• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.7
• /
• pp.17-26
• /
• 1999

In this paper, Bit selectable and Bi-directional Interface Device is described, which can communicate data with the peripheral devices. Specially, an algorithm of truth-table comparison that synthesizes the pulse-type sequential circuit pulse has been proposed to design the Interrupt Generator, and implemented in designing the Interrupt Register. Also, a description of the asynchronous design method is given to remove the clock skew phenomenon, and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.7ns.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.437-441
• /
• 2010

A new application area in which wireless sensor networks are applied requires the performance of more elaborated and complicated task and the completion of those tasks within a time limit. Until now, it is, however, insufficient to do research on the mechanism of handling interrupt based on real-time sensor operating systems which carefully consider the limitation of resources of sensor nodes and the property of tasks which is executed in a wireless sensor network area. In this paper, the requirements satisfying real-time in sensor operating systems are analyzed and based on this, a system is designed and implemented. In addition, the proposed mechanisms are confirmed by several verification methods, and the efficiency of the performance and the satisfaction of those requirements for real-time are verified by simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.66-74
• /
• 1985

An idea is presented in this paper that control panel be implemented with a ${\mu}$-processor instead of interrupt based logic circuits. To prove that the idea is reasonable, a ${\mu}$-computer controlled traffic light control system is chosen as a model, and its control panel is imple-mented witll a f-processor. The result is that the microprocessor-based control panel performs its function very well.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.164-173
• /
• 2001

In this paper, we have designed and implemented a new hard embedded real-time system to satisfy hard real-time constraints in moving independently. Real-time kernel should be small size, fast and predictable. Because of the great variety of demands on real time scheduling, a real time kernel should also include a flexible and re-programmable task scheduling discipline. In this paper, we present that real-time applications should be split into small and simple parts with hard real-time constraints. To satisfy these properties, we designed real-time kernel and general kernel, that have their different properties. In real-time tasks, interrupt processing should be run. In general kernel, non real time tasks or general tasks are run. The efficiency of the proposed hard embedded real-time system is shown by comparison results for performance of the proposal real time kernel with both RT-Linux and QNX.

• The Journal of Information Technology
• /
• v.4 no.2
• /
• pp.25-36
• /
• 2001

In this paper, we present the development of distributed dual real-time kernel system. This paper proposed that real-time applications should be split into small and simple parts with real-time constraints, Following this concept we have designed to preserve the properties of both hard real-time kernel and general kernel. To satisfy these properties, we designed real-time kernel and general kernel, that have their different properties. In real-time tasks, interrupt processing should be un. In general kernel, non real-time tasks or general tasks are run. We compared the results of this study for performance of the proposal real-time kernel with both RT Linux 0.5a and QNX 4.23A, that is, of interrupt latency scheduling precision and message passing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.113-119
• /
• 2005

The methods that are used for receiving data from attached devices under real-time preemptive multi-task operating system (OS) by general processors can be categorized as polling and interrupt driven. The technical approach to these methods may be different due to the application specific scheduling policy of the OS and the programming architecture of the flight software. It is one of the most important requirements on the development of the flight software to process the data received from satellite subsystems or components with the exact timeliness and accuracy. This paper presents the analysis of the I/O method of device related scheduling mechanism and the reliable data I/O methods between processor and devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.739-746
• /
• 2002

In this paper, a new visual telephone system which has a differential task interrupt transfer feature for real time video phone service is presented. Owing to the result of Interrupt transfer of different speed according to the time critical degree of tasks, the flow of audio and video data stream can be kept as constant speed in other word that means video phone services are carried out in real time. The ITU-T H.32x visual telephone recommendations are first analyzed, and the unsatisfactory items of existing systems are second inquired the cause, such as performance, quality. And then the design concept and ideas which enable it to solve them are third devised, the next, the new architecture of visual telephone system for real time video phone source are designed, which make it possible to solve the existing problems by means of different tasks interrupt transfer method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.119-119
• /
• 2003

• Electric Engineers Magazine
• /
• s.163
• /
• pp.58-59
• /
• 1996

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.151-153
• /
• 1998

사용자 레벨 입출력은 유연성이 있고 효율적인 디바이스 드라이버를 만들 수 있게해주기 때문에, 내장 실시간 시스템에서 그 중요성이 더해가고 있다. 내장 실시간 시스템에서 사용자 레벨 입출력을 지원하기 위해서는 운영체제가 입출력 장치에서 발생한 외부 인터럽트를 프로세서에 예측 가능하고 효율적인 방법으로 전달할 수 있는 방법을 제공해야 한다. 본 논문에서는 새로운 사용자 레벨 시그널 처리 기법을 기반으로 한 효율적인 사용자 레벨 입출력 기법을 제안한다. 제안된 기법은 동적 가상 쓰레드 바인당(dynamic virtual binding)과 스케줄링 이벤트 업콜(scheduling event upcall)등의 다중 쓰레딩을 지원하기 위한 커널 구조를 이용하여 기존 시그널 처리의 문제점을 해결한다. 본 논문에서는 제안된 기법은 ARX실시간 운영체제상에 구현하여 그 성능을 측정하였다. 실험결과 제안된 기법은 적은 부하로 외부에서 발생한 인터럽트를 사용자 프로세서에 예측 가능한 시간에 전달한다.