• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.19-25
• /
• 2004

This study was carried out to investigate a radial distribution of moisture contents (MCs) within a log cross section (LC) during oven-drying of 3 mm-thick circumferential slices cut from several domestic softwoods LCs.For Korean red pine, drying rate of sapwood slices during oven-drying represented much higher values than that of heartwood slices, and so sapwood with higher green MC early reached below fiber saturation point (FSP) rather than heartwood did. However, this distribution of moistures did not last for long duration. For Japanese larch, green MC of sapwood was approximately three times higher than that of heartwood. This similar distribution in MC was lasted until about 20% average MC. The MC was around uniform throughout the sapwood of Ginkgo when green and during oven-drying, although it was somewhat fluctuated. For Japanese cedar, the heartwood with so low moistures around FSP would begin to shrink from the beginning stage of drying, but the sapwood above hygroscopic MC prevents the heartwood from shrinking, and consequently, the heartwood or the transition wood goes into tension stress. The results for Japanese cypress showed that the green MCs of the sapwoods were much lower than those for heartwoods, and then this trend was continued until about 20% in average MC. For Chinese thuja, the green MCs of sapwoods were about 2 times as high as those of heartwood, but this along the radial gradient in MC rapidly became gentle during oven-drying.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.5
• /
• pp.514-520
• /
• 1996

To clarify the proper nitrogen application level for rasing rice infant seedling under different nursery soil, Dongjinbyeo was raised at seedling box with different basal nitrogen level. The results are as follows. The higher the nitrogen level was, the lower emergence rate and the lower establishment rate. The establishment rate was less than 90%, when the nitrogen was more than 2g/box in hill soil and more than 1g/box in paddy soil. The more the nitrogen level was, the higher the seedling height in hill soil, but was higher in the order of N-2, 3, 1 and 0g /box. Leaf number wasn't significantly different between nusery soils and among nitrogen levels when seedling was raised more than 6 days. The endosperm survival rate was decreased as the increased nitrogen level, but wasn't different between the nursery soils. Amount of root was decreased as the increased nitrogen level in paddy soil, but was heavier in the order of N-1, 0, 2 and 3g /box in hill soil. Mat formation was better as the nitrogen level was decreased in all nursery soils. Considering the emergence rate, seedling charactors and mat formation, the proper nitrogen levels seemed to be 2g /box for hill soil and 1g /box for paddy soil.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.167-183
• /
• 2023

Gases originated from the final SNF (spent nuclear fuel) disposal site are very mobile in the barrier and they may also affect the migration of radioactive nuclides generated from the SNF. Mechanisms of gas-nuclide migration in the multi-barrier and their influences on the safety of the disposal site should be understood before the construction of the final SNF disposal site. However, researches related to gas-nuclide coupled movement in the multi-barrier medium have been very little both at home and abroad. In this study, properties of gas generation and migration in the SNF disposal environment were reviewed through previous researches and their main mechanisms were summarized on the hydrogeological evolution stage of the SNF disposal site. Gas generation in the SNF disposal site was categorized into five origins such as the continuous nuclear fission of the SNS, the Cu-canister corrosion, the oxidation-reduction reaction, the microbial activity, and the inflow from the natural barriers. Migration scenarios of gas in porous medium of the multi-barrier in the SNF repository site were investigated through reviews for previous studies and several gas migration types including ① the free gas phase flow including visco-capillary two-phase flow, ② the advection and diffusion of dissolved gas in pore water, ③ dilatant two-phase flow, and ④ tensile fracture flow, were presented. Reviewed results in this study can support information to design the further research for the gas-nuclide migration in the repository site and to evaluate the safety of the Korean SNF disposal site in view points of gas migration in the multi-barrier.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.117-133
• /
• 2010

A hybrid system of soil-nailing and compression anchor is proposed in this paper; the system is composed of an anchor bar (installed at the tip) with two PC strands and a steel bar. After drilling a hole, installing proposed hybrid systems, and filling the hole with grouting material, prestress is applied to the anchor bar to restrict the deformation at the head and/or to prevent shallow slope failures. However, since the elongation rate of PC strand is much larger than that of steel bar, yield at the steel bar will occur much earlier than at the PC strand. It means that the yield load of the hybrid system will be overestimated if we simply add yield loads of the two - anchor bar and PC strands. It might be needed to try to match the yielding time of the two materials by applying the prestress to the anchor bar. It means that the main purpose of applying prestress to the anchor bar should be two-fold: to restrict the deformation at the nail head; and more importantly, to maximize the design load of the hybrid system by utilizing load transfer mechanism that transfers the prestress applied at the tip to the head through anchor bar. In order to study the load transfer mechanism in a systematic way, in-situ pullout tests were performed with the following conditions: soil-nailing only; hybrid system with the variation of prestress stresses from 0 kN to 196 kN. It was found that the prestress applied to the anchor system will induce the compressive stress to the steel bar; it will result in decrease in the slope of load-displacement curve of the steel bar. Then, the elongation at which the steel bar will reach yield stress might become similar to that of PC strands. By taking advantage of prestress to match elongations at yield, the pullout design load of the hybrid system can be increased up to twice that of the soil-nailing system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.21-29
• /
• 2023

In this study, the stress characteristics of temporary fixed steel rods were analyzed in the "temporary fixing system using internal prestressing tension", which is mainly applied to the construction of superstructures by FCM. It was difficult to confirm the changes in initial tensile force in this system because the steel rod was internally connected to the pier and the PSC BOX. Therefore, measurement was performed before and after the completion of each segment using an FBG sensor to measure the change in the micro length of the steel rod. The results of the analysis showed that 75% to 90% of the maximum vertical contraction of the steel rod that occurred until the completion of the cantilever segment occurred in the fixing ~ 1segment, and the maximum loss of initial prestressing force was 39%. Such excessive loss of tension force to 1 segment means that tension is needed to improve the precision of construction during the fixation, and re-tension is needed to secure stability for conduction of cantilever segments after the completion of 1segment. In the 2 ~ last segment, the stress of the steel rod decreased gradually, and in the summer, the decrease in stress tended to partially recover due to the increase in the length of the steel rod corresponding to the increase in the vertical volume of PSC BOX. The dominant factor in the stress change in 2~ last segment in this phenomenon is judged to be the change in the length of the steel rod according to the temperature. Unlike the change in length, the relaxation was 1.2-2.7%, which was mostly offset by the opposite stress corresponding to the temperature stress. Therefore, a plan was proposed to improve the internal stress, such as adjusting the fixation time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.1
• /
• pp.201-230
• /
• 2001

Conserving the recored cultural inheritance is actually the duty of all of us. Above all, the management and conservation of archives and documents is up to archivists who have technical knowledge about archival science. Archivists have to not only conserve archives and documents but also carry out classifying and appraising them in order to define them as current historic ones. The fundamental education about archival science is made up of history and law. Because Archive is the organisation which manage archives and documents produced by legal and administrative actions. Although there are still arguments about technical knowledge and degree archivists have to acquire, most of them prefer the studies related with history and emphasize legal studies to be the general boundary of archivits' ideology and trust. The training course about conservation of archives is conducted in about 9 National Archives of Torino, Milano, Venezia, Genova, Bologna, Parma, Roma, Napoli, Palermo. The training course in 19th was mostly based on the lectures of Phaleography, Diplomatics. There were not the education about archival science yet. Toward the end of 19th and 20th, people stressed the most basic subject in the training course of National Archive was not Phaleography and Diplomatics but archival science. The goal of archival science is to study the institution and organisation transferring archives and documents to Archive. And also it help archivists not wander about with ignorance of organisational and original procedures and divisions but know exactly theirs works. Like this, the studies on institution and organisation have got in the saddle as a branch of archival science since a few ten years. While archival science didn't evoke sympathy among people and experienced the tedious and difficult path in italy and other countries, Archive was managed by experts of other branches. As a result, there were a lot of faults in Archival Science. Specializing training course for Italian archivists came into being under the backdrop of Social Science Institute of Roma National University in 1925. The archival course of universities accomplished by the studies of history, law and economy. And such as Eugenio Casanova and Giorgio Cencetti were devoted archival science was abled to settle down in national archive. The training course for experts of 'archival science, 'Phaleography and Diplomatics' in National Archive of Bologna(Archivio di Stato di Bologna) is one of courses conducted in 17 National Archives in italy. This course is gratuitous and made up of 8 subjects(Archivistica, Paleografia, Diplomatica, Storia dell' Archivio, Notariato e documenti privati, istituzione medievale, istituzione moderna, istituzione contemporanea) students have to complete for two years. Students can receive the degree through passing twice written exam and once oral test. After department of Culture and education finally puts the marks of students, the chief Nationa Archive of Bologna confer the degree of 'archival science Phaleography and Diplomatics' on students passing the exams. This degree authenticates trainees' qualification which enables him to work at the archive in province, district and administrative capital city and archive of comunity and so on. Italian training course naturally leads archivists to keep in contact with valuable cultural inheritance through training in Archive. And it shows the intention to strengthen the affinity with each documents in the spot of archival management before training archivists. Also this is appraised as one of positive policies to conserve the local cultual inheritante in connection with the original qualitity of national archive with testify the history of each region. Traning course for archivist in Italy shows us the way how we have to prepare and proceed it. First, from producing documents to conserving than forever there has introduced 'original order that is to say a general rule to respect the first order given at the time producing documents'. Management of administrative documents is related consistently with one of historical documents. Second, the traning course for archivist is managing around 17 national archives. because italian national archive lay stress not or rducation of theory bus on train for archivest working in the first time of archival science. Third, diplomatics and phaleography for studies about historical document support archives. Forth, the studies on history id proceeding by cooperation between archivist and historian around archive. How our duties is non continuinf disputer who has to conserve and manage document and archives, but traing experts who having ability, vision and flexible thought, responsibility about archivals.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.176-199
• /
• 2020

In 2018, the National Museum of Korea purchased a pair of Japanese folding screens, respectively entitled Gathering on the Year's First "Day of the Rat" and Boating on the Oi River. Both of these two screens (hereinafter collectively referred to as the "NMK edition") have a gold background that bears the seal and ink inscription of Tosa Mitsuyoshi (1700-1772), who served as edokoro azukari, a painter in the court of Kyoto. According to the seller in New York, the screens were brought from Japan to the United States in the early twentieth century, but no other details are known. Each folding screen has six panels. The screen on the right (i.e., Gathering…) depicts "nenohi no asobi," an annual event conducted on the first "day of the rat" (according to the Asian zodiacal calendar), wherein the Kyoto imperial court ventured to the woods to gather pine seedlings. The left screen (i.e., Boating…) shows three boats traveling down the Oi River in Kyoto, representing the ritual known as "mifune" (literally, "three boats"), which involves three boats representing Chinese classical poetry (kansi), Japanese classical poetry (waka), and Japanese imperial music and dance (gagaku). Notably, these two screens are identical in theme and iconography to two screens with the same respective titles that were commissioned by Emperor Komei (1831-1867) and painted by Ukita Ikkei (1795-1859), an artist of the Yamato-e Revivalist School (fukko yamato-e), now in the collection of Sennyu-ji Temple in Kyoto (hereinafter collectively referred to as the "Sennyu edition"). While both of these themes have been painted independently numerous times, the NMK edition and Sennyu edition are the only known cases of the themes being painted as a single set. According to Diary of Official Business Between the Court and Shogunate (the journal of a court official named Hirohashi Kanetane, 1715-1781), Tosa Mitsuyoshi was commissioned in 1760 to replace the fusuma (rectangular sliding panels) of Tsunegoten, one of the buildings of the Kyoto Imperial Palace, which had been built in 1709. Notably, records show that Tsunegoten once contained a series of fusuma painted by an artist of the Kano school on the themes "Outdoor Procession on a Spring Day" and "Three Boats Cruising on the Oi River." Hence, it seems probable that Tosa Mitsuyoshi was influenced by the theme and iconography of the existing fusuma in producing his own folding screens depicting the court's visit to the forest and a cruise on the Oi River. While the practice of collecting pine seedlings on the first "rat day" of the year was an auspicious event to pray for longevity, the mifune ritual was intended to honor the greatest talents of the three aforementioned arts, which were of crucial importance to the court of Kyoto. Folding screens with such auspicious themes were commonly featured at the ceremony to enthrone the emperor or empress. Significantly, the Diary of Official Business Between the Court and Shogunate also records that Tosa Mitsuyoshi, while working as a court artist, produced two pairs of folding screens for the coronation of Empress Go Sakuramachi (1762-1771), which was held in 1763. Hence, research suggests that the NMK edition is one of the pairs of royal folding screens produced at that time.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.87-102
• /
• 1980

In order to investigate the utilization probability of two years old laying hen for W.L. and R.I.R. breeds, carcass weight and percentage were examined and dried old chicken meat products were manufactured for experiments. The results obtained are as follows. 1. Average living body weight were 1,635.40g for the W.L. breeds and 2,289.29g for the R.I.R. breeds and percentage carcass and lean meat for the W.L. were 58.73% and 43.95%, for the R.I.R. 60.34%, 41.98%, respectively. 2. In constitution percentage of carcass on different parts for W.L. and R.I.R. breeds, head were 4.13% and 3.94%, wing 9.97% and 8.62%, breast 32.54% and 20.94%, back 11.35% and 9.75%, thigh 30.75% and 31.34%, hypordermic fat 11.37% and 17.34%, respectively. 3. In constitution percentage of lean meat on different parts for W.L. and R.I.R. breeds, head were 4.03% and 3.95%, wing 9.47% and 9.79%, breast 39.37% and 38.14%, back 11.24% and 9.40%, thigh 36.16% and 38.74%, respectively. 4. In chemical composition of old chicken meat for W.L. breed, moisture was 68.18%, crude protein 22.80%, crude fat 2.70%, extract 5.15% and crude ash 1.18% and for R.I.R. breed, moisture was 68.04%, crude protein 22.18%, crude fat 3.13%, extract 5.45% and crude ash 1.21%. 5. Weight loss in steaming for W.L. at $121^{\circ}C$ for 30min., 60min., and 90min. were 54.91, 56.43 and 58.42%, respectively, and for R.I.R. were 45.23, 47.68 and 49.68%, respectively. 6. The yield of old chicken meat product per a hen were 253.01g for W.L. and 368.64g for R.I.R., the ratio for fresh meat weight and for carcass weight were 35.47% and 26.34% for W.L. breed and 38.25 and 26.83% for R.I.R. breed. 7. In chemical composition of old chicken meat product for W.L., moisture was 16.69%, crude protein 66.16%, crude fat 12.81%, crude ash 4.35%, and R.I.R., moisture 16.11%, crude protein 65.95%, crude fat 13.78% and crude ash 4.57%. 8. To investigate the physical properties which was main factor affecting the product quality, tensile strength, tear strength and elongation rate were measured. The adhesive force of the product made under pressure of $70kg/cm^2$ was similar to those of chipo which was the control product. 9. When measured the color of each protein product, lightness of the product pressed at $70kg/cm^2$ was better than that at $35kg/cm^2$, and the lightness of breast muscle product at $70kg/cm^2$ and chipo was not significant as 16.7% and 16.4%, respectively. Dominant wavelength of product pressed at $70kg/cm^2$ was very similar to chipo which was yellowish orange. 10. In the results of sensory evaluation test containing taste, color, chewing texture and oder of the meat product, when index of chipo as control product was 100, index of breast meat product was higher than that as 118.4, but miscellaneous product was 99.7 and thigh product was 96.2. 11. Summing up the results written above, the meat product utilizing two years old laying hen was compared favorably with its similar food such as chipo on the point of nutrition and physical properties as high protein food, therefore, it was thought that industrialization must be highly appropriate.