• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.05a
• /
• pp.66-74
• /
• 1999

일반적으로 압출용 빌렛트제조에는 빌렛트상하의 품질변화로 수평연속주조법이 사용되지 않고 있지만 전자기교반법을 이용할 경우 이러한 단점이 없어진다. 따라서 전자기교반장치를 설치한 수평연속주조장치를 이용하여 연주빌렛트를 제조하였다. 최대자속밀도가 1000Gauss 인 전자기교반장치를 설계 제작하였으며, 간접냉각방식의 흑연몰드에서 알루미늄합금을 사용하여 건전한 연주빌렛트를 제조할 수 있는 여러 공정조건을 조사 검토하여 직경 70mm의 기포가 없고 표면이 미려한 등축정을 가진 연주빌렛트를 제조하였다. 인출속도에 따른 수평 연속주조 빌렛트의 표면, 용탕유동라인 및 조직을 검토한 결과 평균인출속도 20mm/min에서 40mm/min까지 아주 미려한 표면특성을 가졌으며, 인출속도가 빠르면 유동라인이 표면에서 중심 쪽으로 완만한 기울기를 가지게 되어 표면응고층이 얇아져 빌렛트가 고액계면에서 끊어지게 되며, 조직미세화는 인출속도가 클수록 미세화되었으나, 결정구상화정도는 인출속도가 빠를수록 악화되었다.

• The KIPS Transactions:PartD
• /
• v.18D no.1
• /
• pp.1-8
• /
• 2011

The cache structure, which is designed for assuring fast accesses to frequently accessed data, resides on the various levels of computer system hierarchies. Many studies on this cache structure have been conducted and thus many page-replacement algorithms have been proposed. Most of page-replacement algorithms are designed on the basis of heuristic methods by using their own criteria such as how recently pages are accessed and how often they are accessed. This data-retrieval process in computer systems is analogous to human memory retrieval process since the retrieval process of human memory depends on frequency and recency of the retrieval events as well. A recent study regarding human memory cognition revealed that the possibility of the retrieval success and the retrieval latency have a strong correlation with the frequency and recency of the previous retrieval events. In this paper, we propose a novel page-replacement algorithm by utilizing the knowledge from the recent research regarding human memory cognition. Through a set of experiments, we demonstrated that our new method presents better hit-ratio than the LRFU algorithm which has been known as the best performing page-replacement algorithm for DBMS caches.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.775-780
• /
• 2016

Recently, photovoltaic industry needs a new design of Czochralski (Cz) process for higher productivity with reasonable energy consumption as well as solar cell's efficiency. If the process uses the large size reactor for increasing productivity, it is possible to produce a 12-inch, rather than the 8-inch. Also the continuous czochralski process method can be maximized to increase productivity. In this study, it was designed to improve the yield value of ingot with optimal condition which reduce consumption of electrical power. It has increased the productivity of the 12-inch ingot process condition by using CFD simulation. I have found optimal growth rate, by comparing each growth rate the interface shape, Temperature gradient, power consumption. As a result, the optimal process parameters of the growth furnace has been derived to improve for the productivity and to reduce energy. This study will contribute to the improvement of the productivity in the solar cell industry.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.1033-1041
• /
• 1990

본 연구에서는 금속의 응고과정에 수반되는 고체와 액체의 밀도차에 의한 체 적수축을 고려하여 원봉내에서의 일방향 응고과정에 대한 수치해석을 하였다. 상변 화면에서 체적수축에 의한 중력방향으로의 액상 전체운동(bulk motion)과 원봉의 인출 속도 및 주형벽면에서의 경계조건이 금속내부의 온도분포와 상경계면의 이동속도에 미 치는 영향에 대해 연구하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1308-1318
• /
• 1995

The influence of varying rotation speed of both crystal and crucible was numerically investigated for the Czochralski silicon-crystal growth. Based on a simplified model assuming flatness of free surfrae, the Navier-Stokes Boussinesq equations were employed to identify the flow pattern, temperature distribution as well as the shape of the melt/crystal interface. The present results showed that the interface shape was relatively convex with respect to the melt at lower pulling rate and tended to be concave as the pulling rate increased. In particular, the experimentally observed gull-winged shape of the interface was qualitatively in agreement with the predicted shape. The rotation of crystal alone little affected the growth system. When the rotation speed of the crucible was increased, there occurred inversion of the interface shape from convex to concave pattern. At rapid rotation of the crucible, an interesting channel formation was predictied primarily due to the assumption of laminar flow.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.239-245
• /
• 1995

Mn-Zn ferrite thin films were deposited on $SiO_2(1000 \AA)/Si(100)$ by ion beam sputtering using a single ion source. A mosaic target consisting of a single crystal(ll0) Mn-Zn ferrite with a Fe metal strip on it was used. As-deposited films without oxygen gas flow have a wiistite structure due to oxygen deficiencies, which originated from the extra metal atoms sputtered from the metal strips during deposition. The as-deposited films with oxygen gas flow, however, have a spinel structure with (111) preferred orientation. The crystallization of thin films was maximized at the ion beam extraction voltage of 2.lkV, at which the deposited films are bombarded appropriately by the energetic secondary ions reflected from the target. As the extraction voltage increased or decreased from the optimum value, the crystallinity of thin films becomes poor owing to a weak and severe bombardment of the secondary ions, respectively. Crystallization due to the bombardment of the secondary ions was also maximized at the beam incidence angle of $55^{\circ}$. The as-deposited ferrite thin films with a spinel structure showed ferrimagnetism and had an in-plane magnetization easy axis.

• Journal of Korea Foundry Society
• /
• v.21 no.1
• /
• pp.41-47
• /
• 2001

Computer simulation of the solidification grain structure was applied to the casting process by using CA-DFDM. The Direct Finite Difference Method (DFDM) for temperature field calculation and latent heat treatment was coupled with Cellular Automaton (CA) method for the grain growth. 2-dimensional simulation of the solidification grain structures and calculation of the concentration fields were carried out and the calculated concentration distributions were compared with exact solution. Castings having complex geometries such as turbine blades were applied for 3-dimensional CA-DFDM. Effects of grain selector and mold extraction speed on the solidification grain structures in the turbine blade were examined.

• Annual Conference on Human and Language Technology
• /
• 1996.10a
• /
• pp.114-122
• /
• 1996

그림자극의 명명에 있어서 이름의 의미유사성, 음운유사성, 그리고 처리부담(말속도, 기억 부담)이 말 실수 오류수와 명명 시간에 주는 영향을 알기 위해 2개의 실험이 실시되었다. 의미(유사/상이), 음운(유사/상이) 변인에 추가하여 실험 1에서는 말속도(330ms, 385ms, 770ms)의 변인이, 실험 2에서는 인지적 부담(높음/낮음)의 변인이 조작되었다. 두 실험의 결과, 의미유사성과 음운유사성, 그리고 인지적 처리 부담이 말 실수의 양과 그림자극 명명 시간이 증가시킴이 드러났다. '의미유사' 조건 및 '음운유사 조건'과 '의미-음운 모두 유사' 조건간의 말실수의 양의 차이는 말 산출 과정에서의 어휘 인출 과정에 대한 '독립적 2단계 모형'과 '활성화 상호작용 모형' 중 전자에 의해 더 잘 설명될 수 있음이 논의되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.46-46
• /
• 1999

터보분자펌프(turbomolecular pump, TMP)는 각종 연구장비, 반도체 제조장치, 가속기, 핵융합 실험 장치 등 여러 분야에서 가장 널리 쓰이는 고진공 펌프로서 자리잡고 있다. 이런 TMP의 광범위한 사용에도 불구하고 성능평가에 관한 통일된 규격이 마련되어 있지 않다. 국제 규격협회(ISO)의 터보분자펌프 성능평가방법 시안을 토대로 제정중인 KS 규격은 아직 실험적인 근거를 자체적으로 가지고 있지 못하므로 앞으로 각 항목들에 대한 많은 실험이 수행되어야 한다. TMP의 성능을 나타내 주는 항목들 중 배기속도(pumping speed)와 압축비(compression ratio)는 가장 중요한 것들로서 다른 고진공 펌프 및 TMP 상호간의 성능을 비교할 수 있는 기본 항목이라 할 수 있다. 본 실험에서는 종래의 단순 TMP와 큰 기체유량에서도 안정된 배기속도를 유지하는 복합터보분자펌프(compound molecular pump, CMP)의 배기속도와 압축비 및 임계배압(critical backing pressure)을 KS 규격안대로 시험 평가하여 안의 평가방법과 기준의 타당성을 검토하고, 두 가지 다른 방식의 펌프에 적용할 수 있는지를 검토하였다. TMP 및 CMP 흡기구에 표준용기를 부착하고 수소 및 질소 기체를 사용하여 흡기구 압력을 변화시키면서 배기속도 및 압축비를 측정하고 배기구 압력을 변호시키면서 최대압축비 및 임계배압을 측정하였다. 흡기구의 압력측정에는 인출형 전리진공계(EG)를 사용하였고, 배기구의 압력측정은 전기용량의 격막진공계(CDG)와 피라니 진공계로 측정하였다. 진공계는 모두 회전식 점성진공계(SRG)로 교정한 후 사용하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.148-155
• /
• 2006

Portable embedded systems which mainly handle multimedia applications involve the problem that frequent accesses to fetch data from memory make running time increased. To cope with the problem, embedded processors have adopted data prefetching schemes. From a power point of view, which is a main performance indicator of embedded systems, this paper analyzed to investigate how data prefetching schemes influence on system's performance. To solve the problem, we proposed a power-consumption analysis model of a memory system with data prefetching scheme and measured the power dissipated during running application programs. As a result data prefetching schemes have application program's running time reduced but have system's power increased. Also we proposed a performance analysis model considering execution time and power consumption for embedded system with data prefetching schemes.