• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.587-594
• /
• 2023

In this paper, we present the design and optimization process of an on-body microstrip patch antenna with a paired T-type defect for monitoring fracture recovery of human legs. This antenna is designed to be light, thin and compact despite the improvement of return loss and bandwidth performance by adjusting the size of the T-type defect. The structure around the applied human leg is structured as a 5-layer dielectric plane, and the complex dielectric constant of each layer is calculated using the 4-pole Cole-Cole model parameters. In a normal case without bone fracture, the return loss of the on-body antenna is -66.71dB at 4.0196GHz, and the return loss difference ΔS₁₁ is 37.95dB when the gallus layer have a length of 10.0mm, width of 1.0mme, and height of 2.0mm. A 3'rd degree polynomial is presented to predict the height of the gallus layer for the change in return loss, and the polynomial has a very high prediction suitability as RSS = 1.4751, R² = 0.9988246, P-value = 0.0001841.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1027-1032
• /
• 2018

Recently, new content for e-leisure, including e-sports and e-games, has become necessary. To meet this requirement, e-leisure mobile AR studies which track human are underway. The tracking performance at long distances is important because e-leisure mobile AR is used in outdoor environments. However, conventional mobile AR applications such as SNOW and Snapchat have the disadvantage of low tracking performance at long distances. Therefore, we propose an e-leisure mobile AR in outdoor environments. The proposed e-leisure mobile AR can estimate the position of the head in outdoor environments at long distances by using color markers and the human body ratio, and then augment a virtual object at the estimated position. The performance of the proposed e-leisure mobile AR was evaluated by measuring the tracking performance and processing time.

• Journal of the Korean Society of Costume
• /
• v.57 no.4 s.113
• /
• pp.9-17
• /
• 2007

Somatotype is human body shape and physique type which can be classified not only by the size, but also by the shape or posture of the body. Postural variations in the alignment of the back, shoulder, and neck can have an adverse effect on the fit of garments designed to hang from the shoulders. There have been some previous studies about the lateral upper torso by analyzing photographic measurements. In this study, 3D body scan images were used to classify the side somatotype of upper lateral method even though they are major data in the classification of upper torso. This study focused on following objective.; 1) To apply new and developing technology into the apparel industry analyzing 3D body scan images. 2) To classify upper laterla torso using the data through the new improver technology, 3D body scanner. 3) To propose basic materials for well fitted garments for each type of figure. The test subjects for this study were two hundreds nine female aged 19 years and up who were recruited in Cornell university body scan research team. Seventeen Variables(12 angles, 5 lengths) out of 3D body scan data were measured based on these landmarks and applied to analyze. The result of factor analysis indicated that 6 factors were extracted through factor analysis and orthogonal rotation by the method of Varimax and those factors comprise 62.5% of total variance. And the somatotype of upper body is classified into 3 types of figures according to cluster analysis; Bent forward posture, Straight posture, Swayback posture. Future study could be addressed about the somatotype of body by the age group based on the large database with wide variety of age.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.4
• /
• pp.28-34
• /
• 2010

In this paper, we proposes a emergency medical information system for predicting emergency situation by using the body's vital signs. Main research of existing emergency system has focused on body sensor networks. The problem of these studies have a delay of the emergency first aid since occurring of an emergency situation send a message of emergency situation to user. In the serious situation, patients of these problem can lead to death. To solve this problem, it need to the prediction of emergency situation for doing quickly the First Aid with identify signs of a pre-emergency situations until an emergency occurs. In this paper, the sensor network technology, the security technology, the internet information retrieval techniques, data mining technology, and medical information are studied for the convergence of medical information systems of the prediction of emergency situations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.3815-3826
• /
• 2011

TThis study was undertaken to make trial costumes of ball jointed dolls for promoting the beauty of Korean cultural product with historical research of upper class ladie's costume from late Goryeo to early Joseon, the very unknown period in the Korean costume history. The ladies' costume from late Goryeo to early Joseon are characterized by their full silhouette, fusion with clothings of Yuan and Ming, revival of early Goryeo styles, well-developed weaving skill of ramie, a showy costume from Buddhist civilization. After investigation of researcher with literature, painting, and relics in 13-14C, 8 clothing items were outsourced totally. Items were formed as a set concept, but consumer can choose each costume as an single item and can make varied mix also. Dart, small ties, and thick fabrics were used in doll costumes partly because ball jointed doll's body has different characteristics from that of human beings. Developing research of manufacturing company's system for ready-made product remains to be considered in the future.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.265-272
• /
• 2020

The body odor as well as the skin changes has become an important issue. Humans leave respective specific odors dependent on sex and age; The odor has been known to affect social relationship of human. In this study, we wanted to confirm the possibility as parameters to evaluate body odor into existing odor evaluation methods by experts. The 15 subjects, aged from 50 to 61 years wore cotton t-shirts for 72 hours and collected body odor. The cotton t-shirts containing body odor were used for sensory evaluation and EEG measurement by the odor experts. In order to evaluate body odors of each subject, an odor sensory evaluation and electroencephalogram (EEG) were conducted by odor exports and the correlation in between two assessments was analyzed. Pearson correlation analysis shows negative correlation of the sensory evaluation versus 'Excitement' in EEG parameter (r = - 0.649, p = 0.009) and positive correlation of the sensory evaluation versus 'Stress' in EEG parameter (r = 0.704, p = 0.003). In conclusion, it is considered that the evaluation of body odor through EEG measurement can be used as a method to complement the odor evaluation by experts.