• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1987.11a
• /
• pp.47-74
• /
• 1987

현재 엘리베이터용 worm gear의 wheel로써 가장 많이 사용되고 있는 것은 인청동이다. 일반적으로 청동에 인의 함량이 0.05% - 0.5% 정도 잔류하는 인청동은 용탕의 유동성이 좋아지고, 합금의 강도, 경도가 증가하며 내마모성, 탄성이 증가한다. 또한 P는 극소량 Cu 중에 고용하나 그 외에는 경하고 취약한 $Cu_3P$상으로 존재하고, P의 함유에 따라 Sn의 고용도가 저하하므로 주조 조직중에 $\delta$상($Cu_{31}Sn_8$)이 증가하여 Sn을 증가한 때와 같이 경도가 커지는 효과가 있다. 이같이 기지상 중에 간단한 3원 공정부 ($\alpha + \delta + Cu_3P$)상이 산재하여 있어 이것이 마찰상대면을 지탱하여 내마모 역할을 하기 때문에 인청동이 내마모 재료로써 많이 쓰이고 있는 것이다.

• Journal of Korea Foundry Society
• /
• v.27 no.5
• /
• pp.217-220
• /
• 2007

절삭특성은 재료를 원하는 형상으로 가공하기 위해 재료의 불필요한 부분을 제거할 경우 그 가공성이 쉽거나 어려움에 대한 정도로 전의될 수 있는데 동합금 소재의 절삭특성은 절삭시 발생된 칩의 형상이나 길이를 측정하거나 또는 공구계에 부착된 토오크 미터에 의해 절삭력을 간접적으로 측정하는 방법 등이 사용되어 오고 있다. 상기의 평가방 법은 절삭특성의 간접적인 평가방법이라는 한계와 정확도에 문제가 있는 실정이다. 본 연구에서는 압전형 공구동력계(Piezoelectric Tool Dynamometer)를 쾌삭인청동합금 피절삭물에 직접 부착하여 절삭가공시 절삭력은 정량적으로 직접 측정하고자 하였다. 쾌삭인청동합금의 소둔 열처리 시간이 증가할수록 결정립의 성장에 의한 연화현상과 납입자의 군집화(Clustering)는 관찰되었으나 그로 인한 절삭력 및 절삭에 필요한 에너지의 변화는 뚜렷하지 않았다.

• The Korean Publising Journal, Monthly
• /
• s.223
• /
• pp.2-2
• /
• 1997

청동활자의 혁신은 고려인들에 의해 이뤄졌다. 활자인쇄술의 전파에도 한국인들의 공헌이 부분적으로 있었다. 실용적인 금속활자는 타르비츠를 거쳐 뉘른베르크, 스트라스부르그, 마인츠 등으로 전파된 것으로 보인다.

• Tribology and Lubricants
• /
• v.25 no.5
• /
• pp.330-334
• /
• 2009

Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.

• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.309-313
• /
• 2008

To investigate the antibacterial activity of the traditional bronze alloy Yugi, the cultures of Salmonella spp., Escherichia coli O157, Enterobacter sakazakii, and Bacillus cereus were exposed to the metal coupons of bronze, copper, tin, and stainless steel, and the sterilizing activities were analyzed. Antibacterial efficacy of copper coupon toward S. Typhimurium, E. coli, and E. sakazakii were the highest among them and those were followed by bronze, tin, and then stainless steel in the activity order. However, there was little sterilizing activity on Gram-positive B. cereus. Minimal inhibitory concentrations of cupric ion were 25 ppm for S. Typhimurium, E. coli, and E. sakazakii, and 50 ppm for B. cereus. Yugi bronze alloy showed more rigidity and practicality in comparison with copper, and has been used in Korea. Therefore, the bronze alloy may be more effective to reduce the cross-contamination of S. Typhimurium, E. coli, and E. sakazakii than stainless steel in food processing surface.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1028-1033
• /
• 2004

This study was conducted to improve the quality properties of cream soup in accordance with the added amount of sweet pumpkin and Chungdong pumpkin, roux and chicken stock. As the amount of pumpkin was increased, red (a-value) and yellow (b-value) colors increased but its lightness (L-value) remarkably decreased. Also, there was a significant differences in viscosity, color, appearance and overall preference of sensory evaluation. In pumpkin 150 g (37.5%) added, the degree of total preference was high. As the added amount of roux was increased, red and yellow colors decreased by small margin and there was a significant differences in color, flavor, appearance and overall preference of sensory test. At adding roux of 5 mL (1.5%) showed the highest preference. With the adding chicken stock increase the lightness, red and yellow color decreased. It was found by sensory evaluation that there were significant differences in viscosity, color, flavor, appearance and overall preference. At adding chicken stock 150 mL (37.5%) and milk of 50 mL (12.5%) showed the high score in flavor, appearance and total preference.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.75-79
• /
• 2011

The MOV(Metal Oxide Varistor), a voltage limiting element, has been installed in the SPD(Surge Protective Device) or inside the internal circuit of an electronic appliance for protection of the electric power system and electronic device against electrical surge. Such an MOV is exposed, however, to the risk of the thermal runaway resulting from excessive voltage and deterioration. In this paper, a reciprocal action has been tested and analyzed using a phosphorus bronze switching module and the low-temperature solder. And a short current break characteristic test linked with the circuit breaker has been performed to limit the inrush current when the MOV breaks down. It has been proven that the phosphorus bronze switching module installed inside the internal circuit can improve the safety of the power line system and the electronic device.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.315-319
• /
• 2008

This paper presents the interface bonding characteristics between a phosphor bronze and a steel plate for pin-bush bearings. The pin-bush bearing is an important component in which is used to reduce a friction loss and a wear against the piston pin. The pin-bush bearing is manufactured by hot-pressing a phosphor bronze and a back metal of a steel plate. This paper investigated the bonding interface characteristics in which is manufactured by melting a copper based bronze and a steel plate. The hardness from the inner surface of a bronze to the outer one of steel has been measured using a Vickers hardness tester. The experimental results show that the hardness of a bronze is superior to that of the conventional bronze and the transient hardness of pin-bush bearings is gradually increasing to the hardness of the steel back metal. This means that the bonding interface zone of pin-bush bearings may be fabricated by defusing a bronze to the steel plate due to a density difference between two materials.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.83-100
• /
• 2019

The purposes of this study are to identify the meaning of the geometrical patterns preferred by ancient Korean peoples and to classify them into some groups by their similarity. We investigated various patterns found on clothing and relics from GoJoseon to Goguryeo period, and utilized secondary sources such as history articles, Internet materials and photo and analyzed the associations of the varied patterns found in pottery, handicrafts, and clothing with the ancient cultures. We found the letters (ㅇ, ㅁ, and ㅅ of Korean alphabet, Hangul) preferred by ancestors who worshipped nature to identify the significations attached by them to particular patterns. The results confirm the following: first, the circle pattern indicated the sun, moon, stars in the sky, a bronze mirror, and a man's face. Circles and ovals were also observed to represent the individual souls of the clan or community. Second, square patterns symbolized the land and the patterns that signified the wellbeing of family and the country. Oblique rectangles were more frequently used as they represented a double use of the triangle, a shape that implied mystic power. Third, triangle symbolized regeneration, power, and humanity. While the Neolithic Age jade remnants of hair combs appear not to be irrelevant to the process of comb-shaped pottery production of the time, many fine comb-like lines may be found on bronze mirrors. Through its review of the glorious designs inherited from and established by ancient ancestors, the present research endeavor may help in identifying the spirits and traditions of Korean history.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.877-887
• /
• 1994

Cu-Ni-Si-P alloys have been studied in order to develop connector material which has a favorable combination of strength, electrical conductivity, elastic limit, thermal softening resistence and bend formability. Three kinds of trial alloys with various nickel and silicon content were melted and cast, hot rolled at about $900^{\circ}C$ and cold rolled. Mechanical properties and electrical conductivities of these alloys annealed at $450^{\circ}C$, $500^{\circ}C$ and $550^{\circ}C$ were investigated. An alloy with the composition of Cu-2.7%Ni-0.53%Si-O.O29%P, which shows a favorable combination of high strength and high electrical conductivity, has been developed. Various characteristics of the alloy 1 connector material were evaluated and compared with phospher bronze(C521OR-H) and brass(C26OOR-EH) connector material.