• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.61-67
• /
• 2012

The in-wheel motor used in green car was designed and constructed for an electric direct-drive traction system. It is difficult to connect cooling water piping because the in-wheel motor is located within the wheel structure. In the air cooling structure for the in-wheel motor, a outer surface on the housing is provided with cooling grooves to increase the heat transfer area. In this study, we carried out the analysis on the fluid flow and thermal characteristics of the in-wheel motor under the effects of motor speed and heat generation. In order to check the problem of heat release, the analysis has been performed using conjugate heat transfer (conduction and convection). As a result, flow fields and temperature distribution inside the in-wheel motor were obtained for base speed condition (1250 rpm) and maximum speed condition (5000 rpm). Also, the thermo-flow characteristics analysis of in-wheel motor for vehicles was performed in consideration of ram air effect. Therefore, we checked the feasibility of the air cooling for the housing geometry having cooling grooves and investigated the cooling performance enhancement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1159-1160
• /
• 2013

• 한국지능시스템학회논문지
• /
• 제21권1호
• /
• pp.80-85
• /
• 2011

본 논문은 인휠형 휠체어에 있어 휠 림에 걸리는 외력을 차량의 전압과 회전 속도를 통해 예측하고 이를 통해 각 바퀴에 사용자의 힘에 따라 차량의 방향 및 속도를 제어할 수 있도록 고안된 제어기 설계에 관한 논문이다. 최근 노인 인구의 증가로 인해 노인 및 장애인을 위한 이동기기에 대한 관심이 증가되고 있다. 특히 많은 수의 고령자들이 휠체어를 이용하고 있다. 하지만 고령자의 경우 수동 휠체어 사용 시 국내 지형상의 문제로 인해 구동에 어려움을 겪는다. 또한 전동 휠체어의 경우 조이스틱으로 구동하므로 하체 근력 약화로 인해 휠체어를 이용하는 고령자의 경우, 상체 근력 또한 약화될 수 있다. 이를 극복하기 위해 림(rim)에 힘이 가해지는 힘의 크기를 파악하여 이에 상응하는 모터를 구동시키는 힘 보조형 인휠 전동기에 대한 연구가 진행되고 있다. 하지만 대부분의 힘 보조형 인휠 전동기의 경우 힘의 크기를 측정하기 위한 센서 모듈이 장착되어야 하며 이를 위해 힘의 크기를 측정하기 위한 별도의 림을 설계해야 하는 등 기구적 장치가 요구된다. 이에 본 논문에서는 이러한 힘의 크기를 측정하기 위한 림 설계 대신에 모터의 수학적 모델을 기초로 모터에 전달되는 전압과 바퀴의 현재 속도를 토대로 인휠형 모터에 걸리는 외력을 추정하고 이를 토대로 사용자의 이동 속도와 방향을 추정하여 모터를 이동시킬 수 있도록 하였다. 본 논문은 제안된 수학적 모델을 기초로 사용자의 구동 의지력을 정확하게 측정할 있었다. 또한 이를 기초로 한 제어기를 적용할 경우 인휠 휠체어를 사용자의 의지에 따라 이동할 수 있음을 시뮬레이션을 통해 검증하였다.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.72-80
• /
• 2013

For the proper cooling of in-wheel motor, the cooling channel should have the characteristics which are low pressure drop and adequate cooling oil supply to motor part. In this study, the flow performance of cooling channel for in-wheel motor was evaluated and the shape of the channel was optimized. First, the pressure drop and flow distribution characteristics of the initial channel model were evaluated using numerical analysis. Also, by the result of analysis and design modification, 4 design parameters of the channel were selected. Second, using the Taguchi optimal method, the cooling channel was optimized. In the method, nine models with different levels of the design parameters were generated and the flow characteristics of each models was estimated. Base on the result, the main effect of the design parameters was founded and optimized model was obtained. For the optimized model, the pressure drop and oil flow rate were about 0.196 bar and 0.207 L/min, respectively. The pressure drop decreased by about 0.3 bar and the oil flow rate to the motor part increased by about 0.2 L/min compared to the initial model.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.36-42
• /
• 2013

Recently, the automobile of the future will be able to substitute an electric vehicle for an internal combustion engine, so the following research is actively in the process of advancing. A traction motor is one of the core parts which compose the electric vehicle. Especially, it is difficult to connect cooling water piping to an in-wheel motor because the in-wheel motor is located within the wheel structure. This structure has disadvantage for closed type and air cooling, so the cooling design of motor housing and internal in-wheel motor is important. In this study, thermo-flow analysis of the in-wheel motor for vehicles was performed in consideration of ram air effect. In order to improve cooling efficiency of the motor, we variously changed geometries of housing and internal shape. As a result, we found that the cooling efficiency was most excellent, in case the cooling groove direction was same with air flow direction and arranged densely. Furthermore, we investigated the cooling performance enhancement with respect to variable geometries of internal in-wheel motor.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.11-17
• /
• 2015

Recently, the in-wheel motor vehicle is rapidly developed to solve energy exhaustion and environmental problems. Especially, it has the advantage of independently driving the torque control of each wheel in the vehicle. However, due to the weight increase of wheel, the comfort of vehicle riding and performance of road holding become worse. In this paper, to compensate the poor performance, a simultaneous control of the driving torque and semi-active suspension system is investigated. A vehicle model is generated using CarSim Software and validated by field tests. Co-simulation of CarSim and MATLAB/Simulink with control logics is carried out, and it is found that simultaneous control of the driving torque and semi-active suspension system can improve driving stability and durability of the in-wheel motor system.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.1-6
• /
• 2014

In-wheel driving inverter inside engine room sometimes operates in the harsh environment like high temperature of about $105^{\circ}C$. Especially, the size and power density of the inverter has become smaller and more increased. Thus, it is essential to manage the temperature of the inverter with IGBT (Insulated Gate Bipolar Transistor) switching devices for performance and endurance, because the temperature can be getting increase. In this paper, we performed the thermal flow analysis of inverter models with wave type and pin fin type cooling channels, and investigated the heat transfer characteristics of the inverter models using cooling water on channels at 8 L/min and $65^{\circ}C$. Also, we compared the thermal performance under various conditions such as coolant flow rate and layered power module structure. Therefore, we determined the feasibility of the initial inverter models and the thermal performance enhancement.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.58-65
• /
• 2013

In this paper, we propose that a model based design for an electric motor cycle system using ASM (Automotive Simulation Models). Before prototyping a realistic electric motorcycle, a reliable simulation program is required to test the capacities of the power sources and optimize the parameters of an electric motorcycle. Because ASM is based on Simulink, we can design the drivetrain and powertrain of the vehicle model systems easily. To verify the electric motorcycle system analysis of design parameters such as max power, capacity, state of charge and slope angle is carried out by the simulation and experimental method. The predicted results by the development model were in good agreement with the experimentally obtained results. Therefore, the proposed electric motorcycle model can effectively reduce the expenses during the designing of an electric motorcycle system.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.439-446
• /
• 2016

An in-wheel motor vehicle is a type of car that is equipped with an electric motor for each wheel. It is possible to acquire vehicle stability through a seperate driving torque control per wheel, since it directly generates the driving torque via the wheel motors. However, the vehicle ride comfort and road holding performance worsen depending on the increase of the wheel weights. In order to compensate for the impaired performance, an integrated chassis control system of the rear in-wheel motor vehicle is proposed. The proposed integrated chassis control system is composed of a driving torque control system, a semi-active suspension system, and an ESC system. According to the vehicle dynamic simulation of an in-wheel motor vehicle equipped with the integrated chassis control system, it is found that the system can improve the driving stability, ride comfort, and driving efficiency of the in-wheel motor vehicle.

• 융합신호처리학회논문지
• /
• 제21권1호
• /
• pp.21-28
• /
• 2020

본 논문에서는 새로운 형태의 전동 외발 손수레를 제안하였다. 제안된 전동 외발 손수레는 작업 동작을 감지하여 작업자의 의도에 따라 안전하고 균형을 잃지 않도록 하면서 자동으로 외발 손수레를 이동시킬 수 있도록 해 준다. 작업자가 손수레의 손잡이를 잡고 위 아래로 기울이면 외발 손수레에 장착된 방위각 센서를 이용하여 전후 방향의 각도인 피치각을 감지하고 이를 전후진 이동 의도로 간주하여 각도의 크기에 비례하는 속력으로 손수레의 바퀴를 가감속 제어하여 전후진시킨다. 또한 기존 손수레와 달리 적재함에도 추가의 자유도를 부가하여 회전할 수 있도록 하였고, 작업 중 손수레가 좌우 방향으로 기울어질 때 기울기인 롤각을 감지하고 이를 기반으로 하여 적재함이 항상 지면과 수평을 유지할 수 있도록 위치 제어하여 작업자가 손수레의 균형을 잃지 않고 안전하고 쉽게 손수레를 운전할 수 있도록 해 준다. 농업 현장이나 산업 현장에서 실제로 사용할 수 있도록 DC 모터와 인휠모터, 모터 드라이버, 2축 방위각 센서와 저가의 마이크로 컨트롤러를 사용하여 경제적이고 효율적인 제어 시스템을 구성하고 기구부 설계 제작도 수행하였다. 또한 피치각의 변화만 있는 경우, 롤각의 변화만 있는 경우, 그리고 피치각과 롤각이 동시에 변화하는 경우에 대한 실험을 통해 개발된 전동 외발 손수레의 안정성과 유용성을 검증하였다.