• The Journal of Korean society of community based occupational therapy
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2015

Objective : The purpose of this study was to investigate the satisfaction of occupational therapy service for parents of children with disabilities using specialized child-care centers for disabled in Gyeongbuk. Methods : The subjects of this study were 104 parents who have experience in occupational therapy at 14 specialized child-care centers for disabled in Gyeongbuk. A questionnaire was conducted from July, 2014 to March, 2015. Descriptive statistics of frequency, mean, standard deviation, and One-Way ANOVA study were used to analyze data. Results : Disabled children got occupational therapy at first when they were 3.25 years, on average. Duration of occupational therapy use were 31.84 month, on average. The subjects determined to got occupational therapy mostly through consultation nurseries(40.4%). Most of them got speech therapy(78.0%) other than receiving occupational therapy service, responded very necessary to occupational therapy(69.3%). Satisfaction of occupational therapy service were 4.49 point at attitude of occupational therapists, 4.36 point at occupational therapy program, and 4.26 point at environment of occupational therapy room. Attitude of occupational therapists were the highest satisfied. Conclusion : This study would contribute to effective and meaningful occupational therapy through objective view

• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.93-100
• /
• 2019

The purpose of this study is to measure abdominal muscle thickness when Pelvic Floor contraction (PFC) and Abdominal Drawing-In Maneuver (ADIM) were separately applied and combined exercise was applied and to compare the effects of the exercise. After the pre-investigation, the subjects were given a explanation of the purpose and the method of the research and then an experiment was conducted targeting a total of 30 subjects, who voluntarily agreed with this. Thicknesses of internal oblique (IO), transverse abdominis (TrA) and external oblique (EO) were measured during a break and then three types of exercise. All the measured values of the experiment were processed using Repeated measure ANOVA, and Bonferroni method was applied. As a result, the three types of exercise showed significant differences in thicknesses of IO, TrA and EO. In conclusion, the subjects had the thickest muscles and muscular activity increased during PFC+ADIM, compared to PFC and ADIM.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.205-216
• /
• 2021

This study aims to discuss ways needed to prepare their careers through relations between the personal internal factors perceived by college students in the process of career preparation and the external factors they experience during college life. To this end, the study conducted not only a questionnaire survey of 927 students at K University in Seoul but also hierarchical multiple regression analysis, independent two sample t-test, and one-way ANOVA (analysis of variance). The study set career preparation as a dependent variable, presented research models in four steps, and the explanatory power of each model was statistically significant. According to the findings of the study, both Model 1 and Model 2, gender had a significant impact on career preparation. Also, when self-directedness was added to Model 2, self-directedness had a greater impact on career preparation than gender did. When satisfaction with extracurricular activities was added to Model 3, this factor turned out to be helpful for career preparation. When college immersion, or a sense of belonging to college, was added to Model 4, the higher the sense of belonging students perceived, the more helpful they felt it for their career preparations. This study is expected to be helpful in preparing a policy to support college students' career preparation by grasping the relations between the personal characteristics of college students and career-related activities and college immersion they experience during college life.

• Journal of the Korean Society for information Management
• /
• v.23 no.1 s.59
• /
• pp.139-158
• /
• 2006

University library in university organization needs more to innovating with through information management systems. In this paper introduced IMS to university library in Korea. In this paper investigated difference of recognition between college and university about IMS. The samples (n=67) were composed of those who had already engaged in university library and college. The results of this study were as follows; Most participants who was considerate no more important to mind for IMS introduction. Then, the results of ANOVA analysis was recognized employee's about IMS that among of the best problems was negative(-) effect to introduction necessary and introduction timeless of IMS was insignified with F=0.469(p=0.497), sig=0.05. and F=2.410(p=0.125), sig=0.05. By the way, education necessary of IMS was signified with F=7.470(p=0.008), sig=0.01. Finally, in this paper provided the fundamental data for the standardization and transparency related to policy establish of university library for introducing of IMS.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.2
• /
• pp.53-62
• /
• 2020

This study is to evaluate the accuracy of the meteorological information provided for the aircraft operating at low altitude. At first, it is necessary to identify crucial elements of weather information closely related to flight safety during low altitude flights. The study conducted a survey of pilots of low altitude aircraft, divided into pre-flight and in-flight phases, and reached an opinion that wind direction, wind speed, cloud coverage and ceiling and visibility are important items. Related to these items, we compared and calculated the accuracy of TAFs and METARs from Taean Airfield, Seosan Airport and Gunsan Airport because of their high number of domestic low-altitude flights. Accuracy analysis evaluated the accuracy of two numerical variables, Mean Absolute Error(MAE) and Root Mean Square Error(RMSE), and the cloud coverage which is categorical variable was calculated and compared by accuracy. For numeric variables, one-way ANOVA, which is a parameter-test, was approached to identify differences between actual forecast values and observations based on absolute errors for each item derived from the results of MAE and RMSE accuracy analyses. To determine the satisfaction of both normality assumptions and equivalence variability assumptions, the Shapiro-Wilk test was performed to verify that they do not have a normality distribution for numerical variables, and for the non-parametric test, Kruscal-Wallis test was conducted to determine whether or not they are satisfied.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.819-825
• /
• 2020

The purpose of this study was to evaluate the usefulness of the developed air mattress for reducing the deterioration of image quality due to the scattered radiation generated on the computed tomography equipment table. 5 cm and 10 cm thick air mattresses were developed and the image quality was measured by scanning the AAPM phantom according to thickness and thickness. Statistical significance was confirmed by One Way Analysis of Variance(ANOVA) Compared with the AAPM phantom scanned in the standard method, the image with the air mattress did not show any difference, but when the air mattress was not applied, the CT number and uniformity were low and the noise was high, and the spatial resolution Respectively. The developed air mattress has no harmful effect on the diagnostic image, it is very effective in improving the image quality and can increase the CT image quality by simply applying Air Mattress to existing equipment without using the technology applied to the latest and high-cost equipment.

• Journal of the Korean Society of Radiology
• /
• v.15 no.3
• /
• pp.281-291
• /
• 2021

This study aimed to measure the quantitative changes in images according to the use of compressed sensing in expressing the slow flow rate in TOF MRA test using magnetic resonance imaging. This study set different blood flow rate sections by using auto-injector and flow phantom and compared changes in the SNR, CNR, SSIM, and RMSE measurements by different CS factors between TOF with CS and TOF without CS. One-way ANOVA was performed to test the effect on the image induced by the increase of the CS factor. The results revealed that TOF MRA with CS significantly decreased scan time without significantly affecting SNR and CNR compared to TOF MRA with CS. On the other hand, the differences in SSIM and RMSE between TOF with CS and TOF without CS increased as the CS factor increased. Therefore, it is necessary to efficiently reduce scan time by adapting the CS technique while considering the appropriate range of the CS factor. Additionally, more studies are needed to evaluate CS factors and the similarity precision of images further.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.306-316
• /
• 2007

Based on a concept of soundscape, this study aims to investigate Koreans' preference for auditory elements, features, and impressions depending upon the season, and examine how these auditory factors of soundstape and seasons interact with each other and attempt to discover their influence on people's auditory preferences. According to an environmental psychological approach called the caption evaluation method, 45 college students examined the soundscape of Namwon City while racing the streets in four seasons. In order to analyze the interactions between seasons and such auditory factors as elements, features, and impressions, it was conducted the GLM univariate analysis and the NPAR tests for independent samples. The results of the analyses show that there are interactive effects between seasons and auditory factors like elements, features, and impressions and that the auditory factors have an effect on auditory preference. Moreover, as for seasonal preference for auditory elements, it was found that people prefer natural sound in spring, summer, and fall while they prefer social sound in winter. Concerning seasonal preference for auditory features, people place a focus on the behaviors in spring, summer, and winter while they stress the surroundings in autumn, as for seasonal preference for auditory impressions, they make much of sound characteristics in spring and winter but they value the atmosphere of streets in summer and fall. The results of this study can he utilized as useful data in determining which auditory factors among elements, features, and impressions to take into consideration in a soundscape design.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.189-195
• /
• 2022

Purpose: For orthodontic bracket bonding, light curing resin cement is widely used because the process is convenient, and it can be polymerized at the desired time. This study compared the difference of bonding strength of orthodontic resin cement according to storage condition. Materials and Methods: After acid etching the bovine enamel surface with 37% phosphoric acid, 15 orthodontic brackets for mandible incisors were bonded with Ortho Connect and Orthomite LC according to following three conditions; 1) Immediate after 4℃ refrigeration for 3 months (IR), 2) One day room temperature after 4℃ refrigeration for 3 months (OR), 3) Room temperature for 3 months (RT). The shear bond strength was measured with a universal material tester and failure pattern of the specimen was observed. Two-way ANOVA and One-way ANOVA were used at the 95% significance level. Results: Ortho Connect that was applied immediately after refrigeration showed the maximum shear bond strength. Orthomite that was applied immediately after refrigeration showed the lowest shear bond strength, and the group stored at room temperature for three months showed the highest shear bond strength, and the difference between the two groups was significant. Conclusion: Ortho Connect can be used without worrying about bond strength even if it is used immediately after refrigeration, but Orthomite should be kept at room temperature sufficiently after refrigeration.