• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1731-1737
• /
• 2007

This paper considers subway routing problem. Given a schedule of train to be routed by a railway stock, the routing problem determines a sequence of trains while satisfying turnaround time and maintenance restrictions. Generally, the solution of routing problem is generated from set partition formulation solved by column generation method, a typical integer programming approach for train-set. However, we find the characteristics of metropolitan subway which has a simple rail network, a few end stations and 13 departure-arrival patterns. We reflect a turn-around constraint due to spatial limitations has no existence in conventional railroad. Our objective is to minimize the number of daily train-sets. In this paper, we develop two basic techniques that solve the subway routing problem in a reasonable time. In first stage, we formulate the routing problem as a Min-cost-flow problem. Then, in the second stage, we attempt to normalize the distance covered to each routes and reduce the travel distance using our heuristic approach. Applied to the current daily timetable, we could find the subway routings, which is an approximately 14% improvement on the number of train-sets reducing 15% of maximum traveling distance and 8% of the standard deviation.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.336-341
• /
• 2014

The articulated structures seen in train or tram applications are being applied in road transportation systems, for use in mass passenger transit. When articulated vehicles are driven on public roads, they no longer follow a guided track. Therefore, there are a lot of control elements that need to be considered, such as turning radius, swept path width, off-tracking, and swing-out. Some of the currently available articulated vehicles on roads are equipped with an independent drive system; a system that has one motor at each wheel. Through this drive system, each wheel can be independently controlled, making precise and quick dynamic stability control possible. In this paper, we propose a torque distribution algorithm that can reduce the overall turning radius of the articulated vehicle, which has been verified through dynamic simulation.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.275-284
• /
• 2021

In this paper, we study whether customizing at the self-driving shared vehicle boarding stage can satisfy ownership satisfaction. To this end, a preliminary survey was conducted on the general public on the factors of satisfaction/uncomfortable in the current shared vehicle use along with a prior research survey. Subsequently, we validate the preference for customizing elements and their impact on ownership satisfaction through CVT. Pre-investigation has shown that olfactory and interaction elements give greater satisfaction to ownership satisfaction, and CVT results show that the customizing of boarding elements will enable the satisfaction of ownership satisfaction.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.733-746
• /
• 2021

Purpose: This study was conducted for the purpose of selecting important events from among various events that may pose a risk to railway passengers. For this purpose, opinions of various railroad vehicle passengers and railway operator workers were investigated and analyzed. Method: The survey was conducted on 1,000 men and women in their 20s and 60s and 429 workers at 11 company across the country. A survey was conducted on the dangerous situations that may occur in subways, general railroads and high-speed rail vehicles targeting passengers. For railway operator workers, the questionnaire is limited to subway vehicles. Result: Among the passenger risk factors(abnormal behavior and dangerous situations) selected based on the frequency and importance of occurrence of passenger risk factors, the main risk factors are selected 'car door jamming', 'sexual harassment', 'intoxicating behavior', 'fighting' /assault', 'wandering around', and 'not wearing a mask'. Conclusion: The major risk factors affecting passengers were selected by surveying passengers and railway operators. we plan to develop a CCTV detection system with AI technology that can quickly and continuously detect the major risk factors of railway vehicles selected as a result of this study.

• Journal of Advanced Technology Convergence
• /
• v.2 no.3
• /
• pp.17-24
• /
• 2023

I am designing a research paper with the aim of studying hybrid vehicles. Hybrid vehicles, as the next-generation automobiles, feature a combination of internal combustion engines and battery engines, resulting in a revolutionary reduction in fuel consumption and harmful gas emissions compared to conventional vehicles. The electric motor in hybrid cars derives power from a high-voltage battery installed within the vehicle, which is recharged during vehicle motion. In contrast to traditional cars, which often experience energy losses due to idling caused by traffic congestion, hybrid systems optimize efficiency by skillfully managing the interplay between the internal combustion engine and the electric motor. This approach effectively addresses the inherent drawbacks of gasoline or diesel engines.Hybrid cars offer an array of benefits, including improved fuel efficiency, environmental friendliness, cost-effectiveness, and reduced noise emission. Consequently, they are progressively becoming a favored alternative among a growing number of individuals. This research endeavor has the potential to contribute towards curbing environmental pollution and dedicating efforts to future automotive research.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.155-158
• /
• 2003

물류센터의 위치선정문제 및 차량운송계획문제 등 물류시스템계획문제에서 거리산정문제를 매우 중요한 문제이며 물류비용의 주요 요인이 되고있다. 지금까지의 거리산정문제는 기하학적거리 및 지역도로와 교통조건을 고려한 일반거리, lp-Distance, 등의 방법들을 활용하고 있다. 최근에는 GIS(Geographical Information System)기반에서의 2차원 평면상의 GIS거리(2-D 거리)를 사용하는 방법을 많이 활용하고 있다. 이러한 방법은 지형적인 여건과 고도차이에 따른 실제거리와는 많은 차이가 있다. 본 연구에서는 이러한 2D기반의 디지털 맵을 3-D 기반의 디지털 맵으로의 변환을 통해 2D GIS 거리산정 방법을 확장하여 3-D기반의 GIS거리 산정 방법을 개발하였다. 이러한 3가지의 거리산정방법; lp-Distance, 2-D 기반의 GIS거리산정 방법 및 3-D기반의 GIS거리산정 방법을 부산지역의 차량운송계획문제(VRP)에 응용하고 그 결과를 비교 분석하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.69-73
• /
• 2006

일반신호기는 정해진 신호시간에 따라 독립적으로 운영되는 정주기신호기와 TOD(Time of Day)식 신호기이다. 이런 일반신호기의 단점으로는 변동되는 교통량에 대응이 불가능하고, 교통량에 관계없이 연속적으로 신호체계가 이루어지기 때문에 차량의 이동성이 비효율적으로 됨에 따라 생산성 감소, 에너지낭비 및 자동차 배기가스 증가를 초래하고 있다 이를 개선하기 위한 방법으로서 본 논문에서는 4차선의 주차로와 2차선의 소방로로 이루어진 교차로에서 주차로의 교통량이 많을 경우, 차로에서는 녹색불이 지속되어 교통의 흐름을 원활하게 해주며, 소방로에서 차량이 일정량 증가하게 되면, 주차로의 신호등이 적색등을 바꾸어 소방로의 차량이 교통되도록 하는 지능형 교통체계에 대해 VHDL을 이용하여 지능형 신호체계 시스템을 설계하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.555-558
• /
• 2011

최근 차량의 멀티미디어 장치들이 증가하면서 이 장치들을 네트워크로 연결하여 멀티미디어 데이터를 송 수신해서 사용할 수 있는 MOST 네트워크를 적용한 차량들이 늘어나고 있다. 본 논문에서는 MOST 네트워크를 적용한 장치들을 제어하기 위한 HMI를 구현하는 방법에 대하여 연구하였다. MOST는 네트워크 전체를 관리하는 하나의 마스터와 하나 이상의 슬레이브 장치들로 구성된다. 또한 MOST 네트워크에 연결된 장치를 제어하는 컨트롤 인터페이스가 있는데 이를 HMI라고 한다. 일반적으로 HMI는 마스터 역할을 하면서 네트워크의 각 각 장치들을 제어한다. 멀티미디어 장치 중 차량에서 일반적으로 많이 사용되는 장치가 오디오 장치이며 MOST 네트워크에서 사용되는 대표적인 장치이기도 하다. 본 논문에서는 MOST 네트워크의 대표적인 장치인 오디오 장치를 제어하는 HMI 인터페이스 프로그램을 구현하였으며, MOST 오디오 장치를 네트워크로 연결하여 구현한 프로그램을 테스트한 결과 정상적으로 동작함을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1591-1601
• /
• 2013

In this study, It is conducted for novice drivers about driving behavior and psychological characteristics analysis to reduce traffic accident risk and provide the basic data of education program development. Therefore, this study classified by the category-specific characteristics and hazard prediction through survey of the novice driver and unpredictable behavior and psychological characteristics were studied. The novice and general characteristics and driving behavior with vehicle simulators, comparison and analysis of the novice driver traffic safety education basic research direction based on the statistical results. Prediction the results of this study, the Hazard of the driver, speeding, traffic violation, information providing omission, abrupt change, the number of accidents in all areas novice driver is high compared to the general driver. In addition, Novice driver showed a statistically significant level of Hazard compared to the general driver target novice drivers and the general ability to predict Hazard of violation, abrupt change, and a number of traffic accidents were omitted level of speeding and other information providing level drivers all showed similar results. Vehicle simulator. The experimental results showed that novice drivers compared to drivers poorly overall driving performance. It showed a notable difference in the number of collisions, especially novice drivers compared to drivers in complex road traffic conditions due to a lack of driving experience and learning ability are considered.

• The KIPS Transactions:PartB
• /
• v.8B no.2
• /
• pp.195-200
• /
• 2001

본 논문에서는 실제 입력 차량 영상으로부터 명암도 변화 정보와 원형 패턴 벡터를 이용하여 차량 번호판을 인식하는 알고리즘을 제안하였다. 일반적으로 차량 영상에서는 번호판 영역에서 문자와 배경이 뚜렷하게 구별되고, 일정한 명암도 변화를 가지면서 번호판 이외의 다른 영역 보다 빌집도가 높은 특성이 있다. 따라서 본 논문에서는 이러한 성질을 이용하여 먼저 명암도 변화값을 사용하여 번호판을 추출하도록 하였으며 영상 입력 과정에서 외부 환경에 따라 차량 영상이 어둡거나 밝게 입력될 경우에도 동일한 추출 성능을 얻기 위하여 밝기 보정 과정을 수행하였다. 또한 추출된 번호판 영역으로부터 입력 문자의 크기, 이동 및 회전에 무관한 특성 추출을 위해 원형 패턴 벡터를 이용하여 차량 번호를 인식하도록 하였다. 제안한 알고리즘을 적용한 결과 번호판 추출이 가능하였으며 기존의 방법에 비해 계산 속도가 향상되어 실시간 처리의 가능성을 제시하였다.