• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.104-122
• /
• 2019

In the era of the fourth industrial revolution, maker education is drawing attention as a method of student-led education. At a time when interest in maker education is also growing in technology education, figuring out what stage of concern(SoC) a middle school technology teacher is critical to effective implementation. This study analyzed SoC in maker education by layer sampling among 400 middle school technology teachers using Concerns-based adoption model. SoC was then obtained by measuring the origin using the SoCQ and then presenting it as a SOCQ profile. Gender, training experience with two lower variables were analyzed using t verification, working cities, teaching experience with more than three lower variables were analyzed using one-way ANOVA. Studies showed that SoC in maker education of middle school technology teachers showed the most similar characteristics to that of non-users. The difference in concern depending on gender was that male teachers were more concerned in maker education than female teachers. The difference in concern depending on the working city was that teachers working in the township were more concerned in the maker education than teachers working in the large city, and the difference in concern depending on the teaching career was higher among teachers with middle experience than those with low and high experience. There was also a higher stage of concern in maker education than in teachers without training experience. Therefore, it is necessary to provide middle school technology teachers with an introduction to the maker education and various information, teaching, learning and evaluation data to enhance overall concern and to support the use and evaluation of the maker education in the classroom by providing various teacher training and consulting on the maker education in the future. Further, through further study, we should conduct study that analyzes both Stage of Concern, Level of Use and Innovation Configuration, to put in the effort for effective settlement of maker education.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.42-50
• /
• 2012

City squares are public open spaces which are closely related to the peoples daily lives. Most squares are located in the center of the city, and they are usually used for community gatherings and they are suitable for open markets, music concerts, political rallies, and other events. City squares also play an important role as a grand public place operating in multi functions that require involvement of more people. The purpose of this study is to examine satisfaction on the spatial components, characteristics, and the user satisfaction in City Squares. The slady also analyzed the relationship between the satisfaction about spatial components, characteristics and it also shows that the user satisfaction is followed. This study sites are made in 3 grand public places in the center of Seoul including the Seoul plaza, Cheonggye Plaza, and Gwanghwarnun Square. Data were analyzed using several statistical methods such as descriptive statistics, factor analysis, ANOVA, correlation and regression. Results of the study are as follows: First, factor analysis carried out to extract the various factors of satisfaction on the sites; spatial components, usability, amenity/security, and spatial characteristics. User satisfaction concerning usability factor was higher than the satisfaction of the other factors. This result represented that the slady sites play an important role to the public open spaces in the city. Second, users showed high user satisfaction to study sites, and user satisfaction rate toward the Gwanghwarnun Square is the highest because of its facility planuing. Finally, user satisfactim was strongly correlated on the usability factor of spatial planning. Also, the significant correlations between the user satisfaction and the other factors such as spatial components, security, and spatial characteristics of spatial planning are presented. Results of this study can help guide the planning and management of the city square as a public open space based on the understanding of user perception and satisfaction.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.100-114
• /
• 2018

Nationally designated Cultural Properties 'Scenic site No.12 Maisan Mountain, Jinan' designated areas and some protected areas, and taking into account the dynamics of naturalized plants causing problems, we will restore the original vegetation scenery of Mt. Maisan. The results of this study are as follows. A total of 76 families, 192 genera, 286 taxa, and inland and inhabited areas, 76 and 138 genera and 163 taxa were identified in the areas of Ammaibong. The total number of naturalized plants identified in this study area is 28 taxa total, which corresponds to 7.1% naturalization rate(NR) among the vascular plants of all 395 taxa, and the urbanization index(UI) corresponds to 8.4% of the 333 taxa of Korean naturalized plants. Ecosystem disturbance plants identified in the survey area were Ambrosia artemisiifolia 1 taxa. The naturalized plants controlled and managed by separate anthropogenic vegetation management within the designation and protection area of Maisan scenic place are three species of herbaceous Rumex acetosella, A. artemisiifolia and Festuca arundinacea. It was identified as a breed. Indigofera bungeana and F. arundinacea communities around the stairway and Amorpha fruticosa, I. bungeana, A. artemisiifolia and Amaranthus patulus of the top of Am-Maibong were selected as the first priority sites for exclusion of exotic species in Maisan area and target naturalized plants species to the Ammaibong peak. In addition, R. acetosella community around the temple was suggested to be removed first to preserve endemic species. For the restoration of vegetation, we suggest that Stephanandra incisa, Spiraea blumei, Weigela subsessilis, etc. should be planted after removal of I. bungeana, and F. arundinacea, C. lanceolata, Carex callitrichos var. nana.

• Journal of the Korean association of regional geographers
• /
• v.20 no.3
• /
• pp.282-299
• /
• 2014

Cette $\acute{e}$tude a pour objectif de d$\acute{e}$velopper le g$\acute{e}$otourisme des $\hat{i}$les de Geomun et de Baek dans le Parc Marin National de Dadohae pour conna$\hat{i}$tre les caract$\acute{e}$ristiques de cette r$\acute{e}$gion du point de vue $\acute{e}$cologique, historique et culturel $\grave{a}$ partir de ses ressources g$\acute{e}$omorphiques et g$\acute{e}$ologiques qui ont la haute de valeur $prot{\acute{e}}g{\acute{e}}e$. Il y a plusieurs ressources g$\acute{e}$omorphiques et g$\acute{e}$ologiques sur l'$\hat{i}$le de Baek: falaise; caverne marine; tafoni; le relief li$\acute{e}$ $\grave{a}$ les roches volcaniques. Il y a aussi plusieurs ressources historiques et culturels sur les $\hat{i}$les de Go et d'Est: le cimeti$\grave{a}$r d'arm$\acute{e}$e anglaise li$\acute{e}$e $\grave{a}$ l'occupation ill$\acute{e}$gale de l'$\hat{i}$le de Geomun en 1885; le site historique de Kim Ryu(金劉) qui a enseign$\acute{e}$ les disciples de confucianisme et qui a $succ{\acute{e}}d{\acute{e}}$ au Confucius; la for$\hat{e}$t de feuillus de zone $temp{\acute{e}}r{\acute{e}}e$ sur l'$\hat{i}$le d'Ouest et la ceinture de falaise sur l'$\hat{i}$le de Baek. Une route g$\acute{e}$otouristique part de l'$\hat{i}$le d'Ouest et continue $\grave{a}$ l'$\hat{i}$le d'Est: c'est la route $\acute{e}$cologique, historique et culturel sur l'$\hat{i}$le de Geomun. L'autre route continue de la c$\hat{o}$te de l'$\hat{i}$le de Baek: c'est la route de paysages g$\acute{e}$omorphiques et g$\acute{e}$ologiques. Nous proposons des plusieurs exemples pour d$\acute{e}$velopper le g$\acute{e}$otourisme des $\hat{i}$les de Geomun et de Baek: installation de centre visiteur et de panneaux d'explication g$\acute{e}$otouristique sur le g$\acute{e}$osite central ; monitoring environmental.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.130-136
• /
• 2009

The aim of this study was to develop a method for measuring the slumping resistance of flowable resin composites and to evaluate the efficacy using rheological methodology. Five commercial flowable composites (Aelitefil flow:AF, Filtek flow:FF, DenFil flow:DF, Tetric flow:TF and Revolution:RV) were used. Same volume of composites in a syringe was extruded on a glass slide using a custom-made loading device. The resin composites were allowed to slump for 10 seconds at $25^{\circ}C$ and light cured. The aspect ratio (height/diameter) of cone or dome shaped specimen was measured for estimating the slumping tendency of composites. The complex viscosity of each composite was measured by a dynamic oscillatory shear test as a function of angular frequency using a rheometer. To compare the slumping tendency of composites, one way-ANOVA and Turkey's post hoc test was performed for the aspect ratio at 95% confidence level. Regression analysis was performed to investigate the relationship between the complex viscosity and the aspect ratio. The results were as follows. 1. Slumping tendency based on the aspect ratio varied among the five materials (AF

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.145-153
• /
• 2009

The purpose of this study was to evaluate the effect of instrument compliance on the polymerization shrinkage stress measurements of dental composites. The contraction strain and stress of composites during light curing were measured by a custom made stress-strain analyzer, which consisted of a displacement sensor, a cantilever load cell and a negative feedback mechanism. The instrument can measure the polymerization stress by two modes: with compliance mode in which the instrument compliance is allowed, or without compliance mode in which the instrument compliance is not allowed. A flowable (Filtek Flow: FF) and two universal hybrid (Z100: Z1 and Z250: Z2) composites were studied. A silane treated metal rod with a diameter of 3.0 mm was fixed at free end of the load cell, and other metal rod was fixed on the base plate. Composite of 1.0 mm thickness was placed between the two rods and light cured. The axial shrinkage strain and stress of the composite were recorded for 10 minutes during polymerization. and the tensile modulus of the materials was also determined with the instrument. The statistical analysis was conducted by ANOVA. paired t-test and Tukey's test (${\alpha}<0.05$). There were significant differences between the two measurement modes and among materials. With compliance mode, the contraction stress of FF was the highest: 3.11 (0.13). followed by Z1: 2.91 (0.10) and Z2: 1.94 (0.09) MPa. When the instrument compliance is not allowed, the contraction stress of Z1 was the highest: 17.08 (0.89), followed by FF: 10.11 (0.29) and Z2: 9.46 (1.63) MPa. The tensile modulus for Z1, Z2 and FF was 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa, respectively. With compliance mode. the measured stress correlated with the axial shrinkage strain of composite: while without compliance the elastic modulus of materials played a significant role in the stress measurement.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.5-15
• /
• 2001

For estimating paddy field area with Landsat TM images, two dates, May 31, 1991 (transplanting stage) and August 19, 1991 (heading stage) were selected by the data analysis of digital numbers considering rice cropping calendar. Four different estimating methods (1) rule-based classification method, (2) supervised classification(maximum likelihood), (3) unsupervised classification (ISODATA, No. of class:15), (4) unsupervised classification (ISODATA, No. of class:20) were examined. Paddy field area was estimated to 7291.19 ha by non-classification method. In comparison with topographical map (1:25,000), accuracy far paddy field area was 92%. A new image stacked by 10 layers, Landsat TM band 3,4,5, RVI, and wetness in May 31,1991 and August 19,1991 was made to estimate paddy field area by both supervised and unsupervised classification method. Paddy field was classified to 9100.98 ha by supervised classification. Error matrix showed 97.2% overall accuracy far training samples. Accuracy compared with topographical map was 95%. Unsupervised classifications by ISODATA using principal axis. Paddy field area by two different classification number of criteria were 6663.60 ha and 5704.56 ha and accuracy compared with topographical map was 87% and 82%. Irrespective of the estimating methods, paddy fields were discriminated very well by using two-date Landsat TM images in May 31,1991 (transplanting stage) and August 19,1991 (heading stage). Among estimation methods, rule-based classification method was the easiest to analyze and fast to process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.1
• /
• pp.22-34
• /
• 2011

In recent years, there has been an active movement toward databasing, systematizing, and unifying environmental information. Such efforts facilitate the utilization of spatial environment planning in environment conservation officially planned at the metropolitan and provincial levels. This in turn clarifies the management direction of space, thereby serving as an effective tool with which to not only conserve land, but also provide a reasonable compromise to all the related solutions at odds with one another. As such, this study forwards a method for inclusion of spatial environment planning in environment conservation plans, paying particular attention to the place, with in such a planning method, of the natural ecosystem, arguably the most sensitive arena among environmental factors. Spatial environment planning can be broadly divided as follows: first, basic direction; second, collection of spatial information; third, compilation of status of spatial environment; and fourth, management strategy for spatial environment. In particular, the second phase, namely the collection of spatial information, delineates clearly spatial information hitherto amassed by government agencies at both the national and local levels; the ensuing lists facilitate maximum utilization of the previously accumulated data. Used during the planning phase, status maps should include not only the status of land use(land cover), but also systematic data on the superior resources of the natural ecosystem as well as the status of the given spatial environment. Establishing plans for ecological networks, their conservation, and restoration areas based on the aforementioned aspects, this study sought to formulate ways in which to spatialize environment conservation plans that encompass consideration for the natural ecosystem. Devised based previous studies and examples, the compilation of status and plans as stated, applied to Gyeonggi Province, afforded an examination of the potential applicability and usability of the proposed plans. Ultimately, these will contribute not only to the establishment of plans encompassing consideration for the value and level of significance of the given natural ecosystem in spatial development planning, but also provide fundamental data for investigating appropriateness of plans and validity of location in any regional development plan.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.10-20
• /
• 2014

Today, most roof spaces are being designed as places for resting. The use of the roof spaces needs to be raised otherwise, budgeting or costs involved can be wasteful. A well-made plan is needed to increase the use of the roof spaces. The behavior of and preference for roof spaces could differ depending on building usage because the users of these roof spaces can be different. Therefore, this study selected 4 building types depending on usage: public buildings, educational and research buildings, medical buildings, and commercial buildings. Two buildings that created roof spaces per building type were selected. A survey was undertaken of the user experience of roof spaces on the buildings. The behavior and preference of roof spaces depending on building types were analyzed and the results are as follows. The behavior of using roof spaces regarding purpose, motivation, frequency, and average length of stay were different depending on the building types. In terms of purpose, over all four building types, taking a rest was the primary reason for using roof spaces. However, talking and smoking in public buildings, smoking, taking a walk or stretching, and viewing the exterior landscape in educational and research buildings, taking a walk or stretching and talking in medical buildings, taking care of children and talking in commercial buildings were also important reasons for using roof spaces. The preference of roof space components such as plants, paving materials, and facilities were different depending on the building types. In terms of plants, the users of public buildings preferred herbaceous plants and vegetables/aquatic plants more than the users of other building types. The users of medical buildings preferred vegetables/aquatic plants, and the users of commercial buildings preferred arbores, herbaceous plants, and vegetables/aquatic plants more than the users of other building types. This study provides empirical data for the behavior and the preference of roof spaces depending on building types. These findings could provide new insights into how to increase the use of roof spaces.