcination temperatures (600 ℃, 700 ℃, 800 ℃, 900 ℃). As a result, although 50 % of the clinker was replaced, the domestic low-quality kaolin clay produced calboaluminate hydrate and C(A)SH from the 3rd day of hydration, showing almost equal or higher strength to OPC, and there was a big difference in strength depending on the firing temperature.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.786-793
• /
• 2021

Purpose: An experiment was conducted to analyze the characteristics of the settlement of soft clay soil in the central region of the west coast of Korea, which has a high silt content and is difficult to predict settlement due to various stress histories. Method: Field experiments were conducted for three cases. The settlement amount of the subsidence plate was measured in each case, and the following conclusions were drawn by analyzing Terzaghi's one-dimensional consolidation settlement amount, both the hyperbolic method and the Asaoka method. Result: The predicted value by Terzaghi was analyzed to be the largest in all cases, and it was predicted to be 111% to 187% larger than the subsidence plate settlement value. That is, the subsidence plate settlement value, which is the amount of settlement of the actual ground, showed a settlement of 53.4~89.9% compared to the predicted value of Terzaghi. Therefore, it was analyzed that the expected settlement of the Terzaghi method in the clay soft ground of the central west coast of Korea is more than the actual settlement. Conclusion: It was analyzed that the Asaoka method and the hyperbolic method presented relatively similar results, and in practice, predicting the settlement amount smaller than the actual settlement amount may cause a risk, so the hyperbola analysis method predicted 6~14% larger than the actual settlement amount can be used as a safety side.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.3
• /
• pp.37-43
• /
• 2006

An analytical solution method capable of determining the geometric configuration and developed tensile forces of mooring lines associated with fixed plate/pile or drag anchors has been developed. The solution method, satisfying complete equilibrium conditions, is capable of analyzing multi-segmented mooring lines that can consist of either chains, cables, or synthetic wires embedded in layered seafloor soils. The solution method utilizes a systematic iterative search method based on specific boundary conditions. This paper describes the principles associated with the development of the solution for the mooring line analysis. Comparisons of predictions with results from a series of field tests of mooring lines on various types of drag anchors are also described. Comparisons include the tension in anchor, the length of mooring line on the bottom, and the angle of mooring line at the water surface buoy. The results indicate that the analytical solution method is capable of predicting the behavior of mooring lines with high degree of accuracy.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.13-24
• /
• 1995

Laboratory testings, consisting of soil properties testing and vacuum consolidation testing with and without vertical wick drain, were carried out on five different types of soil to determine soil properties and relationship between settlement and time. One dimensional consolidation teat was performed to determine if this test could be used for predicting the behavior of soils during vacuum consolidation. From the results of this study, the one dimensional consolidation test does not appear to be suitable for predicting the rate of vacuum consolidation without wick drain. However, one dimensional consolidation test reasonably predicts the total settlement of vacuum consolidation without wick drain. In vacuum consolidation, the amount of the settlement for silty soils were more or less the same for both cases, with wick drain and without wick drain, even if the time required for consolidation was considerably different. And, strategic placement of wick drain ensures moisture content and the value of the density are similar throughout the soil sample. However, the presence of wick drain for clay Boils increased the amount of settlement and also shortened the time required for consolidation.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.5-17
• /
• 2009

The microcomputer program PileNSF (Pile Negative Skin Friction) is developed by the authors in a graphical user interface (GUI) environment using $MATLAB^{(R)}$ for predicting the bearing capacity of a pile embedded in a consolidating ground by surcharge loading. The proposed method extends the one-dimensional soil-pile model based on the nonlinear load transfer method in OpenSees to perform an advanced one-dimensional consolidation settlement analysis based on finite strain. The developed program has significant features of incorporating Mikasa's finite strain consolidation theory that accounts for reduction in the thickness of the clay layer as well as the change of the soil-pile interface length during the progress of consolidation. In addition, the consolidating situation of the ground by surcharge filling after the time of pile installation can also be considered in the analysis. The program analysis by the presented method has been verified and validated with several case studies of long-term test on single piles subjected to negative skin friction. Predicted results of negative skin friction (downdrag and dragload) as a result of long from consolidation settlement are shown to be in good agreement with measured and observed case data.