• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.101-101
• /
• 2016

하천원격탐사는 원격탐사의 하위 개념으로서 계측하고자 하는 대상인 하천이나 호소 수체에서 발생하는 빛의 반사, 복사 또는 방출되는 양을 획득하고 분석하여 수리량, 지형 등 하천 조사에 활용하는 기법이다. 일반적으로 원격탐사는 주로 위성영상 자료를 활용하여 수행되어 자료취득비용이 고가이고 해외 위성자료에 의존하여 시공간적인 해상도가 매우 낮아 유역에 비해 공간적인 규모가 작고 변동 시간이 짧은 하천에 적용하는 데 한계가 있어 왔다. 또한, 단순한 사진촬영으로 도출할 수 있는 정보에 한계가 있고 자료를 저장 및 분석할 수 있는 기법도 부족하여 하천조사에 원격탐사를 활용한 사례가 드물었다. 그러나, 최근 드론과 같은 운반체 기술이 획기적으로 개선되고 있고 다양한 영상촬영장비의 개발과 IT기술의 발전으로 인해 위성영상에 비해 시공간적 해상도가 매우 정밀한 자료를 저렴한 비용으로 획득 가능해졌다. 또한, 매우 조밀한 파장대로 세분된 빛의 세기를 측정할 수 있는 초분광 영상을 이용한 원격탐사기법도 하천과 같은 좁은 영역에 적용이 가능해졌다. 초분광영상은 가시광선 외에 자외선과 적외선 영역에 해당하는 반사광을 200개 이상의 조밀한 파장대로 나누어 측정할 수 있어 수리량, 하상, 식생 등 하천 수체와 관련된 정보를 조사할 가능성이 증가하였다. 본 연구에서는 하천 수체에서 취득한 초분광 영상을 이용하여 하천특성과의 상관관계를 규명하고 이를 통해 초분광 영상 기반의 하천특성 계측 기법을 개발하고자 하였다. 드론과 같은 항공영상에 적용하기 전에, 우선 지상에서 측정된 초분광 영상과 하상재료 및 수심과의 상관관계를 규명하여 초분광 영상의 하천조사로의 사용 가능성을 점검해 보았다. 폭 10m, 수심 1m의 저수심의 소하천에 적용한 결과, 초분광 영상의 표준화 및 패턴 분석을 통해 수중에 위치한 하상재료를 구분할 수 있었고 주성분분석 등을 통해 수심과 상관성도 일부 도출되어 하천조사에 초분광영상이 활용될 수 있음을 확인하였다.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.250-255
• /
• 2009

This study performed and evaluated the performance test in 40 general X-ray units among diagnostic X-ray units, which were being used in hospitals of gyeongsangnam-do gimhae-si through X-ray tube variable limiting device ability test, the light field and X-ray field alignment test and collimation and beam alignment test of diagnostic X-ray unit. The results are as followings: In a variable beam limiting device ability test, the result of maximum X-ray field test showed that 4(10%) of were incongruent while the result of minimum X-ray field test represented that 5(12.5%) of were incongruent. The result of the light field and X-ray field alignment test showed 23(57.5%) of were within 2% of maximum permissible level and the other 17(42.5%) units were misalignment. The result of beam alignment test represented that 11(27.5%) coincided and another 11(27.5%) within $0.5^{\circ}$ respectively, 10(25%) were $0.6^{\circ}-1.5^{\circ}$ intervals, 7(17.5%) were $1.6^{\circ}-3^{\circ}$ and 1(2.5%) were more than $3^{\circ}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.383-383
• /
• 2015

하천의 하상고 측량은 하상변동 분석, 서식처 구조 등을 이해하는데 매우 중요한 정보를 제공한다. 하지만, 현재까지 대부분의 하상고 측량은 일정한 간격의 하천 단면 측량에 의해서 행해져 왔다. 최근 GPS와 다중 빔 측심기를 이용하여 하상의 3차원적 형상을 조밀하게 측량하고 있으나 비용이 많이 들기 때문에 긴 하천 구간을 전부 측량하지는 못하고 특정한 부분에 대해서만 집중하고 있다. 항공 LiDAR의 경우 넓은 지역에 대해 신속하고 고해상도로 지형을 측량할 수 있으나 수중 투과 장비가 고가이며, 일반 적색 레이져 기반 LiDAR는 수중을 측정하지 못하여 하상 측량에 한계가 있다. 이에 대한 대안으로 활용할 수 있는 방법은 광학 기반의 원격 탐사에 의한 수심 측량 방법이다. 이 방법은 얕은 수심의 하천에 대한 활용되었는데, 광학 센서 이미지나 항공사진 등을 이용한다. 본 연구에서는 저고도에서 촬영한 고해상도 디지털 항공사진을 이용하여 모래하천의 수심을 추정하였다. 이 방법은 항공사진의 적색 및 녹색 색상값과 현장에서 정밀한 측위 하에 측량한 수심값 사이의 관계를 이용한다. 이를 통해 보정식을 수립하고 검사 자료를 이용하여 검증한 후 항공사진의 해당 지역에 대해 수심 부분을 마스킹 처리하여 하상고를 구축하였다. 검사 자료에 대한 RMSE는 약 12 cm로 나타났다. 이를 활용하여 대상 구간의 3차원적 지형 형상을 구축하였다.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.710-721
• /
• 2010

Recently, for the advancement of embedded technology about mobile device, a new kind of service, mash-up is appeared. It is service or application combining multimedia content making tool or device and web-GIS(geographic information system) service in the mobile environment. This service can be ease to use for casual user and can apply in various ways. So, It is served in web 2.0 environment actively. But, in the mashup service, because generated multimedia contents linked with web map are new type of multimedia contents which include user's migration routes in the space such as GPS coordinates. Thus, there are no protection ways for intellectual property created by GIS web-map service users and user's privacy. In this paper, we proposed a location and user information hiding scheme for GIS web-map service. This scheme embeds location and user information into a picture that is taken by camera module on the mobile phone. It is not only protecting way for user's privacy but is also tracing way against illegal photographer who is peeping person through hidden camera. And than, we also realized proposed scheme on the mobile smart phone. For minimizing margin of error about location coordinate value against contents manipulating attacks, GPS information is embedded into chrominance signal of contents considering weight of each digit about binary type of GPS coordinate value. And for tracing illegal photographer, user information such as serial number of mobile phone, phone number and photographing date is embedded into frequency spectrum of contents luminance signal. In the experimental results, we confirmed that the error of extracted information against various image processing attacks is within reliable tolerance. And after file format translation attack, we extracted embedded information from the attacked contents without no damage. Using similarity between extracted one and original templete, we also extracted whole information from damaged chrominance signal of contents by various image processing attacks.

• Composites Research
• /
• v.35 no.3
• /
• pp.196-200
• /
• 2022

Split Hopkinson Pressure Bar (SHPB) is a general test equipment for measuring the mechanical properties of high modulus metal and composite materials at high strain rate. However, for the soft plastic material, it is difficult to hold the specimen and achieve dynamic stress equilibrium due to the weak transmitted signals. In this study, SHPB test apparatus were designed to measure accurately the high strain rate stress-strain curve of the soft plastic materials by changing the incident bar materials and the shape of the specimen holder parts. In addition, to verify the high strain-rate tensile strain data obtained from SHPB, the strain distribution of the specimen was measured and analyzed with a high-speed camera and the digital image correlation (DIC), which was compared with the strain history measured from SHPB.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.217-239
• /
• 1999

Investigation methods of cut slope are conducted generally only geological surface survey to gain engineering geological data of cut slopes. These methods have many problems such as limitation of investigation for a special area. So geophysical investigations such as geotomography, seismic and electrical resistivity methods have been used to search for failure surface in potential failure slopes or failed slopes. But investigation method using the borehole camera is recently a used method and it is thought that this method is more reliable method than other investigation methods because of being able to see by the eyes. Therefore, this paper was conducted investigations of 4 boleholes and BIPS (Borehole Image Processing System) to search for potential sliding surfaces and was applied to obtain information of discontinuity on failed highway slope. As the results of BIPS, we could decide potential sliding surface in the slope and conducted to check slope stability. And decided slope stability measures.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.127-133
• /
• 2014

Purpose: Low dose of PET/CT is important because of Patient's X-ray exposure. The aim of this study was to evaluate the effectiveness of low-dose PET/ CT image through the CTAC and QAC of patient study and phantom study. Materials and Methods: We used the discovery 710 PET/CT (GE). We used the NEMA IEC body phantom for evaluating the PET data corrected by ultra-low dose CT attenuation correction method and NU2-94 phantom for uniformity. After injection of 70.78 MBq and 22.2 MBq of 18 F-FDG were done to each of phantom, PET/CT scans were obtained. PET data were reconstructed by using of CTAC of which dose was for the diagnosis CT and Q. AC of which was only for attenuation correction. Quantitative analysis was performed by use of horizontal profile and vertical profile. Reference data which were corrected by CTAC were compared to PET data which was corrected by the ultra-low dose. The relative error was assessed. Patients with over weighted and normal weight also underwent a PET/CT scans according to low dose protocol and standard dose protocol. Relative error and signal to noise ratio of SUV were analyzed. Results: In the results of phantom test, phantom PET data were corrected by CTAC and Q.AC and they were compared each other. The relative error of Q.AC profile was been calculated, and it was shown in graph. In patient studies, PET data for overweight patient and normal weight patient were reconstructed by CTAC and Q.AC under routine dose and ultra-low dose. When routine dose was used, the relative error was small. When high dose was used, the result of overweight patient was effectively corrected by Q.AC. Conclusion: In phantom study, CTAC method with 80 kVp and 10 mA was resulted in bead hardening artifact. PET data corrected by ultra- low dose CTAC was not quantified, but those by the same dose were quantified properly. In patients' cases, PET data of over weighted patient could be quantified by Q.AC method. Its relative difference was not significant. Q.AC method was proper attenuation correction method when ultra-low dose was used. As a result, it is expected that Q.AC is a good method in order to reduce patient's exposure dose.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.4
• /
• pp.7-12
• /
• 2007

With the advent of digital cinema, more and more movies are digitally produced, distributed via digital medium such as hard drives and network, and finally projected using a digital projector. However, digital cameras capable of shotting at 2K or higher resolution for digital cinema are still very expensive and bulky, which impedes rapid transition to digital production. As a low-cost solution for acquiring high resolution digital videos, we propose a hybrid camera consisting of a low-resolution CCD for capturing videos and a high-resolution CCD for capturing still images at regular intervals. From the output of the hybrid camera, we can synthesize high-resolution videos by software as follows: for each frame, 1. find pixel correspondences from the current frame to the previous and subsequent keyframes associated with high resolution still images, 2. synthesize a high-resolution image for the current frame by copying the image blocks associated with the corresponding pixels from the high-resolution keyframe images, and 3. complete the synthesis by filling holes in the synthesized image. This framework can be extended to making NPR video effects and capturing HDR videos.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.3 s.43
• /
• pp.457-468
• /
• 1993

This study was conducted to investigate the repeat test rate for diagnosis at a tertiary hospital for the outpatients who were referred themselves to the hospital by the clinics and other medical facilities. The study population consisted of 498 patients who visited outpatient department of internal medicine, general surgery, orthopedic surgery and neurosurgery in the hospital between March 16 and April 11, 1992. This study was surveyed by the questionnaire about the tests for diagnosis at first level medical facilities, and then, was investigated by the medical record about the tests for diagnosis at a tertiary hospital. The proportion of test among the patients who utilized the first level medical facilities was 20.9% for the X-ray test, 10.6% for the urinalysis, 9.0% for the electrocardiogram, 3.4% for the computer tomogram and 6.4% for the ultrasonogram. At the tertiary hospital, the X-ray test was 45.2%, the liver function test was 24.1%, the urinalysis was 19.1%, and the electrocardiogram was 15.7%. The proportion of patients who possessed results of test for diagnosis at the first level medical facilities was 76.5% for the computer tomogram, and 31.3% for the ultrasonogram. As the repeat test rate between the first level medical facilities and the tertiary hospital, the thyroid function test was the first rank as 71.4%, the second rank was the routine CBC as 67.9%, and the third rank was the X-ray test as 64.4%. But among the patients that brought the result for tests at the first level medical facilities, the repeat test rate was as follow : the routine CBC was 75.0%, the liver function test was 72.1%, and the computer tomogram was 15.4%.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.295-302
• /
• 2014

Essential to the establishment of such 3D spatial information are the laser scanning technology to obtain high-precision 3D point group data and the photography-metric camera to obtain high-resolution multispectral image information. The photography-metric camera, however, lacks in usability for its broad scope of utilization due to the high purchase price, difficult purchase channel, and low applicability. This study thus set out to investigate a technique to establish multi-dimensional ortho-image data with a single lens reflex digital camera of high speed and easy accessibility for general users. That is, the study remodeled a single lens reflex digital camera and calibrated the remodeled camera to establish 3D multispectral image information, which is the essential data of 3D spatial information. Multi-dimensional ortho-image data were collected by surveying the reference points for stereo photos, taking multispectral shots of the objects, and converting them into ortho-images.