• 한국의류산업학회지
• /
• 제16권1호
• /
• pp.153-159
• /
• 2014

This study evaluates the changes of the subjective hand, preference, comfort and mechanical properties of tricot based artificial suede made from sea-island type micro fibers according to raising condition. The subjective hand and the preference of raised suede for jacket were rated by the 20's and 30's women experts according to raising cycles. Comfort properties were evaluated by air permeability, water vapor transmission, and thermal transmission. Mechanical properties were measured by the KES-FB system. The subjective hand of artificial suede was categorized into three hand factors: smoothness, warmness and thickness. Smoothness, warmness and thickness perception increased with raising cycles which affected hand preference and luxuriousness perception. The thickness and wale density of suede increased with the number of raising. Suede became more compact and less pliable and less stretchable due to increased fabric thickness; in addition, the surface of suede became smoother and compressive since the surface evenness of suede improved with smaller fiber fineness and an increased amount of naps covered the base fabric. Furthermore, water vapor transmission decreased and thermal insulation increased. The best raising conditions for artificial suede was four cycles in which artificial suede was preferred without changes in physical properties.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.128-137
• /
• 2000

A range of suede-like samples were collected including woven fabric type, nonwoven fabric type, and natural suede(sheep). The surface textures of these suede-like fabrics are rather diverse and different from the plain filament type fabrics since there are a lot of fine surface free fiber ends. Physical and mechanical measurements were carried using the KES equipments. Based on the Kawabata-Niwa translational equation, primary hand values and THV were calculated. Uniaxial tensile tests were performed. Using glossmeter, the reflectance pattern was analyzed at different incidence and receiving angles. In order to capture the surface images of the specimens, a CCD camera and frame grabber connected to a PC were employed. The reflectance uniformity of the images was measured with line-profile analysis and standard deviation values of the profile of the images were calculated. After the multiscale wavelet transfermation, correlation among the transformed image was analyzed at each scale. The reflectance uniformity of the natural suede was better than that of nonwoven type suede, while that of woven type suede was the last among the selected three samples(natural suede, nonwoven type, woven type). The correlation analysis among images has shown the possibility of using the wavelet transformation of the images as one of the measures to detect similarities among the textured specimens.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.309-315
• /
• 2013

This study examines the difference of surface properties according to napping characteristic of artificial suedes, measuring surface structure observation, the contact/non-contact method roughness, warm-cool feeling of touch, and subjective hand evaluation. Surface and cross-section observations showed a discernible difference in fineness, curl, length, mount of napping, and covering power of base fabric. The surface properties of artificial suede evaluated by KES-FB4 showed that the shorter napping length the more smooth surface and the roughness increased reciprocally with friction resistance and surface contour when the nap length reaches a high level. The surface roughness measuring system applied a laser displacement sensor by a non-contact method to assess napping characteristic and the base fabric and napping height. Surface roughness decreased when napping was uniformly covered with base fabric; however, the surface roughness increased specifically with the uneven covering power of the base fabric. For qmax of the suedes, those that had short and smaller amounts of napping increased; however, the napping of length and amount at some stage generated a low qmax value. The warm sensation in all suedes were strongly perceived, but the cool sensation of the perception was lower in the subjective evaluation. Smoothness and softness were perceived when the suede has a long and large amount napping; however, smoothness and hardness were perceived when the suede was short and with the uneven covering power.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.202-210
• /
• 2017

In recent years, the water-based ink have been widely used in various industrial applications due to environmental problems. Dispersibility of the pigment for applications of the water-based ink is the one of the most important technical factors to produce uniform color products. Thus, in this study, the three-roll mill process was used to improve the dispersion of the water-based ink. The results indicated that the three-roll mill reduced the size of pigment particles in the ink more than 50%. In addition, the dispersant showed an important role to maintain the dispersion stability of the pigment in the water-based ink over 120 hours. We also confirmed the optimum contents of the ink stock solution, drying temperature and drying time by the colorimeter and colorfastness tests on produced PET synthetic suedes.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.275-287
• /
• 2018

In recent years, research on the development of eco-friendly synthetic suede based on water-dispersed polyurethane resin and non-fluorine water repellent has been conducted. Synthetic suede has a problem that the fastness to dyeing is greatly lowered after the water-repellent processing at a high temperature of $160^{\circ}C$ because the polyester is dyed with a disperse dye. Therefore, in this study, silica was added to water-dispersed polyurethane resin to improve dye fastness. To distribute the $PUD-SiO_2$ mixture evenly in the water-dispersed polyurethane resin, sufficient stirring was done for a period of time. When the $PUD-SiO_2$ mixture(PUD 1-5%) is applied to the substrate, it is confirmed through SEM that the mixture is uniformly applied without particle condensation. The results showed that silica with a diameter of 4~12nm and BET of $200{\sim}380g/m^2$ had the ability to improve dispersibility and fastness.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.90-90
• /
• 2012

극세섬유는, 1970년대 말부터 일본의 합섬업체들이 천연소재인 Silk를 모방하기 위해 개발을 시작하였으며, 개발된 섬유의 굵기가 0.5d(1denier=1g/9,000m)이하인 것을 말한다. 이후 극세사에 대한 끊임없는 노력으로, 1980년대에는 천연스웨이드 풍의 인조피혁의 제조가 가능한 0.1d이하급 초극세사가 N/P(Nylon/Polyester) 복합방사된 형태로 개발되었으며, 일본, 및 한국 등에서 이들 소재로 제조된 직편물 제품이 첨단 고부가소재로서 호황을 누려왔다. 이러한 초극세사는 다양한 형태로 발전되어왔는데, 해도형(Islands-in-a-Sea Type), N/P(Nylon/PET), P/N(PET/Nylon) 등이 대표적인 형태이며, 가공공정 중에서 분할이 되면서 그 특성을 발현한다고 하여 분할사, 형태에 따라서 N/P 분할사라 하기도 한다. 최근들어 이러한 N/P 분할사는 기존의 의류용 용도뿐만 아니라, Wiping Cloth, 극세사 타울, 항진드기용 침장 등 다양한 비의류용 소재로도 확대 전개되고 있으며, 이렇게 다양화 되어가고 있는 용도에 따른 공정별 최적 가공 방법에 대한 연구가 진행 중이다. 사가공 공정에 있어서는 텍스쳐링 방법이 적용되기도 하는데, 가장 보편화된 텍스쳐링 방법으로는 DTY(Draw Texturing Yarn), ATY(Air Texturing Yarn) 등의 형태가 있으며, 이러한 텍스쳐링 방법은 물성에 민감한 N/P 분할사의 강도, 신도, 분할도에 영향을 미치게 된다. 본 연구에서는 기존의 텍스쳐링 방법이 아닌 Fancy사 형태로 사가공을 하였으며, 직물로 제직하고, 분할 가공하여 직물로써의 물성까지 분석하였다. Fancy사는 색이나 형의 변화로 디자인효과를 준 실을 말하는데, 심사, 부사, 압사로 이뤄지며 의장사, 장식사 등으로 불려지기도 한다. 주요 공정을 보면, 크릴형성용 부사를 500-600T/M으로 가연한 연사를 얻는 제1공정과, 이 가연된 부사와 심사를 합사하는 제2공정 및 합사된 크릴의 뒤틀림을 방지하기 위하여 압사로 크릴을 고정하여 주는 제3공정으로 이루어진다. 사용된 N/P 분할사는 NP30/36dty, NP50/36dty를 사용하였으며, 부사의 오버피드 및 피드되는 사에 따라 각각 8종, 7종의 Fancy사를 제조하여 섬도(Denier), 강도(Tenacity), 신도(Elongation)를 측정하였다. 또한, 이들 사들로 제직 및 분할가공을 하여 인장강도, 인장신도, 인열강도, 마모강도, 공기투과도 등의 물성과 중량, 두께를 측정하였으며, 온도, NaOH 농도, 시간 등의 분할 가공조건에 따른 직물의 인열강도 변화도 측정하였다. 이렇게 공정별 조건에 따른 물성의 변화분석을 통해 추후 N/P의 제품화 전개에 도움이 되고자 하였다.