• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.1-8
• /
• 2017

본 연구에서는 인휠 전기구동 시스템의 장점을 바탕으로 첨단능동안전지원 기술의 일종인 적응순항제어(Adaptive Cruise Control, ACC) 알고리즘의 고도화 방안을 제시한다. 본 연구에서 대상 차량은 전륜은 엔진에 의해, 후륜은 인휠모터에 의해 구동되는 4륜 하이브리드 구동계를 갖는 것을 특징으로 하는데, 이러한 구성은 기존 내연기관 차량을 개선하여 차량의 출력을 증가시키거나 4륜 하이브리드 형태로의 변화를 용이하게 하는 장점이 있다. 본 연구에서는 이러한 차량의 구성을 바탕으로 기본 상태에서는 엔진만을 이용하여 차간거리 제어를 수행하되, 젖은 노면 등 주행 환경에서 제어오차가 커지게 되면 후륜의 인휠모터를 구동하여 제어성능을 확보할 수 있는 ACC 알고리즘을 제안한다. 제안된 ACC 알고리즘은 상기와 같은 방법으로 ACC 제어성능을 최적화함과 동시에 기존 4륜 자동차가 갖는 장점을 그대로 유지하도록 한다. 또한 본 연구에서는 고정밀 동역학 SW를 기반으로 대상 인휠모터 및 인휠 하이브리드 구동계, 해당 구동계 기반의 ACC 제어시스템을 모델링하였으며, 이를 통해 시뮬레이션 환경을 기반으로 제안된 알고리즘의 검증 결과를 제시한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.878-879
• /
• 2023

본 프로젝트에서는 BLDC 인휠모터를 사용하여 조향각에 제약이 없는 다자유도 기동 모빌리티 플랫폼을 구현하고 로봇 모듈화로 정비 편의성과 범용성을 높인 자율 모빌리티 플랫폼의 개발로 사용편의성 뿐만 아니라 산업 전반에서 발생하는 안전사고 리스크 관리에 도움이 되고자 한다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.76-82
• /
• 2014

In this paper, an optimal power distribution algorithm is proposed for the small electric vehicle with front in-line and rear in-wheel motors. First, it is assumed that the vehicle driving torque and velocity are given conditions. And, an optimal problem is defined that finding the front and rear motor torques which minimizes the battery power. From the above optimization problem, the optimized front-rear motor torque distribution map is obtained. And, the vehicle simulations are performed to verify the performance of the optimal power distribution algorithm which is proposed in this study. The simulations are performed based on the federal urban driving schedule for two cases which are constant ratio power distribution, and optimal power distribution. From the simulation results, it is found that the optimal power distribution shows the 6.3% smaller battery energy consumption than the constant ratio power distribution.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.206-211
• /
• 2011

In this paper, a control algorithm for the improvement of yaw and velocity stability of electrical vehicle with two or four in-wheel motors is proposed. The vehicle is modeled with independently operative in-wheel motor wheels. Different frictions on the wheels are regarded as disturbances, which causes driving instability. In this situation the proposed algorithm enables stabilizing the yaw motion and velocity of vehicle simultaneously. The proposed PID controller is composed with two techniques, which enhance the disturbance reject and point tracking performances. One is nonlinear gain function and the other one is improved integral controller operating as time based weight function. Simulation is conducted to reveal its efficient performance.

• 자동차안전학회지
• /
• 제13권1호
• /
• pp.6-13
• /
• 2021

This paper presents yaw moment control for modification of steering characteristic in rear-driven vehicle with front in-wheel motors (IWMs). The proposed control algorithm is designed to modify yaw rate response of the test vehicle. General approach for modification of steering characteristic is to define the desired yaw rate and track the yaw rate. This yaw rate tracking method can cause the chattering problem because of the IWM actuator response. Large overshoot and settling time in IWM torque response can amplify the oscillation in control input and yaw rate. To resolve these problems, open-loop IWM controller for cornering agility was designed to modify the understeer gradient of the vehicle. The proposed algorithm has been investigated via the computer simulations and the vehicle tests. The performance evaluation has been conducted on dry asphalt using E-segment test vehicle. The performance of the proposed algorithm has been compared to general yaw rate tracking algorithm in the vehicle tests. It has been shown that the proposed control law improved the cornering agility without chattering problem.

• 전력전자학회지
• /
• 제26권5호
• /
• pp.39-43
• /
• 2021

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1067-1068
• /
• 2012

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.91-97
• /
• 2012

It is being accelerated to develop environment-friendly vehicles to solve problems on the energy and environment of earth. The electric driving motor commonly installed in these vehicles has the excellent control capability such as fast response and accurate generation to torque control command. Especially, in-wheel motor has the additional merit such as independently driving each wheel in vehicle. Recently, being developed various control algorithm to enhance the safety and stability of vehicle motion using actively the merits of in-wheel motor. In addition to that, being issued the possibility of enhancing the ride comfort and attitude of vehicle motion such as pitching and rolling. In this paper, investigate the theoretical relationship between the braking/driving force and the motion of sprung mass of vehicle and propose the control method to enhance the ride comfort and attitude of vehicle motion. The proposed control method is proved through the simulation with vehicle model provided by TruckSim software which is commercial one and specializes in vehicle dynamics.

• 유공압시스템학회논문집
• /
• 제7권2호
• /
• pp.7-12
• /
• 2010

In these days, the researches about hybrid and fuel cell electric vehicles are actively performed due to the environmental contamination and resource exhaust. Specially, the technology of regenerative braking, converting heat energy to electric energy, is one of the most effective technologies to improve fuel economy. This paper developed a regenerative braking control algorithm that is considered vehicle stability. The vehicle has a inline motor at front drive shaft and has a EHB(Electo-hydraulic Brake) system. The control logic and regenerative braking control algorithm are analyzed by MATLAB/Simulink. The vehicle model is carried out by CarSim and the driving simulation is performed by using co-simulation of CarSim and MATLAB/Simulink. From the simulation results, a regenerative braking control algorithm is verified to improve the vehicle stability as well as fuel economy.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.29-34
• /
• 2014

Cooling the in-wheel motor in electric vehicles is critical to its performance and durability. In this study, thermal flow analysis was conducted by evaluating the thermal performance of two conventional cooling models for in-wheel motors under the continuous rating base speed condition. For conventional model #1, in which cooling oil was stagnant in the lower end of the motor, the maximum temperature of the coil was $221.7^{\circ}C$; for conventional model #2, in which cooling oil was circulated through the exit and entrance of the housing and jig, the maximum temperature of the coil was $155.4^{\circ}C$. Therefore, both models proved unsuitable for in-wheel motors since the motor control specifications limited the maximum temperature to $150^{\circ}C$.