• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.202-207
• /
• 2013

Bioimpedance involves a lot of information related to living tissue. If there is alteration in bio tissue, its electrical characteristics also change. It is to study electrical characteristics of pork tenderlion in using a HP-4194A Impedance/Gain-phase analyzer instrument and electrical characteristics changes by graded radiation exposure dose. The results were as follow 1. Electrical characteristics of pork tenderlion in repeated measurement had high precision within ${\pm}5$% of coefficiency of variability. 2. During the measurement impedance absolute value and phase alteration did not show statistically significant difference.(p>0.05) 3. While impedance phase of electrical characteristics associated with frequency change was almost stable, impedance absolute value was in inverse proportion to frequency that means high inverse correlation of -0.096(r). 4. Impedance absolute value dropped in radiation exposure dose. The alteration of the value did not show statistically significant difference in 1 Gy, 2 Gy and 4 Gy.(p>0.05) However in radiation exposure dose of 10 Gy, the decrease of impedance absolute value was significantly different.(p<0.05) 5. Impedance phase according to radiation exposure dose change did not show statistically significant difference in 1 Gy, 2 Gy, 4 Gy, and 10 Gy(p>0.05).

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.905-910
• /
• 2002

4-Hydroxyalkenals are cytotoxic aldehydes generated by the oxidation of n-6 and n-3 polyunsaturated fatty acids. To evaluate the potential risk of 4-hydroxyalkenals on Koreans, quantitative data of various oils are necessary. Simultaneous monitoring of 4-hydroxyhexenal and 4-hydroxynoneal in 39 samples including new and used ones through single ion monitoring mode of GC/MS detected both aldehydes in all samples tested, ranging from 0.21 to 26.9 nmol/g for 4-hydroxy-2-hexenal and 0.06 to 56.6 nmol/g for 4-hydroxy-2-nonenal. Frying oils collected from local markets showed 2.28-7.90 and 8.31-30.5 nmol/g of 4-hydroxyhexenal and 4-hydroxynoneal, respectively. National health and nutrition survey data were employed to determine the exposure effect to these 4-hydroxyalkenals from the four most consumed oils in Korea. Daily exposures to hydroxyalkenals excluding possible exposure from fried food were $1.9\;{\mu}g$ from soybean oil, $0.5\;{\mu}g$ from sesame oil, $0.2\;{\mu}g$ from corn oil, and $0.1\;{\mu}g$ from perilla oil. Due to the increasing consumption of polyunsaturated fatty acids in Korea, these data may provide valuable information for evaluating possible physiological effects of 4-hydroxyalkenals from vegetable oils.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.435-442
• /
• 2014

This study investigated many factors which had to be considered importantly in space planning for the cultural contents exhibition hall on the basis of establishment cases at this time that cultural contents were considered very importantly in the national economy. It must be a priority to set up the concept of the exhibition space which can encompass exhibition spaces, exhibits, the approach to experience exhibitions and others for the effective planning for exhibition spaces showing cultural contents. Visitors' moving lines should be planned based on that concept setting. It is necessary to reflect human attributes that people detect environmental information and perceive the environment through their sensory organs and plan moving lines considering visitors' cognitive, emotional and psychological factors which they can feel according to the temporal order. In addition, this study led visitors to respond exhibits through their five senses and increased the effects that visitors appreciated exhibition spaces, actively getting out of the way that visitors experienced exhibitions, which might be limited to sight. This study will be able to provide specific space planning methods related to the establishment of cultural industry-based professional exhibition halls which have been increased day by day at this time that culture-based industries are considered to be important. Moreover, it will be helpful in reducing the trial and effort factor in the exhibition hall establishment project.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.2 no.1
• /
• pp.9-19
• /
• 1996

Type I, II, III are regarded as "true" joint receptors, type IV is considered a class of pain receptor. Type I, II and III mechanoreceptors, via static and dynamic input, signal joint position, intraarticular pressure changes, and the direction, amplitude, and velocity of joint movements. Type I mechanoreceptor subserve both static and dynamic physiologic functions. Type I are found primarily in the stratum fibrosum of the joint capsule and ligaments. Type I receptors have a low threshold for activation and are allow to adapt to changes altering their firing frequency. Type II receptors have a low threshold for activation. These dynamic receptors respond to joint movement. Type II receptors are thus termed rapidly adapting. Type II joint receptors are located at the junction of the synovial membrane and fibrosum of the joint capsule and intraarticular and extraarticular fat pads. Type III receptors have been found in collateral ligaments of the joints of the extremities. Morphologically similar to Golgi tendon organ. These dynamic receptors have a high threshold to stimulation and are slowly adating. Type IV receptors possess free nerve ending that have been found in joint capsule and fat pads. They are not normally active, but respond to extreme mechanical deformation of the joint as well as to direct chemical or mechanical irritation. Small amplitude oscillatory and distraction movements(joint mobilization) techniques are used to stimulate the mechanoreceptors that may inhibit the transmission of nociceptors stimuli at the spinal cord or brain stem levels.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.3
• /
• pp.237-242
• /
• 2016

The major advantage of slip-ring technology in Spiral CT is that it facilitates continuous rotation of the x-ray tube, so that volume data can be acquired from a patient quickly. Not only for such a fast scan, but also for the dose reduction purpose, high signal-to-noise ratio and fast data acquisition system is required. In this study, we have built a multi-channel photodetector and multi-channel data acquisition system for CT application. The detector module consisted of CdWO4 crystal and Si photodiode in 16 channels. For the performance test of the preamplifier stage, both the transimpedance and switched integrator types are optimized for the photodetector modules. Switched integrator showed better noise performance in the limited bandwidth which is suitable for the current CT application. The control sequence for data acquisition and 20 bit ADC is designed with VHDL(Very High Speed Integrated Circuit Hardware Description Language) and implemented on FPGA(Field Programmable Gate Array) chip. Our Si photodiode detector module coupled to CdWO4 crystal showed comparable signal with other commercially available photodiode for CT. Switched integrator type showed higher SNR but narrower bandwidth compared to transimpedance preamplifier. Digital hardware is designed by FPGA, so that the control signal could be redesigned without hardware alteration.

• Journal of Life Science
• /
• v.23 no.2
• /
• pp.290-298
• /
• 2013

The genus Mycobacterium includes crucial animal and human pathogens such as Mycobacterium tuberculosis, Mycobacterium leprae, and Mycobacterium bovis. Although it is important to understand the genetic basis for their virulence and persistence in host, genetic analysis in mycobacteria was hampered by a lack of sufficient genetic tools. Therefore, many functional vectors as molecular genetic tools have been designed for understanding mycobacterial biology, and the application of these tools to mycobacteria has accelerated the study of mechanisms involved in virulence and gene expression. To overcome the pre-existing problems in genetic manipulation of mycobacteria, this paper reports new vector systems as effective genetic tools in Mycobacterium smegmatis. Three vectors were developed; pKOTs is a suicide vector for mutagenesis containing a temperature-sensitive replication origin (TSRO) and the sacB gene encoding levansucrase as a counterselectable marker. pMV306lacZ is an integrative lacZ transcriptional fusion vector that can be inserted into chromosomal DNA by site-specific recombination. pTnMod-OKmTs is a minitransposon vector harboring the TSRO that can be used in random mutagenesis. It was demonstrated in this study that these vectors effectively worked in M. smegmatis. The vector systems reported here are expected to successfully applicable to future research of mycobacterial molecular genetics.

• Membrane Journal
• /
• v.31 no.2
• /
• pp.101-119
• /
• 2021

The demand for clean water is virtually present in all modern human societies even as our society has developed increasingly more advanced and sophisticated technologies to improve human life. However, as global climate change begins to show more dramatic effects in many regions in the world, the demand for a cheap, effective way to treat wastewater or to remove harmful bacteria, microbes, viruses, and other solvents detrimental to human health has continued to remain present and remains as important as ever. Well-established synthetic membranes composed of polyaniline (PANI), polyvinylidene fluoride (PVDF), and others have been extensively studied to gather information regarding the characteristics and performance of the membrane, but recent studies have shown that making these synthetic membranes conductive to electrical current by doping the membrane with another material or incorporating conductive materials onto the surface of the membrane, such as allotropes of carbon, have shown to increase the performance of these membranes by allowing the adjustability of pore size, improving antifouling and making the antibacterial property better. In this review, modern electrically conductive membranes are compared to conventional membranes and their performance improvements under electric fields are discussed, as well as their potential in water filtration and wastewater treatment applications.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.185-190
• /
• 2019

Compression stockings are widely used for prevention of varicose vein. Depending on manufacture, there are diverse types of compression stockings available. Most common type of compression stocking might be the one cover calf of a lower leg which has 20~30 mmHg pressure. Despite being widely used, possible side effects that may occur by wearing compression stockings have not been studied much. We analyzed for a long wearing effect of compression stocking. Participants wore the compression stocking over one leg for 7 days. During the period, all the participants did their ordinary works wearing the compression stocking. Electrocardiogram (ECG), ankle-brachial index (ABI), blood pressure (BP), and electromyogram (EMG) were measured at 0 day, 3rd day and 7th day. There was no effect of wearing compression stockings from ECG, ABI or BP. Only EMG that was measured on the covered muscle increased proportionally to the wearing time. Interestingly, EMG from the opposite leg that had never been covered by compression stocking decreased in proportion to the wearing date. These results suggest wearing a compression stocking for varicose vein may cause unintentional increase or decrease of EMG from the wearing or non-wearing legs, respectively.

• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.269-282
• /
• 2021

As the distribution of 3D content such as augmented reality and virtual reality increases, the importance of real-time computer animation technology is increasing. However, the computer animation process consists mostly of manual or marker-attaching motion capture, which requires a very long time for experienced professionals to obtain realistic images. To solve these problems, animation production systems and algorithms based on deep learning model and sensors have recently emerged. Thus, in this paper, we study four methods of implementing natural human movement in deep learning model and kinect camera-based animation production systems. Each method is chosen considering its environmental characteristics and accuracy. The first method uses a Kinect camera. The second method uses a Kinect camera and a calibration algorithm. The third method uses deep learning model. The fourth method uses deep learning model and kinect. Experiments with the proposed method showed that the fourth method of deep learning model and using the Kinect simultaneously showed the best results compared to other methods.

• Clean Technology
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2022

Nanoparticles are used in various fields such as chemistry, medicine, the environment, and information and communication. With the increasing use of engineered nanomaterials, exposure to nanoparticles is expected to increase in the workplace and the environmental media. However, while nanotechnology industries are expanding, research on the exposure assessment of nanomaterials to humans and the environment is only at a beginning stage. Especially, if nanoparticles with a size of 100 nm or less that are contained in nano-products are released unintentionally, they may pose potential risks to the human body through breathing or skin exposure. Therefore, in this work, the possibility of potential exposure of nanoparticles moving from the laboratory to the office was confirmed, and nanoparticle safety guidelines are proposed. A nano-collector was used to detect nanoparticles in the atmosphere, and through use of a scanning mobility particle sizer it was found that nanoparticle concentrations in the laboratory and the office tended to be similar. On the assumption that nanoparticles attached to a lab-coat move out of the laboratory, a lab-coat to which nanocarbon black was attached was shaken and the concentration of the remaining particles on the lab-coat determined. The results confirmed that sufficient amounts of nanoparticles attached to the lab-coat could move from the laboratory to the office along the path of a researcher; thus, safety guidelines for the handling of lab-coat nanoparticles are required.