• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1578-1583
• /
• 2003

Time-Optimal solutions for attitude control with reaction wheels as well as with thrusters are studied. The suggested varying-time-sharing ratio thrusting is found to reduce the maneuvering time enormously. The hybrid control such as sequential hybrid and simultaneous hybrid with reaction wheels and thrusters are considered. The results show that simultaneous hybrid method reduces the maneuver time very much. Spacecraft model is KOrea Multi-Purpose SATellite(KOMPSAT)-II, which is being developed by KARI in KOREA as an agile maneuvering satellite.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.1-6
• /
• 2003

Freon gas has been replaced with LPG in the cosmetic industry because of its bad effects on environment. In this paper, skincare product with a cooling effect was developed using LPG as propellant. A cooling effect is obtained by the ice which is formed through spraying. Ice formation is affected by the composition of LPG and most of all, the high content of propane gas in the LPG results in the irregular surface of ice formed because of its high vapor pressure. Also the ratio of LPG to skincare solution affects the formation of ice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.236-240
• /
• 1991

The objective of this research was to determine the effect of storage period on the cooking qualities of barley. The expansion rate and the water absorption rate of cooked barley were decreased with the increase of polishing degree. When the barley having the same degree of polishing were cooked for 50 minutes, both rates were showed negative correlation with the storage time by showing the lower values in the barley having longer storage periods. Whiteness of cooked barley did not showed any clear correlation with the storage period. The texture of cooked barley and the amylogram properties also did not showed any correlation with the storage period due to the effects of other factors such as harvesting stage and cultivating conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.503-510
• /
• 2016

Incinerators generally emit pollutants such as NOx and CO during the combustion process. In this paper, pollutant emissions and temperature distributions were studied in a simulated incinerator with a reversed (relative to the flue gas flow) secondary air injection system. The experiments were performed by using a lab-scale furnace in order to evaluate the effects of the injection location, direction and flow rate of secondary air jets. The emission of NOx was lower in the case of reversed secondary air injection than in the case of cross injection, due to the recirculation and mixing of the exhaust gas. In the reversed air injection cases, thermal NOx emissions decreased as secondary air ratio increased from 30 to 60 and slightly increased at secondary air ratios higher than 60. In most cases, CO emissions were not detected except for a few reversed secondary air injection cases, in which cases CO concentrations below 2ppm were observed.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.581-585
• /
• 1999

The surface treated hydroxypropyl methylcellulose(HPMC) which could adjust the soluble time was synthesized when 40 wt % glyoxal solution and $KH_2PO_4$ were sprayed and reacted. And also, the solution dynamic at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion characteristics at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion was observed in the neutral solution and the viscosity was increased after directly dissolved as the solution become alkali condition. But the fine-powder type of HPMC which reacted with glyoxal and $KH_2PO_4$ was dispersed regardless of pH of solution and observed that it was dissolved and its viscosity increased after elapsing some time. With increasing amount of glyoxal and $KH_2PO_4$, the soluble time was delayed. The reaction condition was about 60 min at $75{\sim}85^{\circ}C$. Especially, the removal process of organic solvent after reaction was not required due to reaction under water solution without organic during glyoxal and $KH_2PO_4$ treatment. And also, the HPMC which could adjust the soluble rate in water or organic solvent by changing the degree of substitution of HPMC was synthesized.